Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
PIC32MZ1024EFG124-E/TL
詳細を表示 DataSheets

PIC32MZ1024EFG124-E/TL

Introduction

The PIC32MZ1024EFG124-E/TL belongs to the category of microcontrollers and is widely used in various electronic applications. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded control applications
  • Characteristics: High performance, low power consumption, extensive peripheral integration
  • Package: 124-pin TQFP
  • Essence: Advanced microcontroller unit with integrated peripherals
  • Packaging/Quantity: Tape & Reel, 250 units per reel

Specifications

  • Processor: MIPS32® microAptiv™
  • Clock Speed: Up to 200 MHz
  • Memory: 1 MB Flash, 512 KB RAM
  • Operating Voltage: 2.3V - 3.6V
  • I/O Pins: 83
  • Communication Interfaces: USB, UART, SPI, I2C, Ethernet
  • Analog Inputs: 16-bit ADC, 10-bit DAC
  • Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

For a detailed pin configuration, please refer to the manufacturer's datasheet or user manual.

Functional Features

  • Extensive Peripheral Integration: The PIC32MZ1024EFG124-E/TL integrates a wide range of peripherals, reducing the need for external components.
  • High Performance: With a clock speed of up to 200 MHz, it offers high processing capabilities for demanding applications.
  • Low Power Consumption: Designed for energy efficiency, making it suitable for battery-powered devices.

Advantages and Disadvantages

  • Advantages:
    • Extensive peripheral integration reduces external component count
    • High clock speed enables fast processing
    • Low power consumption extends battery life
  • Disadvantages:
    • Limited availability of alternative models with similar specifications
    • Higher cost compared to lower-end microcontrollers

Working Principles

The PIC32MZ1024EFG124-E/TL operates on the principle of executing instructions stored in its flash memory, interacting with peripherals through its I/O pins, and processing data to perform specific tasks as programmed by the user.

Detailed Application Field Plans

  • Industrial Automation: Control systems, motor drives, and monitoring devices
  • Consumer Electronics: Smart home devices, IoT applications, and wearable technology
  • Automotive: Engine control units, infotainment systems, and vehicle networking

Detailed and Complete Alternative Models

  • PIC32MX795F512L-80I/PT: Lower clock speed but similar peripheral integration
  • STM32F407VGT6: Comparable performance and peripheral set from a different manufacturer

In conclusion, the PIC32MZ1024EFG124-E/TL is a versatile microcontroller with advanced features suitable for a wide range of embedded control applications.

[Word Count: 411]

技術ソリューションにおける PIC32MZ1024EFG124-E/TL の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum operating frequency of PIC32MZ1024EFG124-E/TL?
    - The maximum operating frequency of PIC32MZ1024EFG124-E/TL is 200 MHz.

  2. What are the key features of PIC32MZ1024EFG124-E/TL?
    - PIC32MZ1024EFG124-E/TL features a high-performance MIPS M5150 CPU, ample memory, and various peripherals for connectivity and control.

  3. Can PIC32MZ1024EFG124-E/TL be used in industrial automation applications?
    - Yes, PIC32MZ1024EFG124-E/TL is suitable for industrial automation due to its robust features and performance.

  4. Does PIC32MZ1024EFG124-E/TL support Ethernet connectivity?
    - Yes, PIC32MZ1024EFG124-E/TL supports Ethernet connectivity through its integrated MAC and PHY.

  5. What development tools are available for PIC32MZ1024EFG124-E/TL?
    - Development tools such as MPLAB X IDE and MPLAB Harmony framework are available for PIC32MZ1024EFG124-E/TL.

  6. Is PIC32MZ1024EFG124-E/TL suitable for real-time embedded systems?
    - Yes, PIC32MZ1024EFG124-E/TL is well-suited for real-time embedded systems with its high performance and peripheral integration.

  7. Can PIC32MZ1024EFG124-E/TL be used in medical device applications?
    - Yes, PIC32MZ1024EFG124-E/TL can be utilized in medical device applications due to its reliability and performance.

  8. What communication interfaces does PIC32MZ1024EFG124-E/TL support?
    - PIC32MZ1024EFG124-E/TL supports interfaces such as SPI, I2C, UART, USB, and CAN.

  9. Is there a low-power mode available for PIC32MZ1024EFG124-E/TL?
    - Yes, PIC32MZ1024EFG124-E/TL features low-power modes to optimize energy consumption.

  10. Are there any application notes or reference designs available for PIC32MZ1024EFG124-E/TL?
    - Yes, Microchip provides application notes and reference designs to assist in implementing PIC32MZ1024EFG124-E/TL in various technical solutions.