1PMT5933BE3/TR13
Product Overview
Category
The 1PMT5933BE3/TR13 belongs to the category of Zener diodes.
Use
It is primarily used for voltage regulation and transient suppression in electronic circuits.
Characteristics
- Zener voltage: 3.3V
- Power dissipation: 1.5W
- Package type: SOD-123
Packaging/Quantity
The 1PMT5933BE3/TR13 is typically available in reels with a quantity of 3000 units per reel.
Specifications
- Zener Voltage: 3.3V
- Power Dissipation: 1.5W
- Forward Voltage: 1.2V
- Reverse Current: 5µA
- Operating Temperature Range: -65°C to +150°C
Detailed Pin Configuration
The 1PMT5933BE3/TR13 has two pins, with the anode connected to the positive terminal and the cathode connected to the negative terminal.
Functional Features
- Precise voltage regulation
- Transient suppression
- Low reverse leakage current
Advantages
- High reliability
- Small form factor
- Wide operating temperature range
Disadvantages
- Limited power dissipation capability
- Sensitive to temperature variations
Working Principles
The 1PMT5933BE3/TR13 operates based on the Zener effect, where it maintains a constant voltage across its terminals when reverse-biased.
Detailed Application Field Plans
This Zener diode is commonly used in voltage regulator circuits, overvoltage protection circuits, and as a reference voltage source in various electronic devices.
Detailed and Complete Alternative Models
Some alternative models to the 1PMT5933BE3/TR13 include: - 1N5226B - BZX84C3V3 - MMSZ5232B
In conclusion, the 1PMT5933BE3/TR13 Zener diode is a reliable component used for voltage regulation and transient suppression in various electronic applications. Its precise characteristics and compact package make it suitable for a wide range of circuit designs.
Word Count: 298
技術ソリューションにおける 1PMT5933BE3/TR13 の適用に関連する 10 件の一般的な質問と回答をリストします。
What is 1PMT5933BE3/TR13 used for in technical solutions?
- 1PMT5933BE3/TR13 is commonly used as a transient voltage suppressor diode to protect sensitive electronic components from voltage spikes and transients.
How does 1PMT5933BE3/TR13 work in technical solutions?
- 1PMT5933BE3/TR13 works by diverting excessive voltage away from sensitive components, thereby preventing damage due to transient voltage events.
What are the key specifications of 1PMT5933BE3/TR13?
- The key specifications include its breakdown voltage, maximum clamping voltage, peak pulse current capability, and package type.
In what applications is 1PMT5933BE3/TR13 commonly used?
- It is commonly used in power supplies, communication equipment, automotive electronics, and industrial control systems to protect against voltage surges.
What are the advantages of using 1PMT5933BE3/TR13 in technical solutions?
- The advantages include its ability to provide robust transient voltage protection, low clamping voltage, fast response time, and compact size.
How should 1PMT5933BE3/TR13 be integrated into a technical solution?
- It should be placed in parallel with the protected circuit, ensuring that it can quickly shunt excess voltage to ground when necessary.
What are the temperature and environmental considerations for 1PMT5933BE3/TR13?
- It is important to consider the operating temperature range and any environmental factors such as humidity or exposure to chemicals that may affect its performance.
Are there any limitations or constraints when using 1PMT5933BE3/TR13 in technical solutions?
- One limitation is that it may not be suitable for extremely high-power or high-frequency applications, so careful consideration of the specific requirements is necessary.
How can 1PMT5933BE3/TR13 be tested for its effectiveness in a technical solution?
- Testing can be performed using transient voltage surge suppression (TVSS) testing methods to verify its clamping performance and response to voltage spikes.
Where can 1PMT5933BE3/TR13 be sourced for use in technical solutions?
- It can be sourced from reputable electronic component distributors, manufacturers, or authorized resellers to ensure its authenticity and quality.