Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC5528-3.3YMT-T5
詳細を表示 DataSheets

MIC5528-3.3YMT-T5

Product Overview

Category

MIC5528-3.3YMT-T5 belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact package size
  • Low power consumption
  • Wide input voltage range
  • High efficiency

Package

MIC5528-3.3YMT-T5 is available in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring proper functioning of electronic devices.

Packaging/Quantity

MIC5528-3.3YMT-T5 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 16V
  • Output Voltage: 3.3V
  • Output Current: Up to 500mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 120µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

MIC5528-3.3YMT-T5 has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Low quiescent current
  • Fast transient response

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows compatibility with various power sources.
  • Low dropout voltage ensures efficient power conversion.
  • Overcurrent and short-circuit protection enhance device safety.
  • Fast transient response enables stable voltage output during load changes.

Disadvantages

  • Limited output current capacity may restrict usage in high-power applications.
  • Higher cost compared to non-regulated voltage sources.

Working Principles

MIC5528-3.3YMT-T5 operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, regardless of input voltage variations or load changes. This regulation is achieved through the use of a voltage reference, error amplifier, and pass transistor.

Detailed Application Field Plans

MIC5528-3.3YMT-T5 finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial automation equipment - Automotive electronics - IoT devices

Detailed and Complete Alternative Models

  1. MIC5205-3.3YM5-TR: Similar voltage regulator with lower dropout voltage.
  2. LT1763CS8-3.3#PBF: Voltage regulator with higher output current capability.
  3. LM1117IMPX-3.3/NOPB: Low dropout voltage regulator with adjustable output voltage.

These alternative models offer similar functionality and can be considered as substitutes for MIC5528-3.3YMT-T5 depending on specific requirements.

Word count: 422

技術ソリューションにおける MIC5528-3.3YMT-T5 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC5528-3.3YMT-T5 in technical solutions:

  1. Q: What is the MIC5528-3.3YMT-T5? A: The MIC5528-3.3YMT-T5 is a voltage regulator IC (integrated circuit) that provides a regulated output voltage of 3.3V.

  2. Q: What are the typical applications of MIC5528-3.3YMT-T5? A: It is commonly used in various electronic devices and systems that require a stable 3.3V power supply, such as microcontrollers, sensors, and communication modules.

  3. Q: What is the input voltage range for MIC5528-3.3YMT-T5? A: The input voltage range for this voltage regulator is typically between 4.5V and 16V.

  4. Q: What is the maximum output current of MIC5528-3.3YMT-T5? A: The maximum output current is 150mA, which means it can provide up to 150mA of current at the regulated 3.3V output.

  5. Q: Does MIC5528-3.3YMT-T5 have built-in protection features? A: Yes, it has built-in protection features like thermal shutdown, overcurrent protection, and short-circuit protection to ensure safe operation.

  6. Q: Can I use MIC5528-3.3YMT-T5 in battery-powered applications? A: Yes, it can be used in battery-powered applications as long as the input voltage remains within the specified range.

  7. Q: Is there any external component required for MIC5528-3.3YMT-T5? A: Yes, it requires a few external components like input and output capacitors for stability and filtering.

  8. Q: What is the operating temperature range of MIC5528-3.3YMT-T5? A: The operating temperature range is typically between -40°C to +125°C, making it suitable for a wide range of environments.

  9. Q: Can I use MIC5528-3.3YMT-T5 in automotive applications? A: Yes, it is designed to meet automotive-grade requirements and can be used in automotive applications.

  10. Q: Is there a datasheet available for MIC5528-3.3YMT-T5? A: Yes, you can find the detailed specifications and application information in the datasheet provided by the manufacturer.