Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
PIC32MZ2048ECG064-I/MR
詳細を表示 DataSheets

PIC32MZ2048ECG064-I/MR

Introduction

The PIC32MZ2048ECG064-I/MR is a microcontroller belonging to the PIC32 family, designed and manufactured by Microchip Technology. This entry provides an overview of the product, including its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded control applications, IoT devices, industrial automation, consumer electronics
  • Characteristics: High performance, low power consumption, extensive peripheral integration
  • Package: 64-pin QFN (Quad Flat No-Lead)
  • Essence: Advanced 32-bit microcontroller with integrated peripherals
  • Packaging/Quantity: Tape & Reel, 250 units per reel

Specifications

  • Architecture: MIPS32® microAptiv™
  • CPU Speed: Up to 200 MHz
  • Flash Memory: 2 MB
  • RAM: 512 KB
  • Operating Voltage: 2.3V to 3.6V
  • I/O Pins: 50
  • Communication Interfaces: SPI, I2C, UART, USB, Ethernet
  • Analog-to-Digital Converter (ADC): 28 channels, 12-bit resolution
  • Timers: 5 x 16-bit, 4 x 32-bit

Detailed Pin Configuration

The PIC32MZ2048ECG064-I/MR features a 64-pin QFN package with specific pin assignments for power, ground, communication interfaces, analog inputs, and general-purpose I/O.

Functional Features

  • High Performance: Operates at up to 200 MHz, suitable for demanding applications
  • Extensive Peripheral Integration: Integrated ADC, DAC, USB, Ethernet, and multiple communication interfaces
  • Security Features: Hardware encryption engine, secure boot, and tamper detection
  • Low Power Consumption: Multiple low-power modes for energy-efficient operation

Advantages and Disadvantages

Advantages

  • High processing power
  • Rich set of integrated peripherals
  • Enhanced security features

Disadvantages

  • Relatively complex for simple applications
  • Higher cost compared to lower-end microcontrollers

Working Principles

The PIC32MZ2048ECG064-I/MR operates on the MIPS32 microAptiv architecture, utilizing its high-speed CPU, integrated peripherals, and advanced security features to execute embedded control tasks, handle communication protocols, and process sensor data.

Detailed Application Field Plans

  • IoT Devices: Utilize the integrated communication interfaces for connecting to IoT networks
  • Industrial Automation: Control and monitor industrial equipment using the extensive I/O capabilities
  • Consumer Electronics: Power efficient and high-performance microcontroller for various consumer electronic products

Detailed and Complete Alternative Models

  • PIC32MX170F256B
  • PIC32MM0256GPM064
  • PIC32MZ0512EFE064

In conclusion, the PIC32MZ2048ECG064-I/MR is a versatile microcontroller suitable for a wide range of embedded control applications, offering high performance, extensive peripheral integration, and advanced security features.

(Word count: 464)

技術ソリューションにおける PIC32MZ2048ECG064-I/MR の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. Question: What are the key features of PIC32MZ2048ECG064-I/MR?
    Answer: The PIC32MZ2048ECG064-I/MR features a high-performance 32-bit MIPS core, extensive peripheral set, and ample memory for demanding applications.

  2. Question: How can I interface external components with PIC32MZ2048ECG064-I/MR?
    Answer: The PIC32MZ2048ECG064-I/MR supports various communication interfaces such as SPI, I2C, UART, and USB to easily interface with external components.

  3. Question: What development tools are available for PIC32MZ2048ECG064-I/MR?
    Answer: Development tools such as MPLAB X IDE, MPLAB Harmony framework, and various third-party tools are available for PIC32MZ2048ECG064-I/MR.

  4. Question: Can PIC32MZ2048ECG064-I/MR be used in real-time applications?
    Answer: Yes, PIC32MZ2048ECG064-I/MR is suitable for real-time applications due to its high processing power and advanced peripherals.

  5. Question: What are the power requirements for PIC32MZ2048ECG064-I/MR?
    Answer: PIC32MZ2048ECG064-I/MR operates at a wide voltage range, typically 2.3V to 3.6V, and offers low-power modes for energy-efficient operation.

  6. Question: Is there a secure boot feature in PIC32MZ2048ECG064-I/MR?
    Answer: Yes, PIC32MZ2048ECG064-I/MR includes a secure boot capability to ensure the integrity of the firmware during startup.

  7. Question: Can PIC32MZ2048ECG064-I/MR support graphical user interfaces (GUIs)?
    Answer: Yes, PIC32MZ2048ECG064-I/MR can support GUIs through its integrated graphics controller and display interfaces.

  8. Question: Are there any known limitations or common issues with PIC32MZ2048ECG064-I/MR?
    Answer: While PIC32MZ2048ECG064-I/MR is a robust microcontroller, it's important to consider factors such as heat dissipation and proper PCB layout for optimal performance.

  9. Question: What are the available memory options for PIC32MZ2048ECG064-I/MR?
    Answer: PIC32MZ2048ECG064-I/MR offers various memory options including Flash memory, SRAM, and EEPROM for program storage and data retention.

  10. Question: Can PIC32MZ2048ECG064-I/MR be used in industrial automation applications?
    Answer: Yes, PIC32MZ2048ECG064-I/MR is well-suited for industrial automation applications due to its reliability, performance, and extensive peripheral support.