Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
PIC24FJ64GA202-I/MM
詳細を表示 DataSheets

PIC24FJ64GA202-I/MM

Product Overview

Category

The PIC24FJ64GA202-I/MM belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • High-performance 16-bit architecture
  • Low power consumption
  • Wide operating voltage range
  • Integrated peripherals for enhanced functionality
  • Ample program and data memory
  • Flexible input/output options

Package

The PIC24FJ64GA202-I/MM is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities in a compact package.

Packaging/Quantity

The PIC24FJ64GA202-I/MM is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Microcontroller Family: PIC24F
  • Core Size: 16-bit
  • Program Memory Size: 64 KB
  • RAM Size: 8 KB
  • Number of I/O Pins: 35
  • Operating Voltage Range: 2.0V to 3.6V
  • Maximum Speed: 32 MHz
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC) Resolution: 10-bit
  • Timers/Counters: Multiple timers/counters available

Detailed Pin Configuration

The PIC24FJ64GA202-I/MM has a total of 35 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RA0 - General-purpose I/O pin
  4. RA1 - General-purpose I/O pin
  5. RA2 - General-purpose I/O pin
  6. RA3 - General-purpose I/O pin
  7. RA4 - General-purpose I/O pin
  8. RA5 - General-purpose I/O pin
  9. RB0 - General-purpose I/O pin
  10. RB1 - General-purpose I/O pin
  11. RB2 - General-purpose I/O pin
  12. RB3 - General-purpose I/O pin
  13. RB4 - General-purpose I/O pin
  14. RB5 - General-purpose I/O pin
  15. RB6 - General-purpose I/O pin
  16. RB7 - General-purpose I/O pin
  17. RB8 - General-purpose I/O pin
  18. RB9 - General-purpose I/O pin
  19. RB10 - General-purpose I/O pin
  20. RB11 - General-purpose I/O pin
  21. RB12 - General-purpose I/O pin
  22. RB13 - General-purpose I/O pin
  23. RB14 - General-purpose I/O pin
  24. RB15 - General-purpose I/O pin
  25. VCAP - Capacitor connection for internal voltage regulator
  26. VSS - Ground
  27. VDD - Power supply voltage
  28. OSC1/CLKI - Oscillator input/clock input
  29. OSC2/CLKO - Oscillator output/clock output
  30. MCLR/VPP - Master Clear/Voltage Programming Pin
  31. AN0 - Analog input channel 0
  32. AN1 - Analog input channel 1
  33. AN2 - Analog input channel 2
  34. AN3 - Analog input channel 3
  35. AVSS - Analog ground

Functional Features

The PIC24FJ64GA202-I/MM offers several functional features that enhance its usability and performance:

  • High-speed processing capabilities
  • Multiple communication interfaces for data exchange
  • Integrated analog-to-digital converter for precise measurements
  • Timers/counters for accurate timing and event control
  • Flexible input/output options for interfacing with external devices
  • Low power consumption modes for energy efficiency

Advantages and Disadvantages

Advantages

  • High-performance 16-bit architecture enables efficient data processing.
  • Integrated peripherals reduce the need for additional components.
  • Wide operating voltage range allows for compatibility with various power sources.
  • Ample program and data memory provide sufficient storage capacity.
  • Flexible input/output options facilitate easy integration with other devices.

Disadvantages

  • Limited number of I/O pins may restrict the complexity of connected devices.
  • Higher cost compared to lower-end microcontrollers with similar functionalities.
  • Steeper learning curve for beginners due to the advanced architecture.

Working Principles

The PIC24FJ64GA202-I/MM operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its program memory, processes data, and interacts with external devices through its input/output pins. The microcontroller's core performs arithmetic and logical operations, while integrated peripherals handle specific tasks such as communication, analog-to-digital conversion, and timing

技術ソリューションにおける PIC24FJ64GA202-I/MM の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum operating frequency of PIC24FJ64GA202-I/MM?

    • The maximum operating frequency of PIC24FJ64GA202-I/MM is 16 MHz.

  2. What are the key features of PIC24FJ64GA202-I/MM?

    • PIC24FJ64GA202-I/MM features 16 KB of Flash program memory, 2 KB of RAM, and various communication interfaces such as SPI, I2C, and UART.

  3. Can PIC24FJ64GA202-I/MM be used in battery-powered applications?

    • Yes, PIC24FJ64GA202-I/MM is suitable for battery-powered applications due to its low power consumption and multiple low-power modes.

  4. What development tools are available for programming PIC24FJ64GA202-I/MM?

    • Development tools such as MPLAB X IDE and MPLAB XC16 Compiler can be used for programming and debugging PIC24FJ64GA202-I/MM.

  5. Does PIC24FJ64GA202-I/MM support analog-to-digital conversion (ADC)?

    • Yes, PIC24FJ64GA202-I/MM features a 10-bit ADC module with multiple channels for analog-to-digital conversion.

  6. Is PIC24FJ64GA202-I/MM suitable for motor control applications?

    • Yes, PIC24FJ64GA202-I/MM is well-suited for motor control applications due to its high-resolution PWM modules and general-purpose input/output pins.

  7. What communication protocols does PIC24FJ64GA202-I/MM support?

    • PIC24FJ64GA202-I/MM supports popular communication protocols such as SPI, I2C, and UART, making it versatile for various connectivity requirements.

  8. Can PIC24FJ64GA202-I/MM be used in industrial automation systems?

    • Yes, PIC24FJ64GA202-I/MM is suitable for industrial automation systems due to its robust design, communication capabilities, and reliability.

  9. What are the temperature range specifications for PIC24FJ64GA202-I/MM?

    • PIC24FJ64GA202-I/MM has a wide operating temperature range of -40°C to 125°C, making it suitable for harsh environmental conditions.

  10. Are there any application notes or reference designs available for PIC24FJ64GA202-I/MM?

    • Yes, Microchip provides comprehensive application notes, reference designs, and technical documentation to assist in the implementation of PIC24FJ64GA202-I/MM in various technical solutions.