画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
PIC16LCE625T-04E/SS

PIC16LCE625T-04E/SS

Product Overview

Category

The PIC16LCE625T-04E/SS belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • Low power consumption
  • High performance
  • Small form factor
  • Wide operating voltage range
  • Integrated peripherals for enhanced functionality

Package

The PIC16LCE625T-04E/SS is available in a SSOP package, which stands for Shrink Small Outline Package. This package offers a compact size and easy integration into circuit boards.

Essence

The essence of the PIC16LCE625T-04E/SS lies in its ability to provide efficient control and processing capabilities in a small and low-power package.

Packaging/Quantity

The PIC16LCE625T-04E/SS is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Microcontroller architecture: 8-bit
  • Clock speed: 4 MHz
  • Flash memory: 2 KB
  • RAM: 128 bytes
  • Operating voltage: 2.0V to 5.5V
  • Number of I/O pins: 20
  • Timers: 1 x 8-bit, 1 x 16-bit
  • Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution
  • Communication interfaces: USART, SPI, I2C

Detailed Pin Configuration

The PIC16LCE625T-04E/SS has a total of 20 pins, each serving a specific function. The pin configuration is as follows:

  1. VDD - Power supply
  2. RA0 - General-purpose I/O
  3. RA1 - General-purpose I/O
  4. RA2 - General-purpose I/O
  5. RA3 - General-purpose I/O
  6. RA4 - General-purpose I/O
  7. RA5 - General-purpose I/O
  8. VSS - Ground
  9. OSC1/CLKIN - Oscillator input
  10. OSC2/CLKOUT - Oscillator output
  11. RC0 - General-purpose I/O
  12. RC1 - General-purpose I/O
  13. RC2 - General-purpose I/O
  14. RC3 - General-purpose I/O
  15. RC4 - General-purpose I/O
  16. RC5 - General-purpose I/O
  17. RC6/TX/CK - USART/SPI/I2C interface
  18. RC7/RX/DT - USART/SPI/I2C interface
  19. MCLR/VPP - Master Clear/Voltage Programming Pin
  20. VDD - Power supply

Functional Features

The PIC16LCE625T-04E/SS offers the following functional features:

  • High-speed processing capabilities
  • Low power consumption for energy-efficient operation
  • Integrated peripherals for enhanced functionality
  • Flexible communication interfaces for seamless connectivity
  • Analog-to-Digital Converter (ADC) for precise analog signal measurements
  • Timers for accurate timing and event management

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it suitable for portable and battery-powered devices.
  • Wide operating voltage range allows for compatibility with various power sources.
  • Integrated peripherals reduce the need for external components, saving cost and board space.
  • High-performance architecture enables efficient data processing.

Disadvantages

  • Limited memory capacity compared to higher-end microcontrollers.
  • Relatively fewer I/O pins restricts the number of external devices that can be connected directly.

Working Principles

The PIC16LCE625T-04E/SS operates based on the principles of microcontroller architecture. It executes instructions stored in its flash memory, processes data, and controls various peripherals and I/O devices according to the program logic.

Detailed Application Field Plans

The PIC16LCE625T-04E/SS finds applications in a wide range of fields, including but not limited to:

  1. Consumer electronics: Remote controls, smart home devices, wearable gadgets.
  2. Industrial automation: Control systems, monitoring devices, sensor networks.
  3. Automotive: Engine control units, dashboard displays, lighting systems.
  4. Medical devices: Patient monitoring, diagnostic equipment, portable medical instruments.
  5. Internet of Things (IoT): Connected devices, smart sensors, home automation.

Detailed and Complete Alternative Models

  1. PIC16F628A-SS: Similar features and pin configuration, with additional EEPROM memory.
  2. PIC16F877A-SS: Higher performance and more I/O pins, suitable for complex applications.
  3. PIC18F4520-SS: 8-bit microcontroller with larger memory capacity and advanced peripherals.
  4. PIC24FJ64GA002-SS:

技術ソリューションにおける PIC16LCE625T-04E/SS の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the operating voltage range of PIC16LCE625T-04E/SS?
    - The operating voltage range is 2.5V to 5.5V.

  2. What are the key features of PIC16LCE625T-04E/SS?
    - Some key features include low power consumption, 8-bit microcontroller, and a wide operating voltage range.

  3. Can PIC16LCE625T-04E/SS be used in battery-powered applications?
    - Yes, it is suitable for battery-powered applications due to its low power consumption.

  4. What communication interfaces does PIC16LCE625T-04E/SS support?
    - It supports SPI, I2C, and UART communication interfaces.

  5. Is PIC16LCE625T-04E/SS suitable for temperature-sensitive applications?
    - Yes, it has a wide operating temperature range and can be used in temperature-sensitive applications.

  6. What development tools are available for programming PIC16LCE625T-04E/SS?
    - Development tools such as MPLAB X IDE and PICkit programmers can be used for programming.

  7. Can PIC16LCE625T-04E/SS be used in automotive applications?
    - Yes, it is suitable for automotive applications due to its wide operating voltage range and temperature range.

  8. What is the maximum clock frequency supported by PIC16LCE625T-04E/SS?
    - The maximum clock frequency is 32 MHz.

  9. Does PIC16LCE625T-04E/SS have built-in analog-to-digital converters (ADC)?
    - Yes, it has a 10-bit ADC module.

  10. Are there any application notes or reference designs available for PIC16LCE625T-04E/SS?
    - Yes, Microchip provides application notes and reference designs to assist in implementing PIC16LCE625T-04E/SS in technical solutions.