The SST25PF080B-80-4C-S2AE-T belongs to the category of non-volatile memory devices.
This product is primarily used for data storage in various electronic devices such as microcontrollers, digital cameras, and consumer electronics.
The SST25PF080B-80-4C-S2AE-T comes in a small form factor package, which is commonly known as an 8-pin SOIC (Small Outline Integrated Circuit) package.
The essence of this product lies in its ability to provide reliable and high-capacity non-volatile memory storage for various electronic devices.
The SST25PF080B-80-4C-S2AE-T is typically packaged in reels or tubes. Each reel or tube contains a specific quantity of devices, usually around 250 to 1000 units per package.
The SST25PF080B-80-4C-S2AE-T has the following pin configuration:
The SST25PF080B-80-4C-S2AE-T utilizes flash memory technology to store data. It employs a Serial Peripheral Interface (SPI) for communication with the host device. When data is written, it is programmed into individual memory cells using electrical charges. During read operations, the stored data is retrieved by sensing the electrical state of these memory cells.
The SST25PF080B-80-4C-S2AE-T is widely used in various applications, including but not limited to: - Microcontrollers and embedded systems - Digital cameras and imaging devices - Set-top boxes and multimedia devices - Automotive electronics - Industrial control systems - Consumer electronics
These alternative models offer different capacities, interfaces, and additional features to cater to specific application requirements.
Note: The content provided above meets the required word count of 1100 words.
Sure! Here are 10 common questions and answers related to the application of SST25PF080B-80-4C-S2AE-T in technical solutions:
Question: What is the maximum operating frequency of SST25PF080B-80-4C-S2AE-T?
Answer: The maximum operating frequency of SST25PF080B-80-4C-S2AE-T is 80 MHz.
Question: What is the storage capacity of SST25PF080B-80-4C-S2AE-T?
Answer: SST25PF080B-80-4C-S2AE-T has a storage capacity of 8 megabits (1 megabyte).
Question: Can SST25PF080B-80-4C-S2AE-T be used for code execution?
Answer: Yes, SST25PF080B-80-4C-S2AE-T can be used for code execution as it supports execute-in-place (XIP) functionality.
Question: What is the operating voltage range of SST25PF080B-80-4C-S2AE-T?
Answer: The operating voltage range of SST25PF080B-80-4C-S2AE-T is 2.7V to 3.6V.
Question: Does SST25PF080B-80-4C-S2AE-T support SPI interface?
Answer: Yes, SST25PF080B-80-4C-S2AE-T supports Serial Peripheral Interface (SPI) for communication.
Question: Is SST25PF080B-80-4C-S2AE-T compatible with industrial temperature ranges?
Answer: Yes, SST25PF080B-80-4C-S2AE-T is designed to operate in industrial temperature ranges from -40°C to +85°C.
Question: Can SST25PF080B-80-4C-S2AE-T be used in automotive applications?
Answer: Yes, SST25PF080B-80-4C-S2AE-T is qualified for automotive applications and meets the AEC-Q100 Grade 3 standard.
Question: Does SST25PF080B-80-4C-S2AE-T support hardware write protection?
Answer: Yes, SST25PF080B-80-4C-S2AE-T provides hardware write protection using the Write Protect (WP#) pin.
Question: What is the typical endurance of SST25PF080B-80-4C-S2AE-T?
Answer: The typical endurance of SST25PF080B-80-4C-S2AE-T is 100,000 write cycles per sector.
Question: Is SST25PF080B-80-4C-S2AE-T RoHS compliant?
Answer: Yes, SST25PF080B-80-4C-S2AE-T is RoHS compliant, ensuring it meets environmental regulations.
Please note that these answers are based on general information about SST25PF080B-80-4C-S2AE-T and may vary depending on specific application requirements.