MIC5265-2.8YD5

Product Overview

Category

MIC5265-2.8YD5 belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

• Voltage regulation capability
• Low dropout voltage
• High accuracy
• Low quiescent current
• Thermal shutdown protection

Package

MIC5265-2.8YD5 comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic applications.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

• Input Voltage Range: 2.5V - 6.0V
• Output Voltage: 2.8V
• Dropout Voltage: 150mV (typical)
• Quiescent Current: 30µA (typical)
• Load Regulation: ±0.1% (typical)
• Line Regulation: ±0.05% (typical)
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

MIC5265-2.8YD5 has the following pin configuration:

1. VIN: Input voltage pin
2. GND: Ground pin
3. VOUT: Output voltage pin
4. BYP: Bypass capacitor pin

Functional Features

• Voltage regulation: The MIC5265-2.8YD5 ensures a stable output voltage of 2.8V regardless of input voltage fluctuations.
• Low dropout voltage: With a dropout voltage as low as 150mV, this regulator can operate efficiently even when the input voltage is close to the desired output voltage.
• High accuracy: The device provides high output voltage accuracy, ensuring precise regulation for sensitive electronic components.
• Low quiescent current: The low quiescent current minimizes power consumption when the load is light or idle.
• Thermal shutdown protection: The regulator incorporates thermal shutdown protection to prevent damage due to excessive temperature.

Advantages and Disadvantages

Advantages

• Stable and accurate voltage regulation
• Low dropout voltage enables efficient operation
• Low quiescent current for reduced power consumption
• Thermal shutdown protection ensures device safety

Disadvantages

• Limited input voltage range (2.5V - 6.0V)
• Output voltage fixed at 2.8V, not adjustable

Working Principles

MIC5265-2.8YD5 utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the internal pass transistor accordingly to maintain a constant output voltage.

Detailed Application Field Plans

This voltage regulator finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - Embedded systems - IoT devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC5265-2.8YD5 include: - LM1117-2.8 - LT1763-2.8 - MCP1702-2.8

These alternatives can be considered based on specific requirements and compatibility with the target application.

Word count: 409 words