Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
JAN1N4109DUR-1
詳細を表示 DataSheets

JAN1N4109DUR-1

Product Category

The JAN1N4109DUR-1 belongs to the category of semiconductor devices, specifically a Zener diode.

Basic Information Overview

  • Use: The JAN1N4109DUR-1 is used as a voltage regulator in electronic circuits.
  • Characteristics: It has a precise breakdown voltage and low dynamic impedance.
  • Package: The device is typically available in a DO-41 package.
  • Essence: The essence of the JAN1N4109DUR-1 lies in its ability to maintain a constant voltage across its terminals.
  • Packaging/Quantity: It is commonly packaged in reels or tubes with varying quantities depending on the manufacturer.

Specifications

  • Voltage Range: 4.3V to 75V
  • Power Dissipation: 1.0W
  • Operating Temperature: -65°C to +200°C
  • Zener Impedance: 5Ω maximum at 10mA

Detailed Pin Configuration

The JAN1N4109DUR-1 typically has two pins, anode, and cathode, with the anode being the positive terminal and the cathode being the negative terminal.

Functional Features

  • Precise voltage regulation
  • Low dynamic impedance
  • High reliability

Advantages and Disadvantages

Advantages

  • Provides stable voltage regulation
  • Low cost
  • Wide range of voltage options available

Disadvantages

  • Limited power dissipation capability
  • Susceptible to damage from excessive current or voltage spikes

Working Principles

The JAN1N4109DUR-1 operates based on the principle of the Zener effect, where it maintains a nearly constant voltage across its terminals when reverse-biased at the specified breakdown voltage.

Detailed Application Field Plans

The JAN1N4109DUR-1 finds applications in various electronic circuits such as voltage regulators, overvoltage protection, and signal clamping.

Detailed and Complete Alternative Models

Some alternative models to the JAN1N4109DUR-1 include: - 1N4728A - BZX55C4V7 - 1N5226B

In conclusion, the JAN1N4109DUR-1 Zener diode serves as a crucial component in electronic circuits, providing stable voltage regulation and finding applications in diverse fields due to its reliable performance and cost-effectiveness.

Word count: 313

技術ソリューションにおける JAN1N4109DUR-1 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the voltage rating of JAN1N4109DUR-1?

    • The voltage rating of JAN1N4109DUR-1 is 100 volts.

  2. What is the current rating of JAN1N4109DUR-1?

    • The current rating of JAN1N4109DUR-1 is 1 ampere.

  3. What type of diode is JAN1N4109DUR-1?

    • JAN1N4109DUR-1 is a silicon rectifier diode.

  4. What are the typical applications of JAN1N4109DUR-1?

    • JAN1N4109DUR-1 is commonly used in power supply circuits, voltage regulation, and general-purpose rectification.

  5. What is the forward voltage drop of JAN1N4109DUR-1?

    • The forward voltage drop of JAN1N4109DUR-1 is typically around 0.7 volts at the rated current.

  6. Is JAN1N4109DUR-1 suitable for high-frequency applications?

    • No, JAN1N4109DUR-1 is not recommended for high-frequency applications due to its relatively slow recovery time.

  7. Can JAN1N4109DUR-1 be used in reverse-biased mode?

    • Yes, JAN1N4109DUR-1 can handle reverse-biased operation within its specified voltage limits.

  8. What is the temperature range for JAN1N4109DUR-1?

    • JAN1N4109DUR-1 is typically rated for operation within a temperature range of -65°C to 175°C.

  9. Does JAN1N4109DUR-1 require a heat sink for certain applications?

    • Depending on the specific application and power dissipation, a heat sink may be required to ensure proper thermal management.

  10. Are there any common failure modes associated with JAN1N4109DUR-1?

    • Common failure modes for JAN1N4109DUR-1 include overvoltage stress, excessive current, and thermal overstress, so proper design considerations should be taken into account to mitigate these risks.