PIC32MX130F064DT-V/PT

Product Overview

• Category: Microcontroller
• Use: Embedded systems, IoT devices, consumer electronics
• Characteristics: High-performance, low-power consumption, integrated peripherals
• Package: TQFP
• Essence: 32-bit microcontroller with MIPS32® M4K® Core
• Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

• Processor: 32-bit MIPS32® M4K® Core
• Clock Speed: Up to 40 MHz
• Flash Memory: 64 KB
• RAM: 8 KB
• Operating Voltage: 2.3V to 3.6V
• Digital I/O Pins: 53
• Analog Input Channels: 16
• Communication Interfaces: UART, SPI, I2C, USB
• Timers: 5 x 16-bit, 1 x 32-bit
• ADC Resolution: 10-bit
• PWM Channels: 5
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC32MX130F064DT-V/PT microcontroller has a total of 64 pins. The pin configuration is as follows:

• Pins 1-8: Digital I/O or analog input pins
• Pins 9-16: Digital I/O or analog input pins
• Pins 17-24: Digital I/O or analog input pins
• Pins 25-32: Digital I/O or analog input pins
• Pins 33-40: Digital I/O or analog input pins
• Pins 41-48: Digital I/O or analog input pins
• Pins 49-56: Digital I/O or analog input pins
• Pins 57-64: Digital I/O or analog input pins

Functional Features

• High-performance microcontroller with MIPS32® M4K® Core
• Low-power consumption for energy-efficient applications
• Integrated peripherals such as UART, SPI, I2C, and USB for easy communication
• Multiple timers and PWM channels for precise timing and control
• 10-bit ADC for analog signal acquisition
• Wide operating temperature range for versatile applications

Advantages and Disadvantages

Advantages

• High-performance processing capabilities
• Low-power consumption for energy efficiency
• Integrated peripherals simplify system design
• Ample digital I/O and analog input pins for versatile connectivity
• Wide operating temperature range allows usage in various environments

Disadvantages

• Limited flash memory and RAM capacity compared to higher-end microcontrollers
• Limited number of PWM channels may restrict complex control applications

Working Principles

The PIC32MX130F064DT-V/PT microcontroller operates based on the MIPS32® M4K® Core architecture. It executes instructions stored in its flash memory and utilizes its integrated peripherals to perform various tasks. The microcontroller communicates with external devices through its communication interfaces, processes analog signals using its ADC, and controls output devices using its PWM channels. It operates within a specified voltage range and can withstand a wide temperature range.

Detailed Application Field Plans

The PIC32MX130F064DT-V/PT microcontroller is suitable for a wide range of applications, including:

1. Embedded systems: Used in industrial automation, robotics, and control systems.
2. IoT devices: Enables connectivity and data processing in smart home devices, wearables, and environmental monitoring systems.
3. Consumer electronics: Powers various consumer electronic products such as home appliances, gaming consoles, and audio devices.

Detailed and Complete Alternative Models

1. PIC32MX130F064H-I/PT: Similar specifications but with extended temperature range (-40°C to +105°C).
2. PIC32MX130F064H-V/PT: Similar specifications but with extended temperature range (-40°C to +105°C) and higher operating voltage (2.3V to 3.6V).
3. PIC32MX130F064L-I/PT: Similar specifications but with lower operating voltage (1.8V to 3.6V).

These alternative models provide options based on specific application requirements, temperature ranges, and operating voltages.

Word count: 529 words