Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
PIC32MX150F128DT-V/ML
詳細を表示 DataSheets

PIC32MX150F128DT-V/ML

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, Internet of Things (IoT) devices, consumer electronics
  • Characteristics: High-performance, low-power consumption, integrated peripherals, large memory capacity
  • Package: 44-pin TQFP (Thin Quad Flat Package)
  • Essence: A powerful microcontroller designed for a wide range of applications
  • Packaging/Quantity: Tray packaging, available in various quantities

Specifications

  • Microcontroller Family: PIC32MX
  • Core: MIPS32® M4K®
  • CPU Speed: Up to 40 MHz
  • Flash Memory: 128 KB
  • RAM: 32 KB
  • Operating Voltage: 2.3V - 3.6V
  • Digital I/O Pins: 36
  • Analog Input Channels: 12
  • Communication Interfaces: UART, SPI, I2C, USB
  • Timers: 5 x 16-bit, 1 x 32-bit
  • ADC Resolution: 10-bit
  • PWM Channels: 5
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC32MX150F128DT-V/ML microcontroller has a total of 44 pins. Here is the detailed pin configuration:

  • Pin 1: VDD (Power Supply)
  • Pin 2: VSS (Ground)
  • Pin 3: OSC1/CLKI (Oscillator Input/Clock Input)
  • Pin 4: OSC2/CLKO (Oscillator Output/Clock Output)
  • Pin 5: RA0/AN0 (General Purpose I/O/Analog Input)
  • Pin 6: RA1/AN1 (General Purpose I/O/Analog Input)
  • ...
  • Pin 44: RB15/AN9/SS2 (General Purpose I/O/Analog Input/Slave Select 2)

Functional Features

  • High-performance MIPS32® M4K® core for efficient processing
  • Integrated peripherals such as UART, SPI, I2C, and USB for communication
  • Large memory capacity with 128 KB flash memory and 32 KB RAM
  • Multiple timers and PWM channels for precise timing and control
  • 10-bit ADC for analog signal acquisition
  • Low-power consumption for energy-efficient applications
  • Wide operating temperature range for versatile usage scenarios

Advantages and Disadvantages

Advantages: - Powerful processing capabilities - Abundance of integrated peripherals - Ample memory capacity - Versatile operating voltage range - Suitable for a wide range of applications

Disadvantages: - Limited number of digital I/O pins - Relatively small ADC resolution compared to some other models

Working Principles

The PIC32MX150F128DT-V/ML microcontroller operates based on the MIPS32® M4K® core architecture. It executes instructions stored in its flash memory and interacts with various peripherals to perform desired tasks. The integrated peripherals enable communication with other devices, while the timers and PWM channels facilitate precise timing and control. The microcontroller's low-power design ensures efficient operation, making it suitable for battery-powered applications.

Detailed Application Field Plans

The PIC32MX150F128DT-V/ML microcontroller finds applications in various fields, including:

  1. Embedded Systems: Used in industrial automation, robotics, and control systems.
  2. Internet of Things (IoT) Devices: Enables connectivity and control in smart home devices, wearables, and environmental monitoring systems.
  3. Consumer Electronics: Powers consumer products like home appliances, gaming consoles, and audio/video equipment.
  4. Automotive: Used in automotive electronics for engine control, infotainment systems, and driver assistance features.
  5. Medical Devices: Enables functionality in medical equipment such as patient monitoring systems and diagnostic devices.

Detailed and Complete Alternative Models

  1. PIC32MX170F256B-I/SP: Similar microcontroller with higher flash memory capacity (256 KB) and more digital I/O pins.
  2. PIC32MX130F064B-I/ML: Lower-cost alternative with smaller flash memory capacity (64 KB) but similar features and performance.
  3. PIC32MX250F128D-I/PT: Microcontroller with additional CAN bus interface for automotive applications.

(Note: This is a sample list of alternative models. Please refer to the manufacturer's documentation for a complete list of alternatives.)

Word count: 536 words

技術ソリューションにおける PIC32MX150F128DT-V/ML の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum operating frequency of PIC32MX150F128DT-V/ML?
    - The maximum operating frequency of PIC32MX150F128DT-V/ML is 50 MHz.

  2. What are the key features of PIC32MX150F128DT-V/ML?
    - Some key features of PIC32MX150F128DT-V/ML include 128 KB Flash memory, 32 KB RAM, USB OTG, and multiple communication interfaces.

  3. Can PIC32MX150F128DT-V/ML be used for real-time embedded systems?
    - Yes, PIC32MX150F128DT-V/ML is suitable for real-time embedded systems due to its high performance and peripheral integration.

  4. What development tools are available for programming PIC32MX150F128DT-V/ML?
    - Development tools such as MPLAB X IDE and MPLAB XC32 Compiler can be used for programming PIC32MX150F128DT-V/ML.

  5. Is PIC32MX150F128DT-V/ML suitable for low-power applications?
    - Yes, PIC32MX150F128DT-V/ML offers low-power modes and features, making it suitable for low-power applications.

  6. Can PIC32MX150F128DT-V/ML interface with external sensors and devices?
    - Yes, PIC32MX150F128DT-V/ML supports various communication interfaces like SPI, I2C, and UART for interfacing with external sensors and devices.

  7. What are the available package options for PIC32MX150F128DT-V/ML?
    - PIC32MX150F128DT-V/ML is available in a 64-pin QFN package.

  8. Does PIC32MX150F128DT-V/ML have built-in security features?
    - Yes, PIC32MX150F128DT-V/ML includes security features such as code protection and data encryption.

  9. Can PIC32MX150F128DT-V/ML be used for motor control applications?
    - Yes, PIC32MX150F128DT-V/ML can be used for motor control applications with its PWM and timer modules.

  10. Are there any application notes or reference designs available for PIC32MX150F128DT-V/ML?
    - Yes, Microchip provides application notes and reference designs for PIC32MX150F128DT-V/ML to assist in various technical solutions.