Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
JANTXV1N3825D-1
詳細を表示 DataSheets

JANTXV1N3825D-1 Encyclopedia Entry

Product Overview

Category

The JANTXV1N3825D-1 belongs to the category of semiconductor devices, specifically a diode.

Use

It is commonly used in electronic circuits for rectification and voltage regulation.

Characteristics

  • High current capability
  • Low forward voltage drop
  • Fast switching speed

Package

The JANTXV1N3825D-1 is typically available in a DO-13 package.

Essence

This diode is essential for converting alternating current (AC) to direct current (DC) and for voltage regulation in various electronic applications.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Forward Voltage: 1.1V
  • Reverse Voltage: 200V
  • Forward Current: 3A
  • Reverse Recovery Time: 50ns

Detailed Pin Configuration

The JANTXV1N3825D-1 diode has two pins, an anode and a cathode. The anode is typically marked with a band or other indicator.

Functional Features

  • Efficient rectification of AC to DC
  • Fast switching speed for rapid response in electronic circuits
  • Low forward voltage drop for minimal power loss

Advantages

  • High current capability
  • Low forward voltage drop
  • Fast recovery time

Disadvantages

  • Limited reverse voltage tolerance compared to some other diode types
  • Sensitive to temperature variations

Working Principles

The JANTXV1N3825D-1 operates based on the principle of unidirectional conduction, allowing current to flow in one direction while blocking it in the reverse direction. When forward-biased, it conducts current with minimal voltage drop, making it suitable for rectification and voltage regulation.

Detailed Application Field Plans

The JANTXV1N3825D-1 is widely used in: - Power supply units - Voltage regulators - Rectifier circuits - Switching power supplies - Electronic equipment requiring efficient AC to DC conversion

Detailed and Complete Alternative Models

  • 1N4004
  • 1N5408
  • FR107
  • UF4007

In conclusion, the JANTXV1N3825D-1 diode is a crucial component in electronic circuits, offering efficient rectification and voltage regulation capabilities. Its high current capability and fast switching speed make it suitable for a wide range of applications, despite its limitations in reverse voltage tolerance and sensitivity to temperature variations.

[Word Count: 386]

技術ソリューションにおける JANTXV1N3825D-1 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the JANTXV1N3825D-1 diode used for?

    • The JANTXV1N3825D-1 diode is commonly used as a voltage regulator or surge suppressor in various technical solutions.

  2. What are the key specifications of the JANTXV1N3825D-1 diode?

    • The JANTXV1N3825D-1 diode typically has a maximum repetitive reverse voltage of 150V, a forward current of 3A, and a low forward voltage drop.

  3. How does the JANTXV1N3825D-1 diode protect against voltage surges?

    • The JANTXV1N3825D-1 diode can clamp excessive voltage spikes by conducting when the voltage exceeds its breakdown voltage, thereby protecting sensitive components in a circuit.

  4. Can the JANTXV1N3825D-1 diode be used in high-temperature environments?

    • Yes, the JANTXV1N3825D-1 diode is designed to operate reliably in high-temperature environments, making it suitable for various industrial applications.

  5. What are some common applications of the JANTXV1N3825D-1 diode?

    • The JANTXV1N3825D-1 diode is often used in power supplies, motor drives, automotive electronics, and other systems requiring voltage regulation and transient protection.

  6. Does the JANTXV1N3825D-1 diode require any special heat dissipation measures?

    • Depending on the application and operating conditions, proper heat sinking may be necessary to ensure the JANTXV1N3825D-1 diode operates within its specified temperature range.

  7. What are the typical failure modes of the JANTXV1N3825D-1 diode?

    • The JANTXV1N3825D-1 diode may fail due to excessive current, voltage spikes, or prolonged exposure to high temperatures, so proper circuit protection and thermal management are important.

  8. Is the JANTXV1N3825D-1 diode suitable for use in aerospace and defense applications?

    • Yes, the JANTXV1N3825D-1 diode is specifically designed to meet the stringent requirements of aerospace and defense applications, including high reliability and performance under harsh conditions.

  9. Can multiple JANTXV1N3825D-1 diodes be connected in parallel for higher current handling?

    • Yes, multiple JANTXV1N3825D-1 diodes can be connected in parallel to increase the overall current-handling capability while ensuring proper current sharing among the diodes.

  10. Are there any recommended test procedures for verifying the performance of the JANTXV1N3825D-1 diode in a technical solution?

    • Standard diode testing methods, such as forward voltage drop measurement, reverse leakage current measurement, and transient voltage suppression testing, can be used to verify the performance of the JANTXV1N3825D-1 diode in a given application.