Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
1N5930C G
詳細を表示 DataSheets

1N5930C G - Semiconductor Diode

Basic Information Overview

  • Category: Semiconductor Diode
  • Use: Rectification and voltage regulation
  • Characteristics: High current capability, low forward voltage drop
  • Package: DO-41 (Axial Lead)
  • Essence: Efficient rectification and voltage regulation
  • Packaging/Quantity: Typically available in reels of 500 or 1000 units

Specifications

  • Voltage Rating: 30V
  • Current Rating: 1A
  • Forward Voltage Drop: 0.5V at 1A
  • Reverse Leakage Current: 5µA at 25°C

Detailed Pin Configuration

The 1N5930C G is a two-terminal device with an anode and a cathode. In the DO-41 package, the anode is denoted by a band around one end of the diode.

Functional Features

  • Efficient rectification of AC to DC
  • Low forward voltage drop minimizes power loss
  • Fast switching characteristics

Advantages and Disadvantages

Advantages

  • High current capability
  • Low forward voltage drop
  • Fast recovery time
  • Compact and easy to use

Disadvantages

  • Limited reverse voltage tolerance
  • Susceptible to thermal runaway at high currents

Working Principles

The 1N5930C G operates on the principle of semiconductor junction rectification. When forward-biased, it allows current to flow with minimal voltage drop. In the reverse-biased state, it exhibits low leakage current.

Detailed Application Field Plans

The 1N5930C G is commonly used in: - Power supplies - Voltage regulators - Rectifiers in electronic circuits - Battery chargers

Detailed and Complete Alternative Models

  • 1N5817: 20V, 1A Schottky Diode
  • 1N4001: 50V, 1A Silicon Rectifier Diode
  • 1N5408: 1000V, 3A General Purpose Rectifier

This comprehensive range of alternative models provides options for different voltage and current requirements in various applications.

This content provides a detailed overview of the 1N5930C G semiconductor diode, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

技術ソリューションにおける 1N5930C G の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum voltage rating of 1N5930C G?

    • The maximum voltage rating of 1N5930C G is 6.2V.

  2. What is the current rating of 1N5930C G?

    • The current rating of 1N5930C G is typically 3A.

  3. What is the forward voltage drop of 1N5930C G?

    • The forward voltage drop of 1N5930C G is approximately 1V at the rated current.

  4. What are the typical applications of 1N5930C G?

    • 1N5930C G is commonly used in voltage regulation, overvoltage protection, and general rectification applications.

  5. What is the temperature range for 1N5930C G?

    • The operating temperature range for 1N5930C G is typically -65°C to +175°C.

  6. Is 1N5930C G suitable for automotive applications?

    • Yes, 1N5930C G is often used in automotive electronics due to its ruggedness and reliability.

  7. Does 1N5930C G require a heat sink for high-power applications?

    • Yes, for high-power applications, it is recommended to use a heat sink to dissipate heat effectively.

  8. Can 1N5930C G be used in reverse polarity protection circuits?

    • Yes, 1N5930C G can be employed in reverse polarity protection circuits to prevent damage from reverse voltage.

  9. What is the package type of 1N5930C G?

    • 1N5930C G is typically available in a DO-201AD (DO-27) package.

  10. Are there any special handling considerations for 1N5930C G?

    • It is important to observe proper ESD precautions and storage conditions to maintain the integrity of 1N5930C G.