PIC24FJ32MC102-I/TL

Product Overview

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

High-performance 16-bit architecture
Low power consumption
Integrated peripherals for enhanced functionality
Ample memory capacity for storing program code and data
Wide operating voltage range
Robust communication interfaces for seamless connectivity

Package

The PIC24FJ32MC102-I/TL is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for electronic devices and embedded systems.

Packaging/Quantity

The PIC24FJ32MC102-I/TL is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

Microcontroller Family: PIC24F
Core Architecture: 16-bit
CPU Speed: Up to 16 MIPS
Program Memory Size: 32 KB
RAM Size: 2 KB
Operating Voltage Range: 2.0V to 3.6V
Number of I/O Pins: 28
Communication Interfaces: UART, SPI, I2C
Analog-to-Digital Converter (ADC) Resolution: 10-bit
Timers/Counters: Multiple timers/counters available
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC24FJ32MC102-I/TL has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

VDD - Power supply voltage
VSS - Ground
RA0 - General-purpose I/O pin
RA1 - General-purpose I/O pin
RA2 - General-purpose I/O pin
RA3 - General-purpose I/O pin
RA4 - General-purpose I/O pin
RA5 - General-purpose I/O pin
RB0 - General-purpose I/O pin
RB1 - General-purpose I/O pin
RB2 - General-purpose I/O pin
RB3 - General-purpose I/O pin
RB4 - General-purpose I/O pin
RB5 - General-purpose I/O pin
RB6 - General-purpose I/O pin
RB7 - General-purpose I/O pin
RB8 - General-purpose I/O pin
RB9 - General-purpose I/O pin
RB10 - General-purpose I/O pin
RB11 - General-purpose I/O pin
RB12 - General-purpose I/O pin
RB13 - General-purpose I/O pin
RB14 - General-purpose I/O pin
RB15 - General-purpose I/O pin
VCAP - Capacitor connection for internal voltage regulator
VUSB - USB power supply
AVDD - Analog power supply voltage
AVSS - Analog ground

Functional Features

High-speed processing capabilities
Integrated peripherals such as UART, SPI, and I2C for communication
Analog-to-Digital Converter (ADC) for precise analog signal measurement
Timers/counters for accurate timing and event counting
Low-power modes for energy efficiency
Enhanced security features for data protection
Flexible I/O configuration options

Advantages and Disadvantages

Advantages

High-performance 16-bit architecture enables efficient processing
Integrated peripherals simplify system design and reduce external component count
Wide operating voltage range allows for compatibility with various power sources
Ample memory capacity accommodates complex applications
Robust communication interfaces facilitate seamless connectivity

Disadvantages

Limited number of I/O pins may restrict the number of external devices that can be connected directly
Relatively higher cost compared to lower-end microcontrollers

Working Principles

The PIC24FJ32MC102-I/TL operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its program memory, interacts with peripherals and external devices through its I/O pins, and processes data according to the programmed algorithms.

Detailed Application Field Plans

The PIC24FJ32MC102-I/TL finds applications in various fields, including but not limited to: - Industrial automation - Consumer electronics - Medical devices - Automotive systems - Home automation - Internet of Things (IoT) devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the PIC24FJ32MC102-I/TL include: - PIC24FJ

技術ソリューションにおける PIC24FJ32MC102-I/TL の適用に関連する 10 件の一般的な質問と回答をリストします。

What is the maximum operating frequency of PIC24FJ32MC102-I/TL?
- The maximum operating frequency of PIC24FJ32MC102-I/TL is 32 MHz.
What are the key features of PIC24FJ32MC102-I/TL?
- Some key features of PIC24FJ32MC102-I/TL include 32 KB Flash program memory, 2 KB RAM, and various communication interfaces.
Can PIC24FJ32MC102-I/TL be used in battery-powered applications?
- Yes, PIC24FJ32MC102-I/TL is suitable for battery-powered applications due to its low power consumption features.
What development tools are available for programming PIC24FJ32MC102-I/TL?
- Development tools such as MPLAB X IDE and MPLAB XC16 Compiler can be used for programming PIC24FJ32MC102-I/TL.
Is PIC24FJ32MC102-I/TL suitable for motor control applications?
- Yes, PIC24FJ32MC102-I/TL is well-suited for motor control applications due to its integrated peripherals and high performance.
What communication interfaces are supported by PIC24FJ32MC102-I/TL?
- PIC24FJ32MC102-I/TL supports interfaces such as UART, SPI, and I2C for communication with other devices.
Can PIC24FJ32MC102-I/TL be used in industrial automation applications?
- Yes, PIC24FJ32MC102-I/TL is suitable for industrial automation applications due to its robust design and communication capabilities.
What are the temperature range specifications for PIC24FJ32MC102-I/TL?
- PIC24FJ32MC102-I/TL has a temperature range of -40°C to 125°C, making it suitable for a wide range of environments.
Are there any application notes or reference designs available for PIC24FJ32MC102-I/TL?
- Yes, Microchip provides application notes and reference designs to assist in the implementation of PIC24FJ32MC102-I/TL in various technical solutions.
Can PIC24FJ32MC102-I/TL be used in medical device applications?
- Yes, PIC24FJ32MC102-I/TL can be used in medical device applications, provided that it meets the necessary regulatory requirements for such applications.