Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAPLAD36KP130AE3
詳細を表示 DataSheets

MAPLAD36KP130AE3

Introduction

The MAPLAD36KP130AE3 is a high-power transient voltage suppressor (TVS) diode designed to protect electronic circuits from overvoltage events. This entry provides an overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Overview

  • Category: Electronic Component
  • Use: Protection against overvoltage events in electronic circuits
  • Characteristics: High-power, transient voltage suppression
  • Package: SMD (Surface Mount Device)
  • Essence: Protecting electronic circuits from voltage spikes
  • Packaging/Quantity: Available in reels or bulk packaging

Specifications

  • Voltage Rating: 130V
  • Peak Pulse Power: 36kW
  • Operating Temperature Range: -55°C to +175°C
  • Mounting Type: Surface Mount
  • Package / Case: DO-203AB, SMC

Detailed Pin Configuration

The MAPLAD36KP130AE3 TVS diode has a standard SMC package with two pins for surface mounting onto PCBs.

Functional Features

  • Transient Voltage Suppression: Provides protection against voltage transients and surges.
  • Fast Response Time: Rapidly clamps voltage spikes to safe levels.
  • High Power Handling Capacity: Capable of dissipating large amounts of energy during transient events.

Advantages

  • Reliable Protection: Safeguards sensitive electronic components from voltage surges.
  • Compact Design: Suitable for space-constrained applications.
  • Wide Operating Temperature Range: Can function in extreme environmental conditions.

Disadvantages

  • Limited Peak Power Handling: May not be suitable for extremely high-energy transient events.
  • Sensitivity to Reverse Voltage: Care must be taken to ensure proper polarity during installation.

Working Principles

The MAPLAD36KP130AE3 operates by diverting excess transient voltage away from the protected circuit, thereby preventing damage to sensitive components. When a voltage surge occurs, the TVS diode rapidly conducts, shunting the excess energy to ground and limiting the voltage across the protected circuit.

Detailed Application Field Plans

  • Industrial Electronics: Used in power supplies, motor drives, and control systems.
  • Telecommunications: Protects communication equipment from lightning-induced surges.
  • Automotive Electronics: Safeguards vehicle electronics from voltage transients.

Detailed and Complete Alternative Models

  1. MAPLAD36KP150AE3: Similar TVS diode with a higher voltage rating of 150V.
  2. MAPLAD36KP110AE3: TVS diode with a lower voltage rating of 110V for less demanding applications.

In conclusion, the MAPLAD36KP130AE3 TVS diode offers reliable protection against overvoltage events in various electronic applications, making it an essential component for ensuring the longevity and reliability of electronic systems.

[Word Count: 409]

技術ソリューションにおける MAPLAD36KP130AE3 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is MAPLAD36KP130AE3?

    • MAPLAD36KP130AE3 is a high-power, high-reliability silicon carbide (SiC) Schottky diode designed for use in power electronics applications.

  2. What are the key features of MAPLAD36KP130AE3?

    • The key features include a high surge capability, low forward voltage drop, fast switching speed, and high temperature operation.

  3. What are the typical applications of MAPLAD36KP130AE3?

    • Typical applications include power factor correction (PFC), solar inverters, motor drives, and other high-power electronic systems.

  4. What is the maximum operating temperature of MAPLAD36KP130AE3?

    • The maximum operating temperature is typically 175°C.

  5. What is the reverse recovery time of MAPLAD36KP130AE3?

    • The reverse recovery time is typically very fast, in the range of nanoseconds.

  6. What is the forward voltage drop of MAPLAD36KP130AE3?

    • The forward voltage drop is typically low, which helps to minimize power losses in the application.

  7. Does MAPLAD36KP130AE3 require any special cooling or heatsinking?

    • Yes, due to its high-power capabilities, proper cooling or heatsinking is recommended to ensure optimal performance and reliability.

  8. Is MAPLAD36KP130AE3 suitable for automotive applications?

    • Yes, it can be used in automotive applications where high-power and high-temperature operation are required.

  9. What are the packaging options available for MAPLAD36KP130AE3?

    • MAPLAD36KP130AE3 is typically available in industry-standard packages such as TO-247 or D2PAK.

  10. Are there any specific design considerations when using MAPLAD36KP130AE3 in technical solutions?

    • Designers should consider factors such as thermal management, voltage and current ratings, and protection circuitry to ensure reliable and efficient operation in their specific technical solutions.