Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
1N5250A (DO-35)
詳細を表示 DataSheets

1N5250A (DO-35) - Encyclopedia Entry

Introduction

The 1N5250A (DO-35) is a diode belonging to the category of semiconductor devices. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor device
  • Use: Rectification, voltage regulation, signal demodulation
  • Characteristics: Small signal diode, low forward voltage drop, high surge current capability
  • Package: DO-35
  • Essence: Silicon diode
  • Packaging/Quantity: Typically available in reels or bulk packaging

Specifications

  • Voltage Rating: 50V
  • Forward Current: 200mA
  • Reverse Current: 5μA
  • Power Dissipation: 500mW
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The 1N5250A (DO-35) diode has two pins, anode and cathode, with the following pinout: - Anode (A) - Pin 1 - Cathode (K) - Pin 2

Functional Features

  • Rectification: Converts alternating current (AC) to direct current (DC)
  • Voltage Regulation: Maintains a stable output voltage
  • Signal Demodulation: Extracts the original modulating signal from a modulated carrier wave

Advantages and Disadvantages

  • Advantages:
    • Small size
    • Low forward voltage drop
    • High surge current capability
  • Disadvantages:
    • Limited maximum voltage rating
    • Sensitivity to reverse voltage

Working Principles

The 1N5250A (DO-35) operates based on the principle of semiconductor junction behavior, allowing current flow in one direction while blocking it in the opposite direction.

Detailed Application Field Plans

The 1N5250A (DO-35) finds applications in various fields such as: - Power supplies - Signal demodulation circuits - Voltage regulation circuits - Electronic instrumentation

Detailed and Complete Alternative Models

Some alternative models to the 1N5250A (DO-35) include: - 1N914 - 1N4148 - 1N5819 - 1N4001

In conclusion, the 1N5250A (DO-35) diode serves as a crucial component in electronic circuits for rectification, voltage regulation, and signal demodulation, offering a balance of advantages and disadvantages that make it suitable for specific applications across various industries.

Word count: 366

技術ソリューションにおける 1N5250A (DO-35) の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the 1N5250A (DO-35) diode used for?

    • The 1N5250A diode is commonly used for voltage regulation and protection in various electronic circuits.

  2. What is the maximum forward current rating of the 1N5250A diode?

    • The maximum forward current rating of the 1N5250A diode is typically 200 mA.

  3. What is the maximum reverse voltage rating of the 1N5250A diode?

    • The maximum reverse voltage rating of the 1N5250A diode is 50 volts.

  4. Can the 1N5250A diode be used for rectification purposes?

    • Yes, the 1N5250A diode can be used for low-power rectification applications.

  5. What are the typical applications of the 1N5250A diode?

    • Typical applications include voltage clamping, overvoltage protection, and signal demodulation in electronic circuits.

  6. What is the power dissipation rating of the 1N5250A diode?

    • The power dissipation rating is typically around 500 mW.

  7. Is the 1N5250A diode suitable for high-frequency applications?

    • The 1N5250A diode is generally not recommended for high-frequency applications due to its relatively slow switching characteristics.

  8. Can multiple 1N5250A diodes be connected in series for higher voltage applications?

    • Yes, multiple 1N5250A diodes can be connected in series to achieve a higher combined reverse voltage rating.

  9. What is the temperature range for the 1N5250A diode?

    • The 1N5250A diode is typically rated for operation within a temperature range of -65°C to 175°C.

  10. Are there any specific soldering or mounting considerations for the 1N5250A diode?

    • It is important to follow proper soldering techniques and avoid subjecting the diode to excessive mechanical stress during mounting to ensure reliable performance.