Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
1N984A
詳細を表示 DataSheets

1N984A Semiconductor Diode

Product Overview

Category:

The 1N984A is a semiconductor diode belonging to the category of rectifier diodes.

Use:

It is commonly used in electronic circuits for rectification purposes, converting alternating current (AC) to direct current (DC).

Characteristics:

  • Forward Voltage Drop: 0.7V
  • Maximum Reverse Voltage: 1000V
  • Maximum Forward Current: 1A
  • Fast switching speed

Package:

The 1N984A is typically available in a DO-41 package.

Essence:

This diode is essential for converting AC to DC in various electronic applications.

Packaging/Quantity:

The 1N984A is usually packaged in reels or tubes and is available in quantities ranging from hundreds to thousands.

Specifications

  • Forward Voltage Drop: 0.7V
  • Maximum Reverse Voltage: 1000V
  • Maximum Forward Current: 1A
  • Operating Temperature Range: -65°C to 175°C
  • Storage Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The 1N984A has two pins, an anode, and a cathode. The anode is connected to the positive side of the circuit, while the cathode is connected to the negative side.

Functional Features

  • Efficient rectification of AC to DC
  • Fast switching speed
  • High reverse voltage capability

Advantages

  • Low forward voltage drop
  • High reverse voltage capability
  • Fast switching speed

Disadvantages

  • Limited maximum forward current compared to other diodes
  • Sensitive to temperature variations

Working Principles

The 1N984A operates based on the principle of creating a one-way flow of current when it is forward-biased, allowing only the positive half-cycle of an AC signal to pass through.

Detailed Application Field Plans

The 1N984A is widely used in power supplies, battery chargers, inverters, and other electronic devices requiring rectification of AC to DC.

Detailed and Complete Alternative Models

Some alternative models to the 1N984A include the 1N4001, 1N4004, and 1N5408 diodes, which offer similar rectification capabilities with varying voltage and current ratings.

In conclusion, the 1N984A semiconductor diode is a crucial component in electronic circuits for rectifying AC to DC, offering efficient performance and high reverse voltage capability. Its use spans across various electronic applications, making it an indispensable part of modern electronics.

[Word Count: 382]

技術ソリューションにおける 1N984A の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is 1N984A?

    • 1N984A is a silicon rectifier diode commonly used in electronic circuits for converting alternating current (AC) to direct current (DC).

  2. What are the key specifications of 1N984A?

    • The key specifications include a maximum repetitive peak reverse voltage of 200 volts, average forward current of 1 ampere, and a forward voltage drop of around 1 volt.

  3. How is 1N984A typically used in technical solutions?

    • 1N984A is often used in power supply circuits, voltage regulation, and signal demodulation applications due to its ability to efficiently convert AC to DC and its low forward voltage drop.

  4. What are the important considerations when using 1N984A in a circuit?

    • It's crucial to consider the maximum voltage and current requirements of the circuit, as well as the thermal characteristics of the diode to ensure proper heat dissipation.

  5. Can 1N984A be used in high-frequency applications?

    • While 1N984A can function at moderate frequencies, it may not be suitable for very high-frequency applications due to its inherent capacitance and switching speed limitations.

  6. Are there any common alternative diodes to 1N984A?

    • Yes, some common alternatives include 1N400X series diodes, which have similar voltage and current ratings, or Schottky diodes for lower forward voltage drop applications.

  7. What are the typical failure modes of 1N984A?

    • Common failure modes include overvoltage breakdown, excessive forward current leading to thermal damage, and degradation due to prolonged exposure to high temperatures.

  8. How should 1N984A be handled and stored to maintain its performance?

    • It should be stored in a cool, dry environment to prevent moisture absorption and kept away from strong magnetic fields or static electricity. Handling should be done with ESD precautions.

  9. Can 1N984A be used in automotive applications?

    • Yes, 1N984A can be used in automotive electronics for tasks such as voltage rectification and protection due to its rugged construction and ability to handle moderate power levels.

  10. Where can I find detailed application notes and reference designs for using 1N984A in technical solutions?

    • Detailed application notes and reference designs can often be found in the datasheet provided by the manufacturer, as well as in technical literature related to power electronics and circuit design.