PIC24FV32KA304-E/PT

Product Overview

Category

The PIC24FV32KA304-E/PT belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

• High-performance 16-bit architecture
• Low power consumption
• Wide operating voltage range
• Integrated peripherals for enhanced functionality
• Ample program and data memory
• Flexible input/output options

Package

The PIC24FV32KA304-E/PT is available in a small form factor package, known as TQFP (Thin Quad Flat Pack).

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for a wide range of electronic applications.

Packaging/Quantity

The PIC24FV32KA304-E/PT is typically packaged in reels containing a specific quantity of microcontrollers. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

• Microcontroller Family: PIC24F
• Core Size: 16-bit
• Program Memory Size: 32KB
• RAM Size: 2KB
• Number of I/O Pins: 28
• Operating Voltage Range: 2.0V to 3.6V
• Maximum Speed: 32 MHz
• Data Bus Width: 16-bit
• ADC Resolution: 10-bit
• Number of Timers: 5
• Communication Interfaces: UART, SPI, I2C

Detailed Pin Configuration

The PIC24FV32KA304-E/PT microcontroller has a total of 28 pins. The pin configuration is as follows:

1. VDD - Power supply voltage
2. VSS - Ground
3. RA0 - General-purpose I/O pin
4. RA1 - General-purpose I/O pin
5. RA2 - General-purpose I/O pin
6. RA3 - General-purpose I/O pin
7. RA4 - General-purpose I/O pin
8. RA5 - General-purpose I/O pin
9. MCLR - Master Clear input
10. RB0 - General-purpose I/O pin
11. RB1 - General-purpose I/O pin
12. RB2 - General-purpose I/O pin
13. RB3 - General-purpose I/O pin
14. RB4 - General-purpose I/O pin
15. RB5 - General-purpose I/O pin
16. RB6 - General-purpose I/O pin
17. RB7 - General-purpose I/O pin
18. RB8 - General-purpose I/O pin
19. RB9 - General-purpose I/O pin
20. RB10 - General-purpose I/O pin
21. RB11 - General-purpose I/O pin
22. RB12 - General-purpose I/O pin
23. RB13 - General-purpose I/O pin
24. RB14 - General-purpose I/O pin
25. RB15 - General-purpose I/O pin
26. VCAP - Capacitor connection for internal voltage regulator
27. VSS - Ground
28. VDD - Power supply voltage

Functional Features

• High-performance CPU with efficient instruction set
• Integrated peripherals such as UART, SPI, and I2C for communication
• Analog-to-Digital Converter (ADC) for precise analog measurements
• Timers for accurate timing control
• Flexible input/output pins for interfacing with external devices
• Low power consumption modes for energy efficiency

Advantages and Disadvantages

Advantages

• High-performance 16-bit architecture allows for efficient processing of complex tasks.
• Integrated peripherals provide enhanced functionality and reduce the need for external components.
• Wide operating voltage range enables compatibility with various power sources.
• Ample program and data memory allow for the implementation of complex algorithms.
• Flexible input/output options facilitate easy interfacing with external devices.

Disadvantages

• Limited number of I/O pins may restrict the connectivity options in certain applications.
• Higher cost compared to lower-end microcontrollers with similar specifications.
• Steeper learning curve due to the complexity of the 16-bit architecture.

Working Principles

The PIC24FV32KA304-E/PT microcontroller operates based on the principles of digital logic and embedded control. It executes instructions stored in its program memory to perform various tasks, such as data processing, communication, and control. The integrated peripherals and flexible I/O options enable the microcontroller to interact with external devices and sensors, making it suitable for a wide range of applications.

Detailed Application Field Plans

The PIC24FV32KA304-E/PT microcontroller finds applications in various fields, including but not limited to:

1. Industrial automation: Control systems, motor control, and monitoring devices.
2. Consumer electronics: Home appliances, gaming consoles, and audio/video equipment.
3. Automotive: Engine control units