1N4750CP/TR12
Product Overview
Category:
The 1N4750CP/TR12 belongs to the category of Zener diodes.
Use:
It is commonly used for voltage regulation and protection in electronic circuits.
Characteristics:
- Zener voltage: 6.2V
- Power dissipation: 1.3W
- Package type: Axial leaded
- Operating temperature range: -65°C to +200°C
Package:
The 1N4750CP/TR12 is typically available in a DO-41 package.
Essence:
This Zener diode is essential for maintaining a constant voltage across a load in a circuit.
Packaging/Quantity:
The 1N4750CP/TR12 is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Zener voltage: 6.2V
- Power dissipation: 1.3W
- Maximum forward voltage: 1.1V
- Reverse current: 5μA
- Temperature coefficient: 5mV/°C
Detailed Pin Configuration
The 1N4750CP/TR12 has a standard axial leaded package with two leads. The anode is connected to the positive side of the circuit, while the cathode is connected to the negative side.
Functional Features
- Voltage regulation: Maintains a constant voltage across the load.
- Overvoltage protection: Prevents damage to sensitive components by shunting excess voltage.
Advantages and Disadvantages
Advantages
- Precise voltage regulation
- Compact size
- Cost-effective solution for voltage regulation
Disadvantages
- Limited power dissipation capability
- Susceptible to thermal runaway if not properly heatsinked
Working Principles
The 1N4750CP/TR12 operates based on the Zener effect, where it maintains a nearly constant voltage across its terminals when reverse-biased at or above its breakdown voltage.
Detailed Application Field Plans
The 1N4750CP/TR12 is widely used in various applications such as: - Voltage regulators - Overvoltage protection circuits - Power supplies - Signal clamping circuits
Detailed and Complete Alternative Models
Some alternative models to the 1N4750CP/TR12 include: - 1N4734A - 1N4742A - BZX55C6V2
In conclusion, the 1N4750CP/TR12 Zener diode is a crucial component in electronic circuits, providing precise voltage regulation and overvoltage protection. Its compact size and cost-effectiveness make it a popular choice for various applications.
[Word count: 398]
技術ソリューションにおける 1N4750CP/TR12 の適用に関連する 10 件の一般的な質問と回答をリストします。
What is the 1N4750CP/TR12?
- The 1N4750CP/TR12 is a 1W Zener diode with a voltage rating of 27V.
What are the typical applications of 1N4750CP/TR12?
- It is commonly used in voltage regulation, surge suppression, and overvoltage protection circuits.
What is the maximum power dissipation of 1N4750CP/TR12?
- The maximum power dissipation is 1W.
What is the voltage tolerance of 1N4750CP/TR12?
- The voltage tolerance is typically +/-5%.
What is the operating temperature range for 1N4750CP/TR12?
- The operating temperature range is usually -65°C to +200°C.
How does 1N4750CP/TR12 behave in reverse bias?
- In reverse bias, it acts as a normal diode until the breakdown voltage is reached, at which point it conducts heavily to maintain a nearly constant voltage across it.
Can 1N4750CP/TR12 be used for voltage reference applications?
- Yes, it can be used as a stable reference voltage source in various electronic circuits.
What are the key characteristics of 1N4750CP/TR12?
- Some key characteristics include low dynamic impedance, sharp breakdown voltage, and good stability over a wide range of currents.
Is 1N4750CP/TR12 suitable for high-frequency applications?
- It is not typically recommended for high-frequency applications due to its inherent capacitance and response time.
Are there any precautions to consider when using 1N4750CP/TR12?
- It's important to ensure proper heat dissipation and avoid exceeding the maximum power dissipation to prevent damage to the diode. Additionally, attention should be paid to the voltage and current requirements of the specific application.