JANTX1N4460C
Product Overview
Category
The JANTX1N4460C belongs to the category of semiconductor diodes.
Use
It is commonly used in electronic circuits for rectification and voltage regulation.
Characteristics
- High current capability
- Low forward voltage drop
- Fast switching speed
Package
The JANTX1N4460C is typically available in a DO-35 package.
Essence
This diode is essential for converting alternating current (AC) to direct current (DC) and for protecting circuits from voltage spikes.
Packaging/Quantity
It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Maximum Average Forward Current: 1A
- Peak Repetitive Reverse Voltage: 100V
- Forward Voltage Drop: 1V at 1A
- Reverse Recovery Time: 4ns
Detailed Pin Configuration
The JANTX1N4460C has two pins, with the anode connected to the positive terminal and the cathode connected to the negative terminal.
Functional Features
- Efficient rectification of AC to DC
- Reliable voltage regulation
- Fast response time to voltage changes
Advantages and Disadvantages
Advantages
- High current capability
- Low forward voltage drop
- Fast switching speed
Disadvantages
- Limited reverse voltage tolerance
- Sensitive to temperature variations
Working Principles
The JANTX1N4460C operates based on the principle of creating a one-way flow of current when forward-biased and blocking the flow of current when reverse-biased.
Detailed Application Field Plans
The JANTX1N4460C is widely used in: - Power supply units - Voltage regulators - Signal demodulation circuits - Overvoltage protection circuits
Detailed and Complete Alternative Models
Some alternative models to the JANTX1N4460C include: - 1N4001 - 1N4148 - 1N5408 - 1N5819
In conclusion, the JANTX1N4460C is a versatile semiconductor diode with high current capability and fast switching speed, making it suitable for various applications in electronic circuits.
[Word count: 313]
技術ソリューションにおける JANTX1N4460C の適用に関連する 10 件の一般的な質問と回答をリストします。
What is the JANTX1N4460C diode used for?
- The JANTX1N4460C diode is commonly used for voltage regulation, surge protection, and rectification in various technical solutions.
What are the key specifications of the JANTX1N4460C diode?
- The JANTX1N4460C diode is a 500mW Zener diode with a voltage range from 3.3V to 100V and a tolerance of ±5%.
How does the JANTX1N4460C diode provide surge protection?
- The JANTX1N4460C diode can clamp transient overvoltages by diverting excessive current away from sensitive components, thus protecting them from damage.
In what applications is the JANTX1N4460C diode commonly used?
- The JANTX1N4460C diode is frequently used in power supplies, voltage regulators, instrumentation, and automotive electronics.
What is the maximum power dissipation of the JANTX1N4460C diode?
- The JANTX1N4460C diode has a maximum power dissipation of 500mW.
Can the JANTX1N4460C diode be used for precision voltage references?
- Yes, the JANTX1N4460C diode can be utilized as a stable voltage reference due to its well-defined breakdown voltage.
Does the JANTX1N4460C diode require heat sinking in high-power applications?
- Yes, in high-power applications, it is recommended to use proper heat sinking to ensure the JANTX1N4460C diode operates within its specified temperature limits.
What is the temperature coefficient of the JANTX1N4460C diode?
- The JANTX1N4460C diode typically has a temperature coefficient of approximately 0.05% per °C.
Is the JANTX1N4460C diode suitable for military and aerospace applications?
- Yes, the JANTX1N4460C diode is designed to meet stringent military and aerospace standards, making it suitable for these applications.
Are there any precautions to consider when using the JANTX1N4460C diode?
- It is important to observe proper handling procedures, avoid exceeding the maximum ratings, and adhere to recommended operating conditions to ensure reliable performance of the JANTX1N4460C diode.