1N5535BUR-1

Product Overview

Use

It is commonly used in electronic circuits for rectification and voltage regulation.

Characteristics

Forward Voltage: 0.7V
Reverse Voltage: 200V
Current Rating: 1A
Fast Switching Speed

Package

The 1N5535BUR-1 is typically available in a DO-41 package.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

Forward Voltage: 0.7V
Reverse Voltage: 200V
Average Rectified Current: 1A
Peak Surge Current: 30A
Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The 1N5535BUR-1 has two pins, anode, and cathode, which are identified by their physical orientation within the DO-41 package.

Functional Features

High current capability
Fast switching speed
Low forward voltage drop
Reliable reverse voltage protection

Advantages

Suitable for high-frequency applications
Compact and easy to integrate into circuit designs
Reliable performance under various operating conditions

Disadvantages

Limited reverse voltage tolerance compared to some other diode models
Sensitive to temperature variations in certain applications

Working Principles

The 1N5535BUR-1 operates based on the principles of semiconductor physics, utilizing the properties of P-N junctions to allow current flow in one direction while blocking it in the reverse direction.

Detailed Application Field Plans

The 1N5535BUR-1 is widely used in: - Power supply units - Voltage regulation circuits - Rectifiers in electronic equipment - Signal demodulation circuits

Detailed and Complete Alternative Models

Some alternative models to the 1N5535BUR-1 include: - 1N4001 - 1N4148 - 1N5819 - 1N5399

In conclusion, the 1N5535BUR-1 semiconductor diode offers reliable performance in rectification and voltage regulation applications, making it a valuable component in various electronic circuits.

[Word Count: 294]

技術ソリューションにおける 1N5535BUR-1 の適用に関連する 10 件の一般的な質問と回答をリストします。

What is the 1N5535BUR-1 diode used for?
- The 1N5535BUR-1 diode is commonly used for voltage regulation and transient suppression in various technical solutions.
What is the maximum forward voltage of the 1N5535BUR-1 diode?
- The maximum forward voltage of the 1N5535BUR-1 diode is typically around 1.1 volts at a forward current of 200 mA.
What is the reverse breakdown voltage of the 1N5535BUR-1 diode?
- The reverse breakdown voltage of the 1N5535BUR-1 diode is typically 36 volts, making it suitable for transient suppression applications.
Can the 1N5535BUR-1 diode handle high current surges?
- Yes, the 1N5535BUR-1 diode is designed to handle high current surges, making it suitable for transient suppression in technical solutions.
Is the 1N5535BUR-1 diode suitable for use in automotive applications?
- Yes, the 1N5535BUR-1 diode is often used in automotive applications for voltage regulation and transient suppression.
What is the temperature range for the 1N5535BUR-1 diode?
- The 1N5535BUR-1 diode is typically rated for operation over a temperature range of -65°C to 175°C, making it suitable for a wide range of environments.
Does the 1N5535BUR-1 diode require a heat sink for certain applications?
- Depending on the specific application and power dissipation requirements, a heat sink may be recommended for the 1N5535BUR-1 diode to ensure optimal performance.
Can the 1N5535BUR-1 diode be used in parallel for higher current applications?
- Yes, the 1N5535BUR-1 diode can be used in parallel to increase the current-handling capability for specific technical solutions.
What are some common failure modes for the 1N5535BUR-1 diode?
- Common failure modes for the 1N5535BUR-1 diode include thermal runaway under high current conditions and voltage breakdown due to excessive reverse voltage.
Are there any specific layout considerations when using the 1N5535BUR-1 diode in a circuit?
- It is important to consider proper PCB layout and thermal management to ensure the 1N5535BUR-1 diode operates within its specified parameters and achieves optimal performance in technical solutions.