Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAPLAD30KP58A
詳細を表示 DataSheets

MAPLAD30KP58A

Introduction

The MAPLAD30KP58A is a high-power transient voltage suppressor (TVS) diode designed to protect electronic circuits from overvoltage events. This entry provides an overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protection against overvoltage events in electronic circuits
  • Characteristics: High power handling capability, fast response time, low clamping voltage
  • Package: Axial leaded package
  • Essence: Safeguarding sensitive electronic components from voltage transients
  • Packaging/Quantity: Typically available in reels or bulk packaging

Specifications

  • Peak Pulse Power: 30000 W
  • Standoff Voltage: 58 V
  • Breakdown Voltage: 64.4 V to 71.2 V
  • Maximum Clamping Voltage: 93.6 V at 100 A
  • Operating Temperature Range: -55°C to 175°C
  • Storage Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The MAPLAD30KP58A typically features an axial leaded package with two leads. The pin configuration includes: 1. Anode 2. Cathode

Functional Features

  • Ultra-fast response time
  • High surge capability
  • Low incremental surge resistance
  • RoHS compliant

Advantages and Disadvantages

Advantages

  • Excellent protection against voltage transients
  • High power handling capability
  • RoHS compliant
  • Wide operating temperature range

Disadvantages

  • Relatively large package size
  • Higher cost compared to standard TVS diodes

Working Principles

The MAPLAD30KP58A operates by diverting excessive transient currents away from sensitive electronic components, thereby limiting the voltage across the protected circuit. When a transient voltage event occurs, the diode rapidly switches into its low impedance state, effectively shunting the excess energy to ground.

Detailed Application Field Plans

The MAPLAD30KP58A is commonly used in various applications, including: - Power supply units - Industrial equipment - Automotive electronics - Telecommunication systems - Renewable energy systems

Detailed and Complete Alternative Models

  • MAPLAD30KP36A: Standoff Voltage 36 V, Peak Pulse Power 30000 W
  • MAPLAD30KP48A: Standoff Voltage 48 V, Peak Pulse Power 30000 W
  • MAPLAD30KP70A: Standoff Voltage 70 V, Peak Pulse Power 30000 W
  • MAPLAD30KP90A: Standoff Voltage 90 V, Peak Pulse Power 30000 W

In conclusion, the MAPLAD30KP58A is a robust transient voltage suppressor diode offering high power handling capabilities and fast response times. Its application spans across various industries, providing reliable protection against overvoltage events.

Word Count: 410

技術ソリューションにおける MAPLAD30KP58A の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is MAPLAD30KP58A?

    • MAPLAD30KP58A is a high-power transient voltage suppressor diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

  2. What is the maximum peak pulse power of MAPLAD30KP58A?

    • The maximum peak pulse power of MAPLAD30KP58A is 30000 watts.

  3. What is the breakdown voltage of MAPLAD30KP58A?

    • The breakdown voltage of MAPLAD30KP58A is 58 volts.

  4. What are the typical applications of MAPLAD30KP58A?

    • MAPLAD30KP58A is commonly used in surge protection for telecommunications equipment, power supplies, industrial controls, and other sensitive electronic devices.

  5. What is the response time of MAPLAD30KP58A?

    • The response time of MAPLAD30KP58A is very fast, typically in the nanosecond range, providing quick protection against transient voltage spikes.

  6. Is MAPLAD30KP58A suitable for outdoor applications?

    • Yes, MAPLAD30KP58A is suitable for outdoor applications due to its ability to withstand high-energy transients such as lightning strikes.

  7. What is the operating temperature range of MAPLAD30KP58A?

    • MAPLAD30KP58A has an operating temperature range of -55°C to +175°C, making it suitable for a wide range of environmental conditions.

  8. Does MAPLAD30KP58A require additional heat sinking?

    • Depending on the application and power dissipation, MAPLAD30KP58A may require additional heat sinking to ensure proper thermal management.

  9. Can MAPLAD30KP58A be used in series or parallel configurations?

    • Yes, MAPLAD30KP58A can be used in both series and parallel configurations to achieve the desired voltage clamping and power handling capabilities.

  10. Are there any specific PCB layout considerations for using MAPLAD30KP58A?

    • It is recommended to minimize the length and impedance of the traces connecting MAPLAD30KP58A to the circuit to reduce inductance and ensure optimal performance. Additionally, proper grounding and layout techniques should be followed to maximize the effectiveness of the device.