Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
1N5733B
詳細を表示 DataSheets

1N5733B - Diode Encyclopedia Entry

Introduction

The 1N5733B is a diode belonging to the category of semiconductor devices. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor device
  • Use: Rectification and voltage regulation
  • Characteristics: High efficiency, low forward voltage drop
  • Package: DO-41 (DO-204AL)
  • Essence: Schottky diode
  • Packaging/Quantity: Typically available in reels or bulk packaging

Specifications

  • Forward Voltage Drop: Typically 0.45V at 1A
  • Reverse Voltage: 30V
  • Forward Current: 1A
  • Operating Temperature Range: -65°C to 125°C
  • Storage Temperature Range: -65°C to 150°C

Detailed Pin Configuration

The 1N5733B typically has two pins: 1. Anode (A) 2. Cathode (K)

Functional Features

  • Fast switching speed
  • Low power loss
  • High efficiency
  • Suitable for high-frequency applications

Advantages and Disadvantages

Advantages

  • Low forward voltage drop
  • Fast recovery time
  • High current capability

Disadvantages

  • Limited reverse voltage rating
  • Higher cost compared to standard silicon diodes

Working Principles

The 1N5733B is a Schottky diode, which utilizes a metal-semiconductor junction to achieve fast switching and low forward voltage drop. When a forward bias is applied, it allows current to flow with minimal voltage loss.

Detailed Application Field Plans

The 1N5733B is commonly used in the following applications: - Switching power supplies - Voltage clamping circuits - Reverse polarity protection - High-frequency rectification

Detailed and Complete Alternative Models

Some alternative models to the 1N5733B include: - 1N5817 - SS12 - SB130

In summary, the 1N5733B is a Schottky diode known for its high efficiency and low forward voltage drop. It finds widespread use in various applications such as switching power supplies and voltage clamping circuits.

Word count: 330

技術ソリューションにおける 1N5733B の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the 1N5733B diode used for?

    • The 1N5733B diode is commonly used as a rectifier in power supply applications.

  2. What are the key specifications of the 1N5733B diode?

    • The 1N5733B diode typically has a maximum repetitive reverse voltage of 200 volts and a forward current of 1 ampere.

  3. Can the 1N5733B diode be used in high-frequency applications?

    • No, the 1N5733B diode is not suitable for high-frequency applications due to its recovery time and capacitance.

  4. What are the typical applications of the 1N5733B diode?

    • The 1N5733B diode is commonly used in power supplies, battery chargers, and other low-frequency rectification circuits.

  5. Does the 1N5733B diode require a heatsink?

    • It depends on the application and the amount of current passing through the diode. In high-current applications, a heatsink may be necessary.

  6. What is the forward voltage drop of the 1N5733B diode?

    • The forward voltage drop of the 1N5733B diode is typically around 1 volt at the rated forward current.

  7. Is the 1N5733B diode suitable for automotive applications?

    • Yes, the 1N5733B diode can be used in automotive applications where its voltage and current ratings are sufficient.

  8. Can the 1N5733B diode handle surge currents?

    • Yes, the 1N5733B diode is capable of handling short-duration surge currents within its specified limits.

  9. What is the temperature range for the 1N5733B diode?

    • The 1N5733B diode is typically rated for operation within a temperature range of -65°C to 175°C.

  10. Are there any common failure modes associated with the 1N5733B diode?

    • Common failure modes include thermal runaway under high current conditions and reverse voltage breakdown if the maximum ratings are exceeded.