画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC5374-MG44YMT-TR

MIC5374-MG44YMT-TR

Product Overview

Category

MIC5374-MG44YMT-TR belongs to the category of voltage regulators.

Use

This product is commonly used for voltage regulation in various electronic devices and systems.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and thermal protection

Package

MIC5374-MG44YMT-TR comes in a small outline package (SOT-23-5) which is suitable for surface mount applications.

Essence

The essence of MIC5374-MG44YMT-TR lies in its ability to provide stable and regulated voltage output, ensuring proper functioning of electronic circuits.

Packaging/Quantity

This product is typically packaged in reels or tape and reel format, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.6V
  • Dropout Voltage: 200mV at 150mA load
  • Quiescent Current: 45µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

MIC5374-MG44YMT-TR has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Low quiescent current consumption
  • Fast transient response
  • Built-in overcurrent and thermal protection
  • Adjustable output voltage through external resistors
  • Enable pin for power management control

Advantages

  • High efficiency results in reduced power dissipation
  • Wide input voltage range allows compatibility with various power sources
  • Adjustable output voltage provides flexibility for different applications
  • Overcurrent and thermal protection ensure device safety

Disadvantages

  • Limited output voltage range may not be suitable for certain applications requiring higher voltages
  • SOT-23-5 package may have size limitations in some designs

Working Principles

MIC5374-MG44YMT-TR utilizes a feedback mechanism to regulate the output voltage. The enable pin allows for power management control, enabling the device to be turned on or off as needed. The built-in overcurrent and thermal protection mechanisms safeguard the device and connected circuitry from damage.

Detailed Application Field Plans

MIC5374-MG44YMT-TR finds application in various electronic devices and systems, including but not limited to: - Mobile phones - Tablets - Portable media players - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to MIC5374-MG44YMT-TR include: - LM1117-3.3 - LT1763-3.3 - TPS73633

These models offer similar functionality and characteristics, providing options for different design requirements.

In conclusion, MIC5374-MG44YMT-TR is a voltage regulator with high efficiency, adjustable output voltage, and built-in protection features. It is commonly used in various electronic devices and systems. Alternative models such as LM1117-3.3, LT1763-3.3, and TPS73633 can also be considered for similar applications.

技術ソリューションにおける MIC5374-MG44YMT-TR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC5374-MG44YMT-TR in technical solutions:

  1. Q: What is the MIC5374-MG44YMT-TR? A: The MIC5374-MG44YMT-TR is a voltage regulator IC (integrated circuit) that provides a regulated output voltage for various electronic devices.

  2. Q: What is the input voltage range of the MIC5374-MG44YMT-TR? A: The input voltage range of the MIC5374-MG44YMT-TR is typically between 2.7V and 5.5V.

  3. Q: What is the output voltage range of the MIC5374-MG44YMT-TR? A: The output voltage range of the MIC5374-MG44YMT-TR can be adjusted from 0.8V to 3.6V using external resistors.

  4. Q: What is the maximum output current of the MIC5374-MG44YMT-TR? A: The MIC5374-MG44YMT-TR can provide a maximum output current of up to 1.5A.

  5. Q: What is the efficiency of the MIC5374-MG44YMT-TR? A: The efficiency of the MIC5374-MG44YMT-TR depends on the input and output voltage levels, as well as the load conditions. It typically has high efficiency levels.

  6. Q: Can the MIC5374-MG44YMT-TR operate in a wide temperature range? A: Yes, the MIC5374-MG44YMT-TR is designed to operate in a wide temperature range, typically from -40°C to +125°C.

  7. Q: Does the MIC5374-MG44YMT-TR have built-in protection features? A: Yes, the MIC5374-MG44YMT-TR includes various protection features such as thermal shutdown, current limit, and short-circuit protection.

  8. Q: What type of package does the MIC5374-MG44YMT-TR come in? A: The MIC5374-MG44YMT-TR is available in a 4x4mm MLF (Micro Lead Frame) package.

  9. Q: Can the MIC5374-MG44YMT-TR be used in battery-powered applications? A: Yes, the MIC5374-MG44YMT-TR is suitable for battery-powered applications due to its low quiescent current and high efficiency.

  10. Q: Are there any application notes or reference designs available for the MIC5374-MG44YMT-TR? A: Yes, the manufacturer provides application notes and reference designs that can help with the implementation of the MIC5374-MG44YMT-TR in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.