画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC5321-NDYMT-TR

MIC5321-NDYMT-TR

Introduction

The MIC5321-NDYMT-TR is a voltage regulator belonging to the category of integrated circuits. This device is commonly used in electronic devices to regulate and stabilize voltage levels, ensuring consistent and reliable power supply to sensitive components.

Basic Information Overview

  • Category: Integrated Circuit
  • Use: Voltage Regulation
  • Characteristics: High Efficiency, Low Dropout Voltage
  • Package: DFN-10
  • Essence: Stable Voltage Regulation
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

The MIC5321-NDYMT-TR features the following specifications: - Input Voltage Range: 2.5V to 6.0V - Output Voltage Range: 0.8V to 5.5V - Maximum Output Current: 500mA - Dropout Voltage: 150mV at 300mA - Quiescent Current: 35µA - Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The MIC5321-NDYMT-TR has a DFN-10 package with the following pin configuration: 1. VIN (Input Voltage) 2. EN (Enable) 3. GND (Ground) 4. VOUT (Output Voltage) 5. NC (No Connection) 6. NC (No Connection) 7. NC (No Connection) 8. NC (No Connection) 9. NC (No Connection) 10. PG (Power Good)

Functional Features

  • High Efficiency: The MIC5321-NDYMT-TR offers high efficiency, minimizing power loss during voltage regulation.
  • Low Dropout Voltage: With a low dropout voltage of 150mV at 300mA, this regulator ensures efficient power delivery even when the input voltage is close to the output voltage.

Advantages and Disadvantages

Advantages

  • Compact Size
  • Wide Input Voltage Range
  • Low Quiescent Current

Disadvantages

  • Limited Maximum Output Current
  • Sensitive to Input Voltage Spikes

Working Principles

The MIC5321-NDYMT-TR operates by comparing the output voltage to a reference voltage and adjusting the internal circuitry to maintain a stable output voltage despite variations in the input voltage or load conditions. It utilizes feedback control to achieve precise voltage regulation.

Detailed Application Field Plans

The MIC5321-NDYMT-TR is well-suited for various applications, including: - Battery-Powered Devices - Portable Electronics - IoT Devices - Wearable Technology - Consumer Electronics

Detailed and Complete Alternative Models

Some alternative models to the MIC5321-NDYMT-TR include: - MIC5320: Similar specifications with a different package type - MIC5322: Higher maximum output current with similar characteristics - MIC5330: Adjustable output voltage with comparable efficiency

In conclusion, the MIC5321-NDYMT-TR is a versatile voltage regulator with a wide range of applications, offering high efficiency and stable voltage regulation. While it has certain limitations, its compact size and low quiescent current make it an attractive choice for various electronic devices.

[Word Count: 443]

技術ソリューションにおける MIC5321-NDYMT-TR の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the MIC5321-NDYMT-TR?

    • The MIC5321-NDYMT-TR is a high-performance, low-noise LDO (Low Dropout) voltage regulator designed for use in various technical solutions.
  2. What is the input voltage range of the MIC5321-NDYMT-TR?

    • The input voltage range of the MIC5321-NDYMT-TR is typically 2.5V to 6.0V.
  3. What is the output voltage range of the MIC5321-NDYMT-TR?

    • The output voltage range of the MIC5321-NDYMT-TR is adjustable from 0.8V to 5.5V.
  4. What are the typical applications of the MIC5321-NDYMT-TR?

    • The MIC5321-NDYMT-TR is commonly used in battery-powered devices, portable equipment, and other applications requiring a regulated power supply.
  5. What is the maximum output current of the MIC5321-NDYMT-TR?

    • The maximum output current of the MIC5321-NDYMT-TR is typically 500mA.
  6. What are the key features of the MIC5321-NDYMT-TR?

    • The key features of the MIC5321-NDYMT-TR include low dropout voltage, low quiescent current, thermal shutdown protection, and current limit protection.
  7. What is the thermal resistance of the MIC5321-NDYMT-TR?

    • The thermal resistance of the MIC5321-NDYMT-TR is typically 120°C/W.
  8. Is the MIC5321-NDYMT-TR suitable for automotive applications?

    • Yes, the MIC5321-NDYMT-TR is suitable for automotive applications, as it meets the AEC-Q100 automotive qualification standards.
  9. Does the MIC5321-NDYMT-TR require external components for operation?

    • Yes, the MIC5321-NDYMT-TR requires external input and output capacitors for stable operation.
  10. What is the operating temperature range of the MIC5321-NDYMT-TR?

    • The operating temperature range of the MIC5321-NDYMT-TR is typically -40°C to 125°C.