MIC5309-1.5YD6-TR

Product Overview

Category

MIC5309-1.5YD6-TR belongs to the category of voltage regulators.

Use

This product is used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

• Package: The MIC5309-1.5YD6-TR comes in a small form factor package, making it suitable for space-constrained applications.
• Essence: It is an efficient and reliable voltage regulator that ensures stable power supply to connected devices.
• Packaging/Quantity: The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

The specifications of MIC5309-1.5YD6-TR are as follows:

• Output Voltage: 1.5V
• Input Voltage Range: 2.7V to 5.5V
• Maximum Output Current: 150mA
• Dropout Voltage: 200mV (typical)
• Quiescent Current: 40µA (typical)
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The pin configuration of MIC5309-1.5YD6-TR is as follows:

```

---

| | --| VIN VOUT |-- --| GND EN |-- |___________| ```

• VIN: Input voltage pin
• VOUT: Output voltage pin
• GND: Ground pin
• EN: Enable pin (active high)

Functional Features

The MIC5309-1.5YD6-TR offers the following functional features:

• Low dropout voltage: Ensures efficient power conversion even when the input voltage is close to the output voltage.
• Low quiescent current: Minimizes power consumption during standby or idle conditions.
• Thermal shutdown protection: Safeguards the device from overheating by disabling the output when the temperature exceeds a certain threshold.
• Short-circuit protection: Automatically shuts down the output in case of a short circuit, preventing damage to the regulator and connected devices.

Advantages and Disadvantages

Advantages

• Compact package size allows for easy integration into space-constrained designs.
• Wide input voltage range enables compatibility with various power sources.
• Low dropout voltage ensures efficient power conversion.
• Excellent load and line regulation characteristics provide stable output voltage under varying conditions.

Disadvantages

• Limited maximum output current may not be suitable for high-power applications.
• Requires external components (input/output capacitors) for optimal performance.

Working Principles

MIC5309-1.5YD6-TR operates based on the principle of linear voltage regulation. It utilizes a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The enable pin allows the user to control the device's operation, enabling or disabling the output as needed.

Detailed Application Field Plans

The MIC5309-1.5YD6-TR is commonly used in various electronic devices and systems, including but not limited to:

1. Battery-powered portable devices: Provides stable voltage supply to microcontrollers, sensors, and other low-power components.
2. IoT (Internet of Things) devices: Ensures reliable power delivery to wireless modules, sensors, and communication interfaces.
3. Wearable electronics: Regulates voltage for wearable devices such as smartwatches, fitness trackers, and medical monitoring devices.
4. Consumer electronics: Used in audio/video equipment, gaming consoles, and handheld devices to maintain consistent power levels.
5. Industrial automation: Suitable for powering control systems, motor drivers, and sensor networks in industrial environments.

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to MIC5309-1.5YD6-TR are:

1. LM1117-1.5: A popular voltage regulator with similar specifications and package options.
2. XC6201P152MR: Another low dropout voltage regulator with a compact SOT-23 package.
3. LT1763-1.5: A high-performance linear regulator offering low quiescent current and adjustable output voltage.

These alternative models provide similar functionality and can be chosen based on specific design requirements and availability.

In conclusion, the MIC5309-1.5YD6-TR is a voltage regulator that offers efficient and reliable power supply regulation for various electronic applications. Its compact size, low dropout voltage, and wide input voltage range make it suitable for a range of devices. However, its limited maximum output current and external component requirements should be considered when selecting this product for specific applications.