Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
1PMT4120/TR13
詳細を表示 DataSheets

1PMT4120/TR13

Product Overview

Category

The 1PMT4120/TR13 belongs to the category of semiconductor devices.

Use

It is commonly used as a voltage regulator in electronic circuits.

Characteristics

  • Voltage regulation capabilities
  • Small form factor
  • Low power consumption

Package

The 1PMT4120/TR13 is typically available in a small surface-mount package.

Essence

This product serves as a crucial component in stabilizing voltage levels within electronic systems.

Packaging/Quantity

It is usually packaged in reels and is available in varying quantities depending on the supplier.

Specifications

  • Maximum Forward Voltage: 1.5V
  • Reverse Standoff Voltage: 12V
  • Breakdown Voltage: 13.3V
  • Maximum Reverse Leakage Current: 1µA
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The 1PMT4120/TR13 typically consists of three pins: 1. Anode 2. Cathode 3. No Connection (NC)

Functional Features

  • Voltage regulation
  • Overvoltage protection
  • Reverse polarity protection

Advantages and Disadvantages

Advantages

  • Compact size
  • Efficient voltage regulation
  • Protection features

Disadvantages

  • Limited current handling capacity
  • Sensitive to temperature variations

Working Principles

The 1PMT4120/TR13 operates by shunting excess current when the input voltage exceeds the breakdown voltage, thereby regulating the output voltage.

Detailed Application Field Plans

This product finds applications in various electronic systems, including: - Power supplies - Battery charging circuits - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the 1PMT4120/TR13 include: - 1N5817 - 1N5822 - 1N4007

Note: The above information provides a comprehensive overview of the 1PMT4120/TR13, covering its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

[Word count: 298]

技術ソリューションにおける 1PMT4120/TR13 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is 1PMT4120/TR13?

    • 1PMT4120/TR13 is a type of transient voltage suppressor diode used to protect electronic circuits from voltage spikes and transients.

  2. Where is 1PMT4120/TR13 commonly used?

    • It is commonly used in various technical solutions such as power supplies, automotive electronics, industrial equipment, and telecommunications systems.

  3. How does 1PMT4120/TR13 work?

    • 1PMT4120/TR13 works by diverting excessive voltage away from sensitive components, thereby protecting them from damage caused by voltage surges.

  4. What are the key specifications of 1PMT4120/TR13?

    • The key specifications include its maximum working voltage, peak pulse current, clamping voltage, and operating temperature range.

  5. What are the benefits of using 1PMT4120/TR13 in technical solutions?

    • The benefits include improved reliability, protection against voltage transients, and increased lifespan of electronic components.

  6. How should 1PMT4120/TR13 be integrated into a circuit?

    • It should be placed in parallel with the circuit being protected, typically across the power supply input or at the input/output of sensitive components.

  7. What are the potential drawbacks of using 1PMT4120/TR13?

    • One potential drawback is that it may introduce some level of signal distortion or attenuation, especially if not properly selected for the application.

  8. Are there any alternatives to 1PMT4120/TR13 for transient voltage suppression?

    • Yes, other alternatives include metal oxide varistors (MOVs), gas discharge tubes (GDTs), and silicon avalanche diodes (SADs).

  9. How can the effectiveness of 1PMT4120/TR13 be tested in a technical solution?

    • Its effectiveness can be tested by subjecting the circuit to voltage transients and measuring the response of the diode in terms of clamping voltage and peak pulse current.

  10. What are some best practices for selecting and using 1PMT4120/TR13 in technical solutions?

    • Best practices include carefully matching the diode's specifications to the application, ensuring proper PCB layout for low inductance, and considering thermal management to prevent overheating during transient events.