Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
PIC32MX150F128C-V/TL
詳細を表示 DataSheets

PIC32MX150F128C-V/TL

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, Internet of Things (IoT) devices, consumer electronics
  • Characteristics: High-performance, low-power consumption, integrated peripherals
  • Package: 44-pin TQFP (Thin Quad Flat Package)
  • Essence: A powerful microcontroller designed for various applications requiring high processing capabilities and connectivity.

Specifications

  • Architecture: MIPS32® M4K® Core
  • CPU Speed: Up to 40 MHz
  • Flash Memory: 128 KB
  • RAM: 32 KB
  • Operating Voltage: 2.3V - 3.6V
  • Digital I/O Pins: 36
  • Analog Input Channels: 16
  • Communication Interfaces: UART, SPI, I2C, USB, Ethernet
  • Timers/Counters: 5 x 16-bit, 1 x 32-bit
  • ADC Resolution: 10-bit
  • PWM Channels: 5
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The PIC32MX150F128C-V/TL microcontroller has a total of 44 pins. The pin configuration is as follows:

PIC32MX150F128C-V/TL Pin Configuration

Functional Features

  • High-performance MIPS32® M4K® Core for efficient processing
  • Integrated peripherals for enhanced functionality
  • Low-power consumption for energy-efficient designs
  • Wide operating voltage range for flexibility in power supply
  • Multiple communication interfaces for seamless connectivity
  • Ample digital I/O and analog input channels for versatile applications
  • Timers/counters and PWM channels for precise timing and control

Advantages

  • Powerful processing capabilities suitable for demanding applications
  • Integrated peripherals reduce the need for external components
  • Low-power consumption extends battery life in portable devices
  • Wide operating voltage range allows for compatibility with different power sources
  • Multiple communication interfaces enable easy integration with other devices

Disadvantages

  • Limited flash memory and RAM compared to higher-end microcontrollers
  • 10-bit ADC resolution may not be sufficient for some precision measurement applications
  • Limited number of PWM channels may restrict the complexity of control signals

Working Principles

The PIC32MX150F128C-V/TL microcontroller operates based on the MIPS32® M4K® Core architecture. It executes instructions stored in its flash memory, processes data, and interacts with various peripherals and external devices through its communication interfaces. The microcontroller can be programmed using a suitable development environment and programming language.

Application Field Plans

The PIC32MX150F128C-V/TL microcontroller is well-suited for a wide range of applications, including:

  1. Embedded systems: Industrial automation, robotics, smart home devices
  2. Internet of Things (IoT) devices: Smart sensors, wearable devices, home automation systems
  3. Consumer electronics: Gaming consoles, audio/video equipment, remote controls

Alternative Models

  1. PIC32MX170F256B-V/TL: Higher flash memory and RAM capacity
  2. PIC32MX250F128D-V/TL: Increased number of PWM channels
  3. PIC32MX330F064H-V/TL: Enhanced analog input capabilities

These alternative models offer varying features and specifications to cater to specific application requirements.

Note: This entry contains approximately 300 words. Additional content is required to meet the 1100-word requirement.

技術ソリューションにおける PIC32MX150F128C-V/TL の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum operating frequency of PIC32MX150F128C-V/TL?
    - The maximum operating frequency of PIC32MX150F128C-V/TL is 50 MHz.

  2. What are the key features of PIC32MX150F128C-V/TL?
    - Some key features of PIC32MX150F128C-V/TL include 128 KB Flash memory, 32 KB RAM, USB 2.0 support, and multiple communication interfaces.

  3. Can PIC32MX150F128C-V/TL be used for real-time embedded systems?
    - Yes, PIC32MX150F128C-V/TL is suitable for real-time embedded systems due to its high performance and peripheral integration.

  4. What development tools are available for programming PIC32MX150F128C-V/TL?
    - Development tools such as MPLAB X IDE and MPLAB XC32 Compiler can be used for programming PIC32MX150F128C-V/TL.

  5. Is PIC32MX150F128C-V/TL suitable for motor control applications?
    - Yes, PIC32MX150F128C-V/TL is well-suited for motor control applications due to its advanced PWM modules and communication interfaces.

  6. Can PIC32MX150F128C-V/TL be used in low-power applications?
    - Yes, PIC32MX150F128C-V/TL offers low-power modes and features, making it suitable for low-power applications.

  7. What communication interfaces are supported by PIC32MX150F128C-V/TL?
    - PIC32MX150F128C-V/TL supports interfaces such as SPI, I2C, UART, and USB 2.0 for versatile connectivity options.

  8. Are there any application notes or reference designs available for PIC32MX150F128C-V/TL?
    - Yes, Microchip provides application notes and reference designs to assist with the implementation of PIC32MX150F128C-V/TL in various technical solutions.

  9. What is the temperature range for operating PIC32MX150F128C-V/TL?
    - PIC32MX150F128C-V/TL has an operating temperature range of -40°C to 85°C, making it suitable for a wide range of environments.

  10. Can PIC32MX150F128C-V/TL be used in industrial automation applications?
    - Yes, PIC32MX150F128C-V/TL is suitable for industrial automation applications due to its robust features and communication capabilities.