JAN1N963B-1
Product Overview
Category
The JAN1N963B-1 belongs to the category of semiconductor devices, specifically a diode.
Use
It is commonly used in electronic circuits for rectification and voltage regulation.
Characteristics
- Forward voltage drop: 0.7V
- Maximum reverse voltage: 200V
- Maximum forward current: 1A
- Fast switching speed
Package
The JAN1N963B-1 is typically available in a DO-41 package.
Essence
This diode is essential for converting alternating current (AC) to direct current (DC) and for protecting circuits from reverse voltage.
Packaging/Quantity
It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Forward Voltage Drop: 0.7V
- Reverse Voltage: 200V
- Forward Current: 1A
- Package Type: DO-41
- Operating Temperature Range: -65°C to 175°C
Detailed Pin Configuration
The JAN1N963B-1 diode has two pins, an anode, and a cathode. The anode is connected to the positive terminal of the circuit, while the cathode is connected to the negative terminal.
Functional Features
- Efficient rectification of AC to DC
- Fast switching speed for rapid response in circuits
- Reliable voltage regulation
Advantages
- Low forward voltage drop
- High maximum reverse voltage
- Fast switching speed
Disadvantages
- Limited maximum forward current compared to some other diodes
- Sensitive to temperature variations
Working Principles
The JAN1N963B-1 operates based on the principle of creating a one-way flow of current when it is forward-biased, allowing current to pass through, and blocking the flow of current when reverse-biased.
Detailed Application Field Plans
This diode is widely used in power supplies, battery chargers, voltage regulators, and various electronic circuits where efficient rectification and voltage regulation are required.
Detailed and Complete Alternative Models
- 1N4001
- 1N4004
- 1N5408
- 1N5819
- 1N4148
In conclusion, the JAN1N963B-1 diode is a crucial component in electronic circuits, providing efficient rectification and voltage regulation. Its characteristics, working principles, and application field plans make it a valuable asset in various electronic applications.
[Word Count: 328]
技術ソリューションにおける JAN1N963B-1 の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure, here are 10 common questions and answers related to the application of JAN1N963B-1 in technical solutions:
What is the voltage rating of JAN1N963B-1?
- The voltage rating of JAN1N963B-1 is 100V.
What is the maximum current rating of JAN1N963B-1?
- The maximum current rating of JAN1N963B-1 is 500mA.
What type of diode is JAN1N963B-1?
- JAN1N963B-1 is a silicon power rectifier diode.
What are the typical applications of JAN1N963B-1?
- Typical applications of JAN1N963B-1 include power supplies, inverters, and general rectification circuits.
What is the forward voltage drop of JAN1N963B-1 at its rated current?
- The forward voltage drop of JAN1N963B-1 at its rated current is typically around 1V.
Is JAN1N963B-1 suitable for high-frequency applications?
- No, JAN1N963B-1 is not suitable for high-frequency applications due to its relatively slow recovery time.
Can JAN1N963B-1 be used in reverse-biased mode?
- Yes, JAN1N963B-1 can be used in reverse-biased mode, but it is important to stay within its reverse voltage limit.
What is the temperature range for operation of JAN1N963B-1?
- The temperature range for operation of JAN1N963B-1 is typically -65°C to +175°C.
Does JAN1N963B-1 require a heatsink for certain applications?
- Yes, for high-power applications, JAN1N963B-1 may require a heatsink to dissipate heat effectively.
Is JAN1N963B-1 RoHS compliant?
- Yes, JAN1N963B-1 is RoHS compliant, meaning it meets the Restriction of Hazardous Substances directive's requirements.
I hope these questions and answers are helpful! Let me know if you need further assistance.