PIC16LC76-04I/SP

Product Overview

Category

The PIC16LC76-04I/SP belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

• Low power consumption
• High performance
• Compact size
• Versatile functionality

Package

The PIC16LC76-04I/SP is available in a 28-pin plastic dual inline package (DIP).

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a compact form factor.

Packaging/Quantity

The PIC16LC76-04I/SP is typically packaged in reels or tubes, with a quantity of 25 units per package.

Specifications

• Architecture: 8-bit
• CPU Speed: 4 MHz
• Program Memory Size: 14 KB
• RAM Size: 368 bytes
• Number of I/O Pins: 22
• Operating Voltage Range: 2.5V - 5.5V
• Temperature Range: -40°C to +85°C

Detailed Pin Configuration

1. VDD - Power supply voltage
2. RA0 - General-purpose I/O pin
3. RA1 - General-purpose I/O pin
4. RA2 - General-purpose I/O pin
5. RA3 - General-purpose I/O pin
6. RA4 - General-purpose I/O pin
7. RA5 - General-purpose I/O pin
8. VSS - Ground
9. RB0 - General-purpose I/O pin
10. RB1 - General-purpose I/O pin
11. RB2 - General-purpose I/O pin
12. RB3 - General-purpose I/O pin
13. RB4 - General-purpose I/O pin
14. RB5 - General-purpose I/O pin
15. RB6 - General-purpose I/O pin
16. RB7 - General-purpose I/O pin
17. OSC1/CLKIN - Oscillator input
18. OSC2/CLKOUT - Oscillator output
19. MCLR/VPP - Master Clear/Voltage Programming Pin
20. VDD - Power supply voltage
21. VSS - Ground
22. RC0 - General-purpose I/O pin
23. RC1 - General-purpose I/O pin
24. RC2 - General-purpose I/O pin
25. RC3 - General-purpose I/O pin
26. RC4 - General-purpose I/O pin
27. RC5 - General-purpose I/O pin
28. RC6/TX/CK - General-purpose I/O pin

Functional Features

• 8-bit RISC architecture for efficient processing
• Flash program memory for easy reprogramming
• EEPROM data memory for non-volatile storage
• Timer modules for precise timing operations
• Analog-to-digital converter (ADC) for analog signal processing
• Serial communication interfaces (USART, SPI, I2C) for data exchange
• Interrupt capability for event-driven programming
• Low power modes for energy efficiency

Advantages and Disadvantages

Advantages

• Compact size allows for integration in space-constrained designs
• Low power consumption extends battery life in portable applications
• Versatile functionality enables a wide range of applications
• Easy reprogramming with flash memory simplifies development and updates

Disadvantages

• Limited program memory size may restrict complex applications
• Relatively low CPU speed may impact real-time processing requirements

Working Principles

The PIC16LC76-04I/SP operates based on the principles of microcontroller architecture. It executes instructions stored in its program memory to perform various tasks. The CPU fetches instructions, decodes them, and executes the corresponding operations. Input/output pins allow communication with external devices, while timers and interrupts enable precise timing and event-driven programming.

Detailed Application Field Plans

The PIC16LC76-04I/SP finds applications in various fields, including but not limited to: 1. Industrial automation 2. Consumer electronics 3. Automotive systems 4. Medical devices 5. Home appliances 6. Internet of Things (IoT) devices

Detailed and Complete Alternative Models

1. PIC16F877A: Similar features with enhanced program memory and I/O capabilities.
2. PIC18F4520: Higher performance with 16-bit instruction set and larger memory capacity.
3. ATmega328P: Microcontroller from a different manufacturer with comparable features and popularity.

These alternative models offer similar functionalities and can be considered as substitutes for the PIC16LC76-04I/SP depending on specific requirements.

In conclusion, the PIC16LC76-04I/SP is a versatile microcontroller that combines low power consumption, high performance, and compact size. Its numerous functional features make it suitable for a wide range of