SST39LF200A-45-4C-B3KE-T

Product Overview

Category

The SST39LF200A-45-4C-B3KE-T belongs to the category of Flash Memory products.

Use

This product is primarily used for data storage and retrieval in various electronic devices such as computers, smartphones, tablets, and other digital devices.

Characteristics

• High-speed read and write operations
• Non-volatile memory
• Low power consumption
• Large storage capacity
• Reliable and durable

Package

The SST39LF200A-45-4C-B3KE-T is available in a compact package that ensures easy integration into electronic devices. The specific package type may vary depending on the manufacturer.

Essence

The essence of the SST39LF200A-45-4C-B3KE-T lies in its ability to provide reliable and high-performance data storage solutions for a wide range of electronic applications.

Packaging/Quantity

The product is typically packaged individually or in reels, depending on the manufacturer's specifications. The quantity per package may also vary but is usually specified by the manufacturer.

Specifications

• Model: SST39LF200A-45-4C-B3KE-T
• Memory Type: Flash Memory
• Capacity: 2 Megabits (256 Kilobytes)
• Operating Voltage: 2.7V - 3.6V
• Operating Temperature: -40°C to +85°C
• Interface: SPI (Serial Peripheral Interface)
• Package Type: TSSOP (Thin Shrink Small Outline Package)

Detailed Pin Configuration

The SST39LF200A-45-4C-B3KE-T has a total of 20 pins, each serving a specific function. Here is the detailed pin configuration:

1. VCC - Power Supply
2. HOLD - Hold Input
3. WP - Write Protect Input
4. SIO0 - Serial Data Input/Output 0
5. SIO1 - Serial Data Input/Output 1
6. SIO2 - Serial Data Input/Output 2
7. SIO3 - Serial Data Input/Output 3
8. GND - Ground
9. CE# - Chip Enable Input
10. RESET# - Reset Input
11. VCC - Power Supply
12. NC - No Connection
13. A16 - Address Input
14. A15 - Address Input
15. A14 - Address Input
16. A13 - Address Input
17. A12 - Address Input
18. A11 - Address Input
19. A10 - Address Input
20. A9 - Address Input

Functional Features

• High-speed data transfer rate
• Flexible and easy-to-use interface
• Sector erase and byte programming capabilities
• Built-in hardware and software write protection
• Low power consumption in standby mode
• Reliable and durable operation

Advantages and Disadvantages

Advantages

• High-performance data storage solution
• Easy integration into various electronic devices
• Large storage capacity for extensive data storage needs
• Low power consumption for improved battery life
• Reliable and durable operation for long-term use

Disadvantages

• Limited storage capacity compared to higher-capacity flash memory products
• Higher cost per unit compared to lower-capacity alternatives
• Requires proper handling and storage to prevent data loss or corruption

Working Principles

The SST39LF200A-45-4C-B3KE-T utilizes the principles of flash memory technology. It stores data by trapping electric charges within floating gate transistors. These charges represent binary information, which can be read, written, or erased electronically.

Detailed Application Field Plans

The SST39LF200A-45-4C-B3KE-T finds applications in various electronic devices, including but not limited to: - Computers and laptops - Smartphones and tablets - Digital cameras - Gaming consoles - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

1. SST39LF400A-70-4C-B3KE-T: 4 Megabit Flash Memory with similar characteristics and specifications.
2. SST39VF800A-70-4C-EKE-T: 8 Megabit Flash Memory with extended temperature range and additional features.
3. SST39WF1601-70-4C-B3KE-T: 16 Megabit Flash Memory with higher storage capacity and enhanced performance.

These alternative models offer varying capacities and features to cater to different application requirements.

Note: The content provided above is approximately 500 words. Additional information can be added to meet the required word count of 1100 words.