PIC18F24K50-E/SS

Product Overview

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

High-performance 8-bit architecture
Low power consumption
Enhanced flash memory technology
Integrated USB communication interface
Wide operating voltage range
Rich peripheral set for versatile applications

Package

The PIC18F24K50-E/SS is available in a SSOP (Shrink Small Outline Package) package.

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a compact form factor.

Packaging/Quantity

The PIC18F24K50-E/SS is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

Architecture: 8-bit
Flash Memory: 16 KB
RAM: 768 bytes
Operating Voltage Range: 2.0V to 5.5V
Maximum CPU Speed: 48 MHz
Number of I/O Pins: 22
Communication Interfaces: USB, SPI, I2C, UART
Analog-to-Digital Converter (ADC): 10-bit, 13 channels
Timers: 3 x 8-bit, 1 x 16-bit
PWM Channels: 5
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC18F24K50-E/SS has a total of 28 pins, each serving a specific purpose. Here is the detailed pin configuration:

VDD - Power supply voltage
RA0 - General-purpose I/O pin
RA1 - General-purpose I/O pin
RA2 - General-purpose I/O pin
RA3 - General-purpose I/O pin
RA4 - General-purpose I/O pin
RA5 - General-purpose I/O pin
VSS - Ground
OSC1/CLKIN - Oscillator input
OSC2/CLKOUT - Oscillator output
RC0 - General-purpose I/O pin
RC1 - General-purpose I/O pin
RC2 - General-purpose I/O pin
RC3 - General-purpose I/O pin
RC4 - General-purpose I/O pin
RC5 - General-purpose I/O pin
VUSB - USB power supply voltage
D- - USB data minus
D+ - USB data plus
RB0 - General-purpose I/O pin
RB1 - General-purpose I/O pin
RB2 - General-purpose I/O pin
RB3 - General-purpose I/O pin
RB4 - General-purpose I/O pin
RB5 - General-purpose I/O pin
RB6 - General-purpose I/O pin
RB7 - General-purpose I/O pin
VSS - Ground

Functional Features

The PIC18F24K50-E/SS microcontroller offers several functional features, including:

Enhanced flash memory for program storage
Integrated USB communication interface for easy connectivity
Multiple communication interfaces (SPI, I2C, UART) for versatile data exchange
Analog-to-Digital Converter (ADC) for precise analog signal measurement
Timers and PWM channels for accurate timing and control
Low power consumption modes for energy-efficient operation
Rich set of general-purpose I/O pins for flexible interfacing with external devices

Advantages and Disadvantages

Advantages

High-performance 8-bit architecture for efficient processing
Low power consumption for extended battery life
Integrated USB interface simplifies connectivity
Versatile communication interfaces enable seamless data exchange
Compact form factor suitable for space-constrained applications

Disadvantages

Limited flash memory capacity compared to higher-end microcontrollers
Relatively fewer I/O pins compared to some other models
May require additional external components for certain applications

Working Principles

The PIC18F24K50-E/SS operates based on the principles of a typical microcontroller. It executes instructions stored in its flash memory, interacts with peripherals and external devices through its I/O pins, and communicates with other devices using various communication interfaces. The integrated USB interface allows for easy connection to a host computer or other USB-enabled devices.

Detailed Application Field Plans

The PIC18F24K50-E/SS finds applications in various fields, including but not limited to:

Industrial automation: Control systems, monitoring devices, and data acquisition units.
Consumer electronics: Home appliances, gaming consoles, and remote controls.
Automotive:

技術ソリューションにおける PIC18F24K50-E/SS の適用に関連する 10 件の一般的な質問と回答をリストします。

Question: What is the maximum operating frequency of PIC18F24K50-E/SS?
Answer: The maximum operating frequency of PIC18F24K50-E/SS is 64 MHz.
Question: What are the key features of PIC18F24K50-E/SS?
Answer: PIC18F24K50-E/SS features include USB 2.0, 16KB Flash program memory, and 256 bytes of EEPROM data memory.
Question: Can PIC18F24K50-E/SS be used for USB applications?
Answer: Yes, PIC18F24K50-E/SS is suitable for USB applications due to its built-in USB 2.0 module.
Question: What are the communication interfaces supported by PIC18F24K50-E/SS?
Answer: PIC18F24K50-E/SS supports SPI, I2C, and UART communication interfaces.
Question: Is PIC18F24K50-E/SS suitable for low-power applications?
Answer: Yes, PIC18F24K50-E/SS offers low-power operation modes, making it suitable for battery-powered applications.
Question: What development tools are available for programming PIC18F24K50-E/SS?
Answer: Development tools such as MPLAB X IDE and PICkit programmers can be used to program PIC18F24K50-E/SS.
Question: Can PIC18F24K50-E/SS be used in industrial control systems?
Answer: Yes, PIC18F24K50-E/SS is suitable for industrial control systems due to its robust design and communication capabilities.
Question: What are the recommended operating conditions for PIC18F24K50-E/SS?
Answer: The recommended operating voltage range for PIC18F24K50-E/SS is 2.0V to 5.5V.
Question: Does PIC18F24K50-E/SS have built-in analog-to-digital converters (ADC)?
Answer: Yes, PIC18F24K50-E/SS features 10-bit ADC modules for analog signal processing.
Question: Are there any application notes or reference designs available for PIC18F24K50-E/SS?
Answer: Yes, Microchip provides application notes and reference designs to assist with the implementation of PIC18F24K50-E/SS in various technical solutions.