Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
PIC16LF722A-E/SP
詳細を表示 DataSheets

PIC16LF722A-E/SP

Introduction

The PIC16LF722A-E/SP is a microcontroller belonging to the PIC16F family of microcontrollers produced by Microchip Technology. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded control applications
  • Characteristics: Low-power consumption, high performance
  • Package: 20-pin DIP (Dual Inline Package)
  • Essence: 8-bit CMOS microcontroller
  • Packaging/Quantity: Tube/25 units

Specifications

  • Architecture: 8-bit
  • CPU Speed: 20 MHz
  • Program Memory Size: 3.5 KB
  • RAM Size: 128 bytes
  • Digital I/O Pins: 12
  • Analog Input Pins: 5
  • Communication Peripherals: USART, SPI, I2C
  • Operating Voltage Range: 2.0V to 5.5V
  • Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The PIC16LF722A-E/SP features a 20-pin DIP package with the following pin configuration: 1. VDD 2. RA0/AN0 3. RA1/AN1 4. RA2/AN2 5. RA3/AN3 6. RA4/T0CKI/C1OUT 7. VSS 8. OSC1/CLKIN 9. OSC2/CLKOUT 10. RC0/T1OSO/T1CKI 11. RC1/T1OSI/CCP2 12. RC2/CCP1 13. RC3/SCL/SDA 14. RC4/SDI/SDA 15. RC5/SDO 16. RC6/TX/CK 17. RC7/RX/DT 18. RB0/INT 19. RB1 20. RB2

Functional Features

  • Low-Power Consumption: The microcontroller is designed for low-power applications, making it suitable for battery-powered devices.
  • High Performance: Despite its low power consumption, the PIC16LF722A-E/SP offers high performance, enabling efficient execution of embedded control tasks.
  • Versatile Communication Peripherals: With built-in USART, SPI, and I2C communication peripherals, the microcontroller facilitates seamless interfacing with other devices.

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High performance
  • Versatile communication peripherals

Disadvantages

  • Limited program memory size
  • Limited RAM size

Working Principles

The PIC16LF722A-E/SP operates based on the Harvard architecture, featuring separate program and data memories. It executes instructions fetched from program memory and manipulates data stored in data memory to perform various tasks. The microcontroller's integrated peripherals and I/O pins enable it to interface with external components and sensors, allowing for versatile embedded control applications.

Detailed Application Field Plans

The PIC16LF722A-E/SP is well-suited for a wide range of embedded control applications, including but not limited to: - Home automation systems - Industrial control systems - Sensor interfaces - Battery-powered devices - Consumer electronics

Detailed and Complete Alternative Models

For applications requiring similar functionality, alternative models to the PIC16LF722A-E/SP include: - PIC16LF721A-E/SP - PIC16LF723A-E/SP - PIC16LF724A-E/SP

In summary, the PIC16LF722A-E/SP microcontroller offers a balance of low power consumption, high performance, and versatile communication peripherals, making it suitable for various embedded control applications. Its limitations in program memory and RAM size should be considered when selecting the appropriate microcontroller for a specific application.

Word count: 518

技術ソリューションにおける PIC16LF722A-E/SP の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the operating voltage range of PIC16LF722A-E/SP?
    - The operating voltage range of PIC16LF722A-E/SP is 1.8V to 3.6V.

  2. Can PIC16LF722A-E/SP be used in battery-powered applications?
    - Yes, PIC16LF722A-E/SP can be used in battery-powered applications due to its low power consumption.

  3. What are the key features of PIC16LF722A-E/SP?
    - Some key features of PIC16LF722A-E/SP include nanoWatt XLP technology for low power operation, multiple communication interfaces, and a wide operating voltage range.

  4. Is PIC16LF722A-E/SP suitable for temperature-sensitive applications?
    - Yes, PIC16LF722A-E/SP is suitable for temperature-sensitive applications as it has a wide operating temperature range and low power consumption.

  5. Can PIC16LF722A-E/SP be programmed using standard programming tools?
    - Yes, PIC16LF722A-E/SP can be programmed using standard programming tools such as MPLAB® ICD 4 or PICkit™ 4.

  6. What are the available communication interfaces on PIC16LF722A-E/SP?
    - PIC16LF722A-E/SP supports communication interfaces such as SPI, I2C, and UART for connectivity with other devices.

  7. Does PIC16LF722A-E/SP have built-in analog-to-digital converters (ADC)?
    - Yes, PIC16LF722A-E/SP features built-in 10-bit ADC modules for analog signal conversion.

  8. Can PIC16LF722A-E/SP be used in industrial control applications?
    - Yes, PIC16LF722A-E/SP is suitable for industrial control applications due to its robust design and communication capabilities.

  9. What development tools are available for PIC16LF722A-E/SP?
    - Development tools such as MPLAB X IDE and MPLAB Code Configurator can be used for software development and configuration of PIC16LF722A-E/SP.

  10. Is PIC16LF722A-E/SP RoHS compliant?
    - Yes, PIC16LF722A-E/SP is RoHS compliant, making it suitable for environmentally conscious designs.