TC1055-3.0VCT713

Product Overview

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

Package: TC1055-3.0VCT713 comes in a compact surface mount package.
Essence: It is a high-performance voltage regulator with advanced features.
Packaging/Quantity: The product is typically packaged in reels and available in various quantities.

Specifications

The specifications of TC1055-3.0VCT713 are as follows:

Input Voltage Range: 4.2V to 16V
Output Voltage: 3.0V
Output Current: Up to 1A
Dropout Voltage: 200mV (typical)
Line Regulation: ±0.05% (typical)
Load Regulation: ±0.1% (typical)
Quiescent Current: 75µA (typical)
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

TC1055-3.0VCT713 has the following pin configuration:

VIN: Input voltage pin
GND: Ground pin
VOUT: Output voltage pin
EN: Enable pin (active high)

Functional Features

Low dropout voltage: The TC1055-3.0VCT713 exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
Low quiescent current: With a low quiescent current, the voltage regulator minimizes power consumption during standby or idle modes.
Overcurrent protection: The device incorporates overcurrent protection, safeguarding the circuit from excessive current flow.
Thermal shutdown: In case of excessive temperature, the regulator activates thermal shutdown to prevent damage.

Advantages and Disadvantages

Advantages

High-performance voltage regulation
Compact package size
Wide input voltage range
Low dropout voltage
Overcurrent protection

Disadvantages

Limited output current capacity (up to 1A)

Working Principles

TC1055-3.0VCT713 operates based on a linear voltage regulation principle. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage despite variations in the input voltage or load conditions.

Detailed Application Field Plans

TC1055-3.0VCT713 finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to TC1055-3.0VCT713 are: - LM1117-3.3V - LT1763-3.3 - TPS79633

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, TC1055-3.0VCT713 is a high-performance voltage regulator with excellent characteristics such as low dropout voltage, wide input voltage range, and overcurrent protection. It finds applications in various electronic devices across different industries.

技術ソリューションにおける TC1055-3.0VCT713 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TC1055-3.0VCT713 in technical solutions:

Q: What is TC1055-3.0VCT713? A: TC1055-3.0VCT713 is a specific model or variant of a technical component used in various electronic applications.
Q: What is the voltage rating of TC1055-3.0VCT713? A: The voltage rating of TC1055-3.0VCT713 is 3.0V, meaning it is designed to operate within a 3.0V power supply range.
Q: What type of technical solutions can TC1055-3.0VCT713 be used in? A: TC1055-3.0VCT713 can be used in a wide range of technical solutions, including but not limited to consumer electronics, automotive systems, industrial automation, and medical devices.
Q: What are the key features of TC1055-3.0VCT713? A: Some key features of TC1055-3.0VCT713 may include low power consumption, high accuracy, small form factor, and compatibility with various communication protocols.
Q: How can TC1055-3.0VCT713 be integrated into a technical solution? A: TC1055-3.0VCT713 can be integrated into a technical solution by connecting it to the relevant circuitry, ensuring proper power supply, and following the manufacturer's guidelines for usage.
Q: Can TC1055-3.0VCT713 be used in battery-powered devices? A: Yes, TC1055-3.0VCT713 can be used in battery-powered devices as it operates within a 3.0V power supply range, making it suitable for such applications.
Q: Is TC1055-3.0VCT713 compatible with common microcontrollers? A: Yes, TC1055-3.0VCT713 is designed to be compatible with common microcontrollers, allowing for seamless integration into various technical solutions.
Q: What is the typical accuracy of TC1055-3.0VCT713? A: The typical accuracy of TC1055-3.0VCT713 may vary depending on the specific application, but it is generally known for its high accuracy and precision.
Q: Can TC1055-3.0VCT713 be used in harsh environments? A: TC1055-3.0VCT713 may have certain environmental specifications provided by the manufacturer. It is important to check if it meets the requirements of the intended harsh environment.
Q: Where can I find more information about TC1055-3.0VCT713? A: You can find more information about TC1055-3.0VCT713 in the product datasheet, technical documentation, or by contacting the manufacturer directly.