Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MA1.5KE62A
詳細を表示 DataSheets

MA1.5KE62A

Product Overview

Category

The MA1.5KE62A belongs to the category of transient voltage suppressor (TVS) diodes.

Use

It is primarily used for surge protection in electronic circuits and systems.

Characteristics

  • High surge capability
  • Fast response time
  • Low clamping voltage
  • RoHS compliant

Package

The MA1.5KE62A is available in a DO-201 package.

Essence

This TVS diode is essential for protecting sensitive electronic components from voltage transients and surges.

Packaging/Quantity

The MA1.5KE62A is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Peak Pulse Power: 1500W
  • Breakdown Voltage: 53.3V
  • Maximum Clamping Voltage: 86.5V
  • Operating Temperature Range: -55°C to 175°C
  • Reverse Standoff Voltage: 47.8V

Detailed Pin Configuration

The MA1.5KE62A TVS diode has a standard two-pin configuration, with one pin designated for anode and the other for cathode.

Functional Features

  • Provides protection against voltage transients and surges
  • Rapid response to overvoltage events
  • Low leakage current
  • High reliability and durability

Advantages and Disadvantages

Advantages

  • High surge capability
  • Fast response time
  • RoHS compliant
  • Wide operating temperature range

Disadvantages

  • May require additional circuitry for comprehensive surge protection in complex systems
  • Sensitive to reverse bias conditions if not properly implemented

Working Principles

The MA1.5KE62A operates by diverting excessive voltage transients away from sensitive components, thereby limiting the voltage across the protected circuit.

Detailed Application Field Plans

The MA1.5KE62A is commonly used in various applications including: - Power supplies - Telecommunication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • SMAJ58A: Similar TVS diode with lower peak pulse power
  • P6KE68A: TVS diode with higher breakdown voltage
  • 1.5KE75A: TVS diode with higher clamping voltage

In conclusion, the MA1.5KE62A TVS diode offers robust surge protection capabilities and is widely used in diverse electronic applications due to its high surge capability, fast response time, and RoHS compliance. However, it may require additional circuitry for comprehensive surge protection in complex systems and should be carefully implemented to avoid reverse bias conditions. Its working principle involves diverting excessive voltage transients away from sensitive components, making it an essential component for safeguarding electronic circuits and systems.

技術ソリューションにおける MA1.5KE62A の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum peak pulse power of MA1.5KE62A?

    • The maximum peak pulse power of MA1.5KE62A is 1500 watts.

  2. What is the breakdown voltage of MA1.5KE62A?

    • The breakdown voltage of MA1.5KE62A is typically 68.9 volts.

  3. What are the typical applications of MA1.5KE62A in technical solutions?

    • MA1.5KE62A is commonly used for transient voltage suppression in various electronic equipment, such as power supplies, telecommunications equipment, and industrial controls.

  4. What is the clamping voltage of MA1.5KE62A?

    • The clamping voltage of MA1.5KE62A is typically 87.1 volts at a peak pulse current of 100A.

  5. What is the operating temperature range of MA1.5KE62A?

    • MA1.5KE62A can operate within a temperature range of -55°C to +175°C.

  6. Is MA1.5KE62A RoHS compliant?

    • Yes, MA1.5KE62A is RoHS compliant, making it suitable for use in environmentally sensitive applications.

  7. What is the packaging type available for MA1.5KE62A?

    • MA1.5KE62A is available in a variety of packaging options, including DO-201, DO-201AD, and R-6.

  8. What is the reverse stand-off voltage of MA1.5KE62A?

    • The reverse stand-off voltage of MA1.5KE62A is 62 volts.

  9. Does MA1.5KE62A have surge capability?

    • Yes, MA1.5KE62A has excellent surge capability, making it suitable for protecting sensitive electronic components from voltage transients.

  10. Can MA1.5KE62A be used for overvoltage protection in automotive electronics?

    • Yes, MA1.5KE62A is often used for overvoltage protection in automotive electronics due to its high power handling capability and reliability.

Please let me know if you need further assistance with MA1.5KE62A or related technical solutions.