Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
PIC16C63A-04I/SS
詳細を表示 DataSheets

PIC16C63A-04I/SS

Product Overview

Category

The PIC16C63A-04I/SS belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • Low power consumption
  • High performance
  • Small form factor
  • Wide operating voltage range
  • Integrated peripherals for enhanced functionality

Package

The PIC16C63A-04I/SS is available in a SSOP package, which stands for Shrink Small Outline Package. This package offers a compact size and easy integration into circuit boards.

Essence

The essence of the PIC16C63A-04I/SS lies in its ability to provide efficient control and processing capabilities in a small and power-efficient package.

Packaging/Quantity

The PIC16C63A-04I/SS is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of microcontrollers.

Specifications

  • Microcontroller type: 8-bit
  • Clock speed: 4 MHz
  • Program memory: 7 KB
  • RAM: 192 bytes
  • I/O pins: 22
  • Timers: 2
  • ADC channels: 5
  • Communication interfaces: UART, SPI, I2C

Detailed Pin Configuration

The PIC16C63A-04I/SS has a total of 28 pins. The pin configuration is as follows:

  1. VDD - Power supply
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. MCLR - Master Clear input
  9. VSS - Ground
  10. RB0 - General-purpose I/O pin
  11. RB1 - General-purpose I/O pin
  12. RB2 - General-purpose I/O pin
  13. RB3 - General-purpose I/O pin
  14. RB4 - General-purpose I/O pin
  15. RB5 - General-purpose I/O pin
  16. RB6 - General-purpose I/O pin
  17. RB7 - General-purpose I/O pin
  18. RC0 - General-purpose I/O pin
  19. RC1 - General-purpose I/O pin
  20. RC2 - General-purpose I/O pin
  21. RC3 - General-purpose I/O pin
  22. RC4 - General-purpose I/O pin
  23. RC5 - General-purpose I/O pin
  24. RC6 - General-purpose I/O pin
  25. RC7 - General-purpose I/O pin
  26. OSC1 - Oscillator input
  27. OSC2 - Oscillator output
  28. VSS - Ground

Functional Features

  • High-speed processing capabilities
  • On-chip peripherals for enhanced functionality
  • Low power consumption for extended battery life
  • Flexible I/O pins for versatile connectivity options
  • Built-in timers and ADC channels for precise timing and analog signal processing

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it suitable for portable devices
  • Integrated peripherals reduce the need for external components
  • Wide operating voltage range allows for compatibility with various power sources
  • Cost-effective solution for many applications

Disadvantages

  • Limited program memory and RAM compared to higher-end microcontrollers
  • Relatively lower clock speed may limit performance in certain applications
  • Lack of advanced features found in more advanced microcontrollers

Working Principles

The PIC16C63A-04I/SS operates based on the Von Neumann architecture, where program instructions and data are stored in the same memory space. It executes instructions fetched from program memory sequentially, performing various operations based on the instructions and input/output signals.

Detailed Application Field Plans

The PIC16C63A-04I/SS finds applications in a wide range of fields, including but not limited to: - Home automation systems - Industrial control systems - Automotive electronics - Medical devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the PIC16C63A-04I/SS include: - PIC16F628A - PIC16F877A - ATmega328P - STM32F103C8T6 - MSP430G2553

These alternative models provide comparable features and can be used as substitutes depending on specific requirements and compatibility considerations.

Word count: 550 words

技術ソリューションにおける PIC16C63A-04I/SS の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum operating frequency of PIC16C63A-04I/SS?
    - The maximum operating frequency of PIC16C63A-04I/SS is 4 MHz.

  2. What are the key features of PIC16C63A-04I/SS?
    - The key features of PIC16C63A-04I/SS include 7-channel 8-bit Analog-to-Digital Converter (ADC), 192 bytes of RAM, and 22 I/O pins.

  3. Can PIC16C63A-04I/SS be used in battery-powered applications?
    - Yes, PIC16C63A-04I/SS can be used in battery-powered applications due to its low power consumption.

  4. Is PIC16C63A-04I/SS suitable for motor control applications?
    - Yes, PIC16C63A-04I/SS can be used for simple motor control applications.

  5. What programming language is commonly used for PIC16C63A-04I/SS?
    - Assembly language or C language is commonly used for programming PIC16C63A-04I/SS.

  6. Can PIC16C63A-04I/SS communicate with other devices using serial communication protocols?
    - Yes, PIC16C63A-04I/SS supports serial communication protocols such as SPI and I2C.

  7. What is the typical voltage supply range for PIC16C63A-04I/SS?
    - The typical voltage supply range for PIC16C63A-04I/SS is 2.0V to 5.5V.

  8. Does PIC16C63A-04I/SS have built-in timers for timing applications?
    - Yes, PIC16C63A-04I/SS has built-in timers which can be used for various timing applications.

  9. Can PIC16C63A-04I/SS be used in temperature sensing and control systems?
    - Yes, PIC16C63A-04I/SS can be used in temperature sensing and control systems with external temperature sensors.

  10. Is PIC16C63A-04I/SS suitable for embedded control applications in consumer electronics?
    - Yes, PIC16C63A-04I/SS is suitable for embedded control applications in consumer electronics due to its versatile features and low cost.