PIC16C54A-10I/P

Product Overview

The PIC16C54A-10I/P belongs to the category of microcontrollers and is widely used in various electronic applications. This microcontroller is known for its compact size, low power consumption, and versatile functionality. The PIC16C54A-10I/P is available in a 18-pin PDIP package and is an essential component in many electronic devices.

Basic Information

• Category: Microcontroller
• Use: Embedded control applications
• Characteristics: Compact size, low power consumption
• Package: 18-pin PDIP
• Essence: Versatile functionality
• Packaging/Quantity: Available in bulk quantities

Specifications

The PIC16C54A-10I/P features a 8-bit CPU core, 512 bytes of program memory, 25 bytes of data memory, and 12 I/O pins. It operates at a maximum frequency of 10 MHz and supports various communication protocols.

Detailed Pin Configuration

The detailed pin configuration of the PIC16C54A-10I/P is as follows: 1. VDD - Power supply 2. VSS - Ground 3. RA0 - I/O pin 4. RA1 - I/O pin 5. RA2 - I/O pin 6. RA3 - I/O pin 7. RA4 - I/O pin 8. MCLR - Master clear/reset 9. RB0 - I/O pin 10. RB1 - I/O pin 11. RB2 - I/O pin 12. RB3 - I/O pin 13. RB4 - I/O pin 14. RB5 - I/O pin 15. RB6 - I/O pin 16. RB7 - I/O pin 17. OSC1 - Oscillator input 18. OSC2 - Oscillator output

Functional Features

The PIC16C54A-10I/P offers a wide range of functional features including: - Timer modules - Analog-to-digital converter - Serial communication interface - Interrupt handling capabilities - Low-power modes for energy efficiency

Advantages and Disadvantages

Advantages

• Compact size
• Low power consumption
• Versatile functionality
• Wide operating voltage range
• Cost-effective solution for embedded control applications

Disadvantages

• Limited program memory
• Limited data memory
• Lower processing speed compared to higher-end microcontrollers

Working Principles

The PIC16C54A-10I/P operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its program memory and interacts with external components through its I/O pins. The microcontroller's internal peripherals and modules enable it to perform various tasks according to the programmed instructions.

Detailed Application Field Plans

The PIC16C54A-10I/P is commonly used in the following application fields: - Consumer electronics - Industrial automation - Automotive systems - Medical devices - Home appliances

Detailed and Complete Alternative Models

Some alternative models to the PIC16C54A-10I/P include: - PIC16F54 - PIC16C55 - PIC16F57 - ATtiny85 - MSP430G2231

In conclusion, the PIC16C54A-10I/P microcontroller offers a balance of performance, size, and cost, making it suitable for a wide range of embedded control applications.

Word count: 443