Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC5393-SGYMT-T5
詳細を表示 DataSheets

MIC5393-SGYMT-T5

Product Overview

Category

MIC5393-SGYMT-T5 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation and power management capabilities
  • Compact size
  • High efficiency
  • Low power consumption

Package

MIC5393-SGYMT-T5 is available in a small form factor package, which makes it suitable for space-constrained applications.

Essence

The essence of this product lies in its ability to regulate voltage and manage power efficiently, ensuring stable and reliable operation of electronic devices.

Packaging/Quantity

MIC5393-SGYMT-T5 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V - 5.5V
  • Output Voltage Range: 0.8V - 3.6V
  • Maximum Output Current: 500mA
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 95%
  • Quiescent Current: 20µA (typical)

Pin Configuration

MIC5393-SGYMT-T5 features the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range allows compatibility with various power sources.
  • High efficiency ensures minimal power loss during voltage regulation.
  • Enable pin provides control over the device's operation.
  • Feedback pin enables accurate voltage regulation.
  • Output voltage pin delivers regulated voltage to the load.

Advantages and Disadvantages

Advantages

  • Compact size makes it suitable for space-constrained applications.
  • High efficiency results in minimal power loss.
  • Wide input voltage range provides versatility.
  • Enable pin allows for easy control of the device.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Operating temperature range may restrict usage in extreme environments.

Working Principles

MIC5393-SGYMT-T5 operates based on a switching regulator topology. It utilizes an internal control loop to maintain the desired output voltage by adjusting the duty cycle of the internal switch. This ensures efficient voltage regulation and power management.

Detailed Application Field Plans

MIC5393-SGYMT-T5 finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC5393-SGYMT-T5 include: - LT1763 - TPS62130 - AP2112

These models can be considered as alternatives depending on specific requirements and design constraints.

Word count: 314 words

技術ソリューションにおける MIC5393-SGYMT-T5 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC5393-SGYMT-T5 in technical solutions:

  1. Q: What is the operating voltage range of MIC5393-SGYMT-T5? A: The operating voltage range of MIC5393-SGYMT-T5 is typically between 2.7V and 5.5V.

  2. Q: What is the maximum output current of MIC5393-SGYMT-T5? A: MIC5393-SGYMT-T5 can provide a maximum output current of 150mA.

  3. Q: Can MIC5393-SGYMT-T5 be used for low-power applications? A: Yes, MIC5393-SGYMT-T5 is suitable for low-power applications due to its low quiescent current consumption.

  4. Q: Does MIC5393-SGYMT-T5 have built-in thermal shutdown protection? A: Yes, MIC5393-SGYMT-T5 features built-in thermal shutdown protection to prevent overheating.

  5. Q: Is MIC5393-SGYMT-T5 compatible with both analog and digital loads? A: Yes, MIC5393-SGYMT-T5 is designed to work with both analog and digital loads.

  6. Q: Can MIC5393-SGYMT-T5 operate in a wide temperature range? A: Yes, MIC5393-SGYMT-T5 has an extended temperature range of -40°C to +125°C.

  7. Q: Does MIC5393-SGYMT-T5 require any external components for operation? A: MIC5393-SGYMT-T5 requires only a few external components such as input/output capacitors and resistors for proper operation.

  8. Q: Can MIC5393-SGYMT-T5 be used in battery-powered applications? A: Yes, MIC5393-SGYMT-T5 is suitable for battery-powered applications due to its low dropout voltage.

  9. Q: What is the typical output voltage accuracy of MIC5393-SGYMT-T5? A: The typical output voltage accuracy of MIC5393-SGYMT-T5 is ±2%.

  10. Q: Is MIC5393-SGYMT-T5 available in a small package size? A: Yes, MIC5393-SGYMT-T5 is available in a compact SOT-23 package, making it suitable for space-constrained applications.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.