画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MTFC32GJWEF-4M AIT Z

MTFC32GJWEF-4M AIT Z

Product Overview

Category

MTFC32GJWEF-4M AIT Z belongs to the category of NAND Flash Memory.

Use

This product is primarily used for data storage in various electronic devices such as smartphones, tablets, digital cameras, and solid-state drives (SSDs).

Characteristics

  • High-speed data transfer
  • Non-volatile memory
  • Compact size
  • Low power consumption
  • Durable and reliable

Package

MTFC32GJWEF-4M AIT Z is available in a small form factor package, making it suitable for integration into compact electronic devices.

Essence

The essence of this product lies in its ability to store and retrieve large amounts of data quickly and reliably, enhancing the performance and functionality of electronic devices.

Packaging/Quantity

MTFC32GJWEF-4M AIT Z is typically packaged individually or in bulk quantities, depending on the requirements of the customer or manufacturer.

Specifications

  • Capacity: 32GB
  • Interface: Universal Flash Storage (UFS)
  • Voltage: 2.7V - 3.6V
  • Operating Temperature: -25°C to 85°C
  • Read Speed: Up to 550MB/s
  • Write Speed: Up to 520MB/s

Detailed Pin Configuration

  1. VCC - Power supply voltage
  2. GND - Ground
  3. CE - Chip Enable
  4. RE - Read Enable
  5. WE - Write Enable
  6. R/B - Ready/Busy status
  7. D0-D7 - Data I/O lines
  8. CLK - Clock input
  9. RESET - Reset signal

Functional Features

  • Error Correction Code (ECC) for data integrity
  • Wear Leveling for even distribution of write cycles
  • Bad Block Management for efficient use of memory
  • Trim Command support for enhanced performance
  • Power Loss Protection to prevent data loss during unexpected power outages

Advantages and Disadvantages

Advantages

  • High-speed data transfer improves overall device performance.
  • Non-volatile memory ensures data retention even without power.
  • Compact size allows for integration into small electronic devices.
  • Low power consumption prolongs battery life.
  • Durable and reliable, with a long lifespan.

Disadvantages

  • Limited capacity compared to other storage options.
  • Relatively higher cost per gigabyte compared to traditional hard drives.

Working Principles

MTFC32GJWEF-4M AIT Z utilizes NAND flash memory technology. It stores data in a series of memory cells that can be electrically programmed and erased. When data is written, electrical charges are stored in the memory cells, representing binary values. To read the data, the charges are detected and converted back into digital information.

Detailed Application Field Plans

MTFC32GJWEF-4M AIT Z finds applications in various electronic devices, including: 1. Smartphones and tablets for storing apps, photos, videos, and documents. 2. Digital cameras for capturing and storing high-resolution images and videos. 3. Solid-state drives (SSDs) for fast and reliable data storage in computers and laptops.

Detailed and Complete Alternative Models

  1. MTFC64GJDEA-4M IT - 64GB NAND Flash Memory with similar specifications but higher capacity.
  2. MTFC128GJDEA-4M IT - 128GB NAND Flash Memory with similar specifications but even higher capacity.
  3. MTFC256GJDEA-4M IT - 256GB NAND Flash Memory with similar specifications and maximum capacity.

These alternative models provide increased storage capacity options for different application requirements.

Word count: 529 words

技術ソリューションにおける MTFC32GJWEF-4M AIT Z の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MTFC32GJWEF-4M AIT Z in technical solutions:

  1. Q: What is the storage capacity of the MTFC32GJWEF-4M AIT Z? A: The MTFC32GJWEF-4M AIT Z has a storage capacity of 32GB.

  2. Q: What interface does the MTFC32GJWEF-4M AIT Z use? A: The MTFC32GJWEF-4M AIT Z uses the eMMC (embedded MultiMediaCard) interface.

  3. Q: What is the operating voltage range for the MTFC32GJWEF-4M AIT Z? A: The operating voltage range for the MTFC32GJWEF-4M AIT Z is typically between 2.7V and 3.6V.

  4. Q: Can the MTFC32GJWEF-4M AIT Z be used in industrial applications? A: Yes, the MTFC32GJWEF-4M AIT Z is designed for industrial applications and can withstand harsh environments.

  5. Q: Does the MTFC32GJWEF-4M AIT Z support wear-leveling and error correction? A: Yes, the MTFC32GJWEF-4M AIT Z supports wear-leveling and error correction techniques to enhance reliability and lifespan.

  6. Q: What is the maximum read and write speed of the MTFC32GJWEF-4M AIT Z? A: The MTFC32GJWEF-4M AIT Z has a maximum sequential read speed of up to 300MB/s and a maximum sequential write speed of up to 100MB/s.

  7. Q: Can the MTFC32GJWEF-4M AIT Z be used as a boot device? A: Yes, the MTFC32GJWEF-4M AIT Z can be used as a boot device in various embedded systems.

  8. Q: Is the MTFC32GJWEF-4M AIT Z compatible with different operating systems? A: Yes, the MTFC32GJWEF-4M AIT Z is compatible with various operating systems, including Linux and Windows.

  9. Q: What is the temperature range for the MTFC32GJWEF-4M AIT Z? A: The MTFC32GJWEF-4M AIT Z has an extended temperature range of -40°C to +85°C, making it suitable for industrial applications.

  10. Q: Does the MTFC32GJWEF-4M AIT Z support power loss protection? A: Yes, the MTFC32GJWEF-4M AIT Z supports power loss protection mechanisms to prevent data loss during unexpected power outages.

Please note that these answers are based on general information about the MTFC32GJWEF-4M AIT Z and may vary depending on specific product specifications and requirements.