Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC5252-2.85YML-TR
詳細を表示 DataSheets

MIC5252-2.85YML-TR

Product Overview

Category

The MIC5252-2.85YML-TR belongs to the category of voltage regulators.

Use

This product is commonly used to regulate voltage in electronic circuits, ensuring a stable and constant output voltage.

Characteristics

  • Voltage regulation: The MIC5252-2.85YML-TR provides precise voltage regulation, maintaining a consistent output voltage even with varying input voltages.
  • Low dropout voltage: It has a low dropout voltage, allowing it to operate efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: This voltage regulator consumes minimal current when there is no load, making it suitable for battery-powered applications.
  • Thermal shutdown protection: It includes built-in thermal shutdown protection, preventing damage due to excessive heat.

Package

The MIC5252-2.85YML-TR comes in a small surface-mount package, which makes it suitable for compact electronic devices.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage, ensuring proper functioning of electronic circuits.

Packaging/Quantity

This voltage regulator is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 16V
  • Output Voltage: 2.85V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 75µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MIC5252-2.85YML-TR has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage Regulation: The MIC5252-2.85YML-TR maintains a constant output voltage, compensating for variations in the input voltage.
  • Current Limiting: It includes current limiting protection to prevent excessive current flow and protect the circuitry.
  • Thermal Shutdown: Built-in thermal shutdown protection prevents overheating and potential damage to the device.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation ensures stable performance of electronic circuits.
  • Low dropout voltage allows efficient operation even with small voltage differentials.
  • Low quiescent current makes it suitable for battery-powered applications.
  • Thermal shutdown protection prevents damage due to excessive heat.

Disadvantages

  • Limited output current capacity (up to 150mA).
  • Restricted input voltage range (2.5V to 16V).

Working Principles

The MIC5252-2.85YML-TR operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. This is achieved through a combination of voltage regulation and current limiting techniques.

Detailed Application Field Plans

The MIC5252-2.85YML-TR finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Embedded systems - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the MIC5252-2.85YML-TR include: - LM1117-2.85 - LT1763-2.85 - MCP1702-2.85

These alternatives can be considered based on specific requirements and compatibility with the target application.

Word count: 446 words

技術ソリューションにおける MIC5252-2.85YML-TR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC5252-2.85YML-TR in technical solutions:

  1. Q: What is the MIC5252-2.85YML-TR? A: The MIC5252-2.85YML-TR is a voltage regulator IC (integrated circuit) that provides a fixed output voltage of 2.85V.

  2. Q: What is the input voltage range for the MIC5252-2.85YML-TR? A: The input voltage range for the MIC5252-2.85YML-TR is typically between 2.7V and 5.5V.

  3. Q: What is the maximum output current of the MIC5252-2.85YML-TR? A: The maximum output current of the MIC5252-2.85YML-TR is typically 150mA.

  4. Q: Can the MIC5252-2.85YML-TR be used in battery-powered applications? A: Yes, the MIC5252-2.85YML-TR can be used in battery-powered applications as it has a low dropout voltage and operates efficiently with low input voltages.

  5. Q: Is the MIC5252-2.85YML-TR suitable for use in automotive electronics? A: Yes, the MIC5252-2.85YML-TR is suitable for use in automotive electronics as it can handle the wide input voltage range typically found in automotive systems.

  6. Q: Does the MIC5252-2.85YML-TR have built-in thermal protection? A: Yes, the MIC5252-2.85YML-TR has built-in thermal shutdown protection to prevent overheating and damage to the IC.

  7. Q: Can the MIC5252-2.85YML-TR be used in low-power IoT devices? A: Yes, the MIC5252-2.85YML-TR is suitable for use in low-power IoT (Internet of Things) devices as it has a low quiescent current and operates efficiently with low input voltages.

  8. Q: What is the package type of the MIC5252-2.85YML-TR? A: The MIC5252-2.85YML-TR is available in a small SOT-23-5 package, which is commonly used for compact electronic designs.

  9. Q: Can the MIC5252-2.85YML-TR be used in audio applications? A: Yes, the MIC5252-2.85YML-TR can be used in audio applications as it provides a stable and regulated voltage output, which is important for maintaining audio quality.

  10. Q: Are there any application notes or reference designs available for the MIC5252-2.85YML-TR? A: Yes, the manufacturer of the MIC5252-2.85YML-TR typically provides application notes and reference designs that can help users understand and implement the IC in their specific technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and conditions of your technical solution. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate and detailed information.