Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
PIC16F1827-I/ML
詳細を表示 DataSheets

PIC16F1827-I/ML

Introduction

The PIC16F1827-I/ML is a microcontroller belonging to the PIC16 family of microcontrollers produced by Microchip Technology. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded control applications
  • Characteristics: Low power consumption, high performance, versatile peripherals
  • Package: 28-pin QFN (Quad Flat No-Lead)
  • Essence: Integrated microcontroller with flash memory
  • Packaging/Quantity: Tape & Reel, 98 units per reel

Specifications

  • CPU Speed: 32 MHz
  • Program Memory Size: 14 KB
  • RAM Size: 368 bytes
  • Digital I/O Pins: 25
  • Analog Input Channels: 12
  • Communication Interfaces: SPI, I2C, UART
  • Operating Voltage Range: 1.8V to 5.5V
  • Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The PIC16F1827-I/ML features a 28-pin QFN package with specific pin assignments for power, ground, I/O, communication interfaces, and other functionalities. The detailed pin configuration can be found in the product datasheet provided by Microchip Technology.

Functional Features

  • Versatile Peripherals: The microcontroller offers a wide range of peripherals including timers, PWM modules, ADC, and comparators, making it suitable for diverse embedded control applications.
  • Low Power Consumption: With its low-power modes and efficient architecture, the PIC16F1827-I/ML is suitable for battery-powered applications.
  • Enhanced Communication Interfaces: The integrated SPI, I2C, and UART interfaces enable seamless communication with external devices.

Advantages and Disadvantages

Advantages

  • High performance at low power
  • Versatile peripheral set
  • Wide operating voltage range

Disadvantages

  • Limited RAM size
  • Restricted program memory size

Working Principles

The PIC16F1827-I/ML operates based on the Harvard architecture, featuring separate program and data memories. It executes instructions fetched from program memory and interacts with peripherals and I/O devices to perform specific tasks as programmed by the user.

Detailed Application Field Plans

The PIC16F1827-I/ML is well-suited for various embedded control applications, including but not limited to: - Home automation systems - Industrial control systems - Sensor interfacing and data acquisition - Consumer electronics

Detailed and Complete Alternative Models

  • PIC16F1826-I/ML
  • PIC16F1828-I/ML
  • PIC16F1829-I/ML

These alternative models offer similar functionality and are compatible with the same development tools and software ecosystem, providing flexibility in choosing the most suitable microcontroller for a given application.

In conclusion, the PIC16F1827-I/ML microcontroller from Microchip Technology offers a balance of performance, power efficiency, and versatile peripherals, making it a suitable choice for a wide range of embedded control applications.

Word count: 443

技術ソリューションにおける PIC16F1827-I/ML の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum operating frequency of PIC16F1827-I/ML?
    - The maximum operating frequency of PIC16F1827-I/ML is 32 MHz.

  2. Can PIC16F1827-I/ML be used for motor control applications?
    - Yes, PIC16F1827-I/ML can be used for motor control applications with its integrated PWM modules.

  3. Does PIC16F1827-I/ML support analog-to-digital conversion?
    - Yes, PIC16F1827-I/ML features a 10-bit ADC module for analog-to-digital conversion.

  4. What communication interfaces are supported by PIC16F1827-I/ML?
    - PIC16F1827-I/ML supports SPI, I2C, and UART communication interfaces.

  5. Is PIC16F1827-I/ML suitable for battery-powered applications?
    - Yes, PIC16F1827-I/ML is suitable for battery-powered applications due to its low power consumption features.

  6. Can PIC16F1827-I/ML be programmed using C language?
    - Yes, PIC16F1827-I/ML can be programmed using C language with the appropriate compiler.

  7. What is the maximum number of I/O pins available in PIC16F1827-I/ML?
    - PIC16F1827-I/ML provides 28 I/O pins for versatile connectivity.

  8. Does PIC16F1827-I/ML have built-in timers?
    - Yes, PIC16F1827-I/ML includes multiple timer modules for various timing applications.

  9. Can PIC16F1827-I/ML operate in harsh industrial environments?
    - Yes, PIC16F1827-I/ML is designed to operate reliably in harsh industrial environments with its robust features.

  10. Is PIC16F1827-I/ML RoHS compliant?
    - Yes, PIC16F1827-I/ML is RoHS compliant, making it suitable for environmentally conscious designs.