MIC5305-2.8YD5-TR

Product Overview

Category

MIC5305-2.8YD5-TR belongs to the category of voltage regulators.

Use

This product is commonly used to regulate voltage in electronic circuits.

Characteristics

• Package: The MIC5305-2.8YD5-TR comes in a small form factor package.
• Essence: It provides stable and regulated output voltage for various applications.
• Packaging/Quantity: The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

The specifications of MIC5305-2.8YD5-TR are as follows:

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage: 2.8V
• Output Current: Up to 150mA
• Dropout Voltage: 200mV (typical)
• Quiescent Current: 40µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of MIC5305-2.8YD5-TR is as follows:

1. VIN: Input voltage pin
2. GND: Ground pin
3. EN: Enable pin
4. BYP: Bypass capacitor pin
5. VOUT: Output voltage pin

Functional Features

• Low dropout voltage: The MIC5305-2.8YD5-TR exhibits a low dropout voltage, ensuring efficient power conversion.
• Low quiescent current: With a low quiescent current, this voltage regulator minimizes power consumption when not in use.
• Thermal shutdown protection: The device incorporates thermal shutdown protection to prevent damage due to excessive heat.
• Short-circuit protection: MIC5305-2.8YD5-TR includes short-circuit protection, safeguarding the circuit from potential damage.

Advantages and Disadvantages

Advantages

• Compact size and lightweight design
• Wide input voltage range
• Low dropout voltage
• Efficient power conversion
• Thermal and short-circuit protection

Disadvantages

• Limited output current capacity (up to 150mA)
• Not suitable for high-power applications

Working Principles

MIC5305-2.8YD5-TR operates based on the principle of linear voltage regulation. It takes an input voltage within the specified range and provides a stable output voltage of 2.8V. The device utilizes internal circuitry to regulate the voltage and maintain a constant output even when the input voltage fluctuates.

Detailed Application Field Plans

MIC5305-2.8YD5-TR finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to MIC5305-2.8YD5-TR are: - LM1117-2.8 - MCP1700-2.8 - TPS78228

These models offer similar functionality and characteristics, providing options for different design requirements.

In conclusion, MIC5305-2.8YD5-TR is a voltage regulator with a compact form factor, low dropout voltage, and wide input voltage range. It is commonly used in various battery-powered and portable electronic devices. While it has limitations in terms of output current capacity, it offers efficient power conversion and essential protection features. Designers may also consider alternative models depending on their specific application requirements.