Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
PIC24FJ128GA204T-I/ML
詳細を表示 DataSheets

PIC24FJ128GA204T-I/ML

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, industrial automation, consumer electronics
  • Characteristics: High performance, low power consumption, large memory capacity
  • Package: 44-pin QFN package
  • Essence: Advanced microcontroller with integrated peripherals and memory
  • Packaging/Quantity: Tray packaging, quantity varies

Specifications

  • Architecture: 16-bit
  • CPU Speed: Up to 16 MIPS
  • Flash Memory: 128 KB
  • RAM: 8 KB
  • Operating Voltage: 2.0V - 3.6V
  • Digital I/O Pins: 36
  • Analog Inputs: 12
  • Communication Interfaces: UART, SPI, I2C, USB
  • Timers: 5
  • ADC Resolution: 10-bit
  • Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC24FJ128GA204T-I/ML microcontroller has a total of 44 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RA0 - General-purpose I/O pin
  4. RA1 - General-purpose I/O pin
  5. RA2 - General-purpose I/O pin
  6. RA3 - General-purpose I/O pin
  7. RA4 - General-purpose I/O pin
  8. RA5 - General-purpose I/O pin
  9. MCLR - Master Clear input
  10. RB0 - General-purpose I/O pin
  11. RB1 - General-purpose I/O pin
  12. RB2 - General-purpose I/O pin
  13. RB3 - General-purpose I/O pin
  14. RB4 - General-purpose I/O pin
  15. RB5 - General-purpose I/O pin
  16. RB6 - General-purpose I/O pin
  17. RB7 - General-purpose I/O pin
  18. RB8 - General-purpose I/O pin
  19. RB9 - General-purpose I/O pin
  20. RB10 - General-purpose I/O pin
  21. RB11 - General-purpose I/O pin
  22. RB12 - General-purpose I/O pin
  23. RB13 - General-purpose I/O pin
  24. RB14 - General-purpose I/O pin
  25. RB15 - General-purpose I/O pin
  26. VCAP - Capacitor connection for internal voltage regulator
  27. VSS - Ground
  28. VDD - Power supply voltage
  29. RC0 - General-purpose I/O pin
  30. RC1 - General-purpose I/O pin
  31. RC2 - General-purpose I/O pin
  32. RC3 - General-purpose I/O pin
  33. RC4 - General-purpose I/O pin
  34. RC5 - General-purpose I/O pin
  35. RC6 - General-purpose I/O pin
  36. RC7 - General-purpose I/O pin
  37. RC8 - General-purpose I/O pin
  38. RC9 - General-purpose I/O pin
  39. RC10 - General-purpose I/O pin
  40. RC11 - General-purpose I/O pin
  41. RC12 - General-purpose I/O pin
  42. RC13 - General-purpose I/O pin
  43. RC14 - General-purpose I/O pin
  44. RC15 - General-purpose I/O pin

Functional Features

  • High-performance 16-bit CPU with up to 16 MIPS speed
  • Large memory capacity for storing program code and data
  • Integrated peripherals such as UART, SPI, I2C, and USB for communication
  • Multiple timers for precise timing operations
  • 10-bit ADC for analog signal acquisition
  • Low power consumption for energy-efficient applications

Advantages and Disadvantages

Advantages: - High performance and speed - Ample memory capacity - Versatile communication interfaces - Precise timing capabilities - Low power consumption

Disadvantages: - Limited number of I/O pins - Relatively high cost compared to lower-end microcontrollers

Working Principles

The PIC24FJ128GA204T-I/ML microcontroller operates based on the 16-bit architecture. It executes instructions stored in its flash memory, which can be programmed using a suitable development environment. The CPU processes data and controls the integrated peripherals to perform various tasks. The microcontroller communicates with external devices through its communication interfaces and interacts with the physical world through its I/O pins.

Detailed Application Field Plans

The PIC24FJ128GA204T-I/ML microcontroller is widely used in various application fields, including: 1. Embedded systems: Used in industrial automation, home automation, and automotive systems. 2. Consumer electronics: Found in smart appliances, wearable devices, and gaming consoles. 3. Medical devices: Used in patient monitoring systems, diagnostic equipment, and medical implants.

技術ソリューションにおける PIC24FJ128GA204T-I/ML の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. Question: What are the key features of PIC24FJ128GA204T-I/ML?
    Answer: The PIC24FJ128GA204T-I/ML features 16-bit microcontroller architecture, up to 128 KB flash program memory, and various communication interfaces.

  2. Question: How can I interface sensors with PIC24FJ128GA204T-I/ML?
    Answer: You can interface sensors using the built-in analog-to-digital converter (ADC) and various communication interfaces such as SPI, I2C, and UART.

  3. Question: What development tools are available for PIC24FJ128GA204T-I/ML?
    Answer: Development tools such as MPLAB X IDE, MPLAB XC16 Compiler, and various hardware debuggers are available for PIC24FJ128GA204T-I/ML.

  4. Question: Can PIC24FJ128GA204T-I/ML be used in battery-powered applications?
    Answer: Yes, PIC24FJ128GA204T-I/ML features low-power modes and can be used in battery-powered applications.

  5. Question: How can I program PIC24FJ128GA204T-I/ML?
    Answer: You can program PIC24FJ128GA204T-I/ML using MPLAB X IDE and MPLAB ICD 4 in-circuit debugger.

  6. Question: What communication interfaces are supported by PIC24FJ128GA204T-I/ML?
    Answer: PIC24FJ128GA204T-I/ML supports SPI, I2C, UART, and USB communication interfaces.

  7. Question: Can PIC24FJ128GA204T-I/ML be used in motor control applications?
    Answer: Yes, PIC24FJ128GA204T-I/ML features motor control peripherals and can be used in motor control applications.

  8. Question: Is there a development board available for PIC24FJ128GA204T-I/ML?
    Answer: Yes, there are several development boards available for PIC24FJ128GA204T-I/ML, such as the Explorer 16/32 Development Board.

  9. Question: What is the operating voltage range of PIC24FJ128GA204T-I/ML?
    Answer: PIC24FJ128GA204T-I/ML operates within a voltage range of 2.0V to 3.6V.

  10. Question: Can PIC24FJ128GA204T-I/ML be used in industrial control applications?
    Answer: Yes, PIC24FJ128GA204T-I/ML features robust peripherals and can be used in industrial control applications.