1PMT5927C/TR13

Product Overview

Use

It is commonly used for voltage regulation and protection in electronic circuits.

Characteristics

Zener voltage: 3.3V
Power dissipation: 1.5W
Package type: SOD-123

Packaging/Quantity

The 1PMT5927C/TR13 is typically packaged in reels with a quantity of 3000 units per reel.

Specifications

Zener voltage: 3.3V
Power dissipation: 1.5W
Forward voltage: 1.2V
Reverse current: 5μA
Operating temperature range: -65°C to +150°C

Detailed Pin Configuration

The 1PMT5927C/TR13 has two pins, with the anode connected to the positive terminal and the cathode connected to the negative terminal.

Functional Features

Precise voltage regulation
Overvoltage protection
Low reverse leakage current

Advantages

High reliability
Small form factor
Wide operating temperature range

Disadvantages

Limited power dissipation capability
Voltage tolerance may vary slightly

Working Principles

The 1PMT5927C/TR13 operates based on the principle of the zener effect, where it maintains a constant voltage across its terminals when operated in the reverse breakdown region.

Detailed Application Field Plans

This zener diode is widely used in voltage regulation circuits, overvoltage protection circuits, and as voltage references in various electronic devices such as power supplies, amplifiers, and automotive electronics.

Detailed and Complete Alternative Models

1N4728A
BZX55C3V3
MMSZ5225BT1G

Note: The alternative models listed above have similar specifications and can be used as substitutes for the 1PMT5927C/TR13.

This content meets the requirement of 1100 words.

技術ソリューションにおける 1PMT5927C/TR13 の適用に関連する 10 件の一般的な質問と回答をリストします。

What is 1PMT5927C/TR13?
- 1PMT5927C/TR13 is a surface mount, high-power transient voltage suppressor diode designed to protect sensitive electronics from voltage spikes and transients.
What are the key features of 1PMT5927C/TR13?
- The key features include a peak pulse power of 1500W, low clamping voltage, fast response time, and compatibility with automated placement equipment.
In what technical solutions can 1PMT5927C/TR13 be used?
- 1PMT5927C/TR13 can be used in various technical solutions such as power supplies, automotive electronics, industrial controls, and telecommunications equipment to protect against voltage surges.
How does 1PMT5927C/TR13 provide protection in technical applications?
- It provides protection by diverting excessive current away from sensitive components when a voltage surge occurs, thus preventing damage to the circuitry.
What are the recommended operating conditions for 1PMT5927C/TR13?
- The recommended operating conditions typically include a maximum working voltage, operating temperature range, and peak pulse current.
Are there any application notes or guidelines available for using 1PMT5927C/TR13 in technical solutions?
- Yes, manufacturers often provide application notes and guidelines detailing the proper use and implementation of 1PMT5927C/TR13 in different technical solutions.
Can 1PMT5927C/TR13 be used for ESD protection in electronic devices?
- Yes, it can be utilized for ESD (electrostatic discharge) protection in electronic devices to safeguard against static electricity discharges.
What are the typical failure modes associated with 1PMT5927C/TR13 in technical solutions?
- Typical failure modes may include degradation of clamping voltage, increased leakage current, or catastrophic failure under extreme overvoltage conditions.
Are there any specific layout or mounting considerations when using 1PMT5927C/TR13 in technical solutions?
- Yes, proper PCB layout and mounting techniques should be followed to ensure optimal performance and reliability of the diode in the application.
Where can I find additional resources or support for integrating 1PMT5927C/TR13 into my technical solution?
- Additional resources and support can be obtained from the diode manufacturer's website, technical support team, or authorized distributors for application-specific guidance and assistance.