Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC5504-3.0YMT-TZ
詳細を表示 DataSheets

MIC5504-3.0YMT-TZ

Product Overview

Category

The MIC5504-3.0YMT-TZ belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation: The MIC5504-3.0YMT-TZ provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: The regulator consumes minimal current when in standby mode.
  • Thermal shutdown protection: It has built-in protection against excessive heat.

Package

The MIC5504-3.0YMT-TZ comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to maintain a constant output voltage despite variations in the input voltage or load conditions.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Output voltage: 3.0V
  • Input voltage range: 2.5V to 6.0V
  • Dropout voltage: 150mV at 100mA
  • Quiescent current: 35µA (typical)
  • Operating temperature range: -40°C to +125°C

Detailed Pin Configuration

The MIC5504-3.0YMT-TZ has the following pin configuration:

  1. VIN (Input voltage)
  2. GND (Ground)
  3. VOUT (Output voltage)

Functional Features

  • Voltage regulation: The MIC5504-3.0YMT-TZ maintains a stable output voltage of 3.0V regardless of changes in the input voltage or load conditions.
  • Low dropout voltage: It can operate efficiently even when the input voltage is only slightly higher than the desired output voltage.
  • Low quiescent current: The regulator consumes minimal current when in standby mode, resulting in improved energy efficiency.
  • Thermal shutdown protection: It includes a built-in thermal shutdown feature that protects the device from overheating.

Advantages and Disadvantages

Advantages

  • Stable output voltage ensures reliable performance of connected electronic components.
  • Low dropout voltage allows for efficient operation even with low input voltages.
  • Low quiescent current minimizes power consumption during standby mode.
  • Thermal shutdown protection prevents damage due to excessive heat.

Disadvantages

  • Limited input voltage range (2.5V to 6.0V) may not be suitable for all applications.
  • Higher cost compared to non-regulated voltage sources.

Working Principles

The MIC5504-3.0YMT-TZ operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. This is achieved by varying the resistance within the regulator to compensate for changes in the input voltage or load conditions.

Detailed Application Field Plans

The MIC5504-3.0YMT-TZ finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial automation equipment - Automotive electronics - Medical devices

Detailed and Complete Alternative Models

  1. MIC5504-2.8YMT-TZ: Similar to MIC5504-3.0YMT-TZ, but with an output voltage of 2.8V.
  2. MIC5504-3.3YMT-TZ: Similar to MIC5504-3.0YMT-TZ, but with an output voltage of 3.3V.
  3. MIC5504-5.0YMT-TZ: Similar to MIC5504-3.0YMT-TZ, but with an output voltage of 5.0V.

These alternative models provide different output voltage options to suit specific application requirements.

(Note: The word count for this response is 431 words)

技術ソリューションにおける MIC5504-3.0YMT-TZ の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC5504-3.0YMT-TZ in technical solutions:

  1. Q: What is the MIC5504-3.0YMT-TZ? A: The MIC5504-3.0YMT-TZ is a voltage regulator IC (integrated circuit) that provides a fixed output voltage of 3.0V.

  2. Q: What is the input voltage range for the MIC5504-3.0YMT-TZ? A: The input voltage range for the MIC5504-3.0YMT-TZ is typically between 2.7V and 5.5V.

  3. Q: What is the maximum output current of the MIC5504-3.0YMT-TZ? A: The MIC5504-3.0YMT-TZ can provide a maximum output current of 150mA.

  4. Q: Can the MIC5504-3.0YMT-TZ be used in battery-powered applications? A: Yes, the MIC5504-3.0YMT-TZ is suitable for battery-powered applications due to its low quiescent current and wide input voltage range.

  5. Q: Does the MIC5504-3.0YMT-TZ require any external components for operation? A: Yes, the MIC5504-3.0YMT-TZ requires an input capacitor and an output capacitor for stability and proper operation.

  6. Q: Is the MIC5504-3.0YMT-TZ a linear or switching regulator? A: The MIC5504-3.0YMT-TZ is a linear regulator, which means it regulates the output voltage by dissipating excess power as heat.

  7. Q: What is the dropout voltage of the MIC5504-3.0YMT-TZ? A: The dropout voltage of the MIC5504-3.0YMT-TZ is typically around 200mV at a 150mA load.

  8. Q: Can the MIC5504-3.0YMT-TZ handle input voltage fluctuations? A: Yes, the MIC5504-3.0YMT-TZ has built-in protection features to handle input voltage fluctuations and provide a stable output voltage.

  9. Q: Is the MIC5504-3.0YMT-TZ available in different package options? A: Yes, the MIC5504-3.0YMT-TZ is available in various package options, such as SOT-23 and DFN, to suit different application requirements.

  10. Q: What are some typical applications for the MIC5504-3.0YMT-TZ? A: The MIC5504-3.0YMT-TZ can be used in a wide range of applications, including battery-powered devices, portable electronics, IoT devices, and industrial equipment that require a stable 3.0V power supply.