Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAPLAD6.5KP75CAE3
詳細を表示 DataSheets

MAPLAD6.5KP75CAE3

1. Introduction

The MAPLAD6.5KP75CAE3 belongs to the category of transient voltage suppressor (TVS) diodes and is commonly used for surge protection in electronic circuits. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the MAPLAD6.5KP75CAE3.

2. Basic Information Overview

  • Category: Transient Voltage Suppressor (TVS) Diode
  • Use: Surge protection in electronic circuits
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: DO-201AD
  • Essence: Provides protection against transient voltage spikes
  • Packaging/Quantity: Available in reels with varying quantities

3. Specifications

  • Voltage Rating: 75V
  • Power Dissipation: 6.5kW
  • Breakdown Voltage: 83.3V
  • Maximum Clamping Voltage: 121V
  • Peak Pulse Current: 104A
  • Operating Temperature Range: -55°C to +175°C

4. Detailed Pin Configuration

The MAPLAD6.5KP75CAE3 TVS diode has a standard DO-201AD package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

5. Functional Features

  • Fast response time to transient voltage spikes
  • Low clamping voltage to protect sensitive electronic components
  • High surge capability for reliable surge protection

6. Advantages and Disadvantages

Advantages

  • Effective surge protection for electronic circuits
  • Fast response time ensures minimal impact on the protected circuit
  • Low clamping voltage prevents damage to sensitive components

Disadvantages

  • Higher cost compared to traditional diodes
  • Requires careful consideration of placement and routing in circuit design

7. Working Principles

When a transient voltage spike occurs, the MAPLAD6.5KP75CAE3 TVS diode conducts and diverts the excess current away from the protected circuit, thereby limiting the voltage across the circuit to a safe level. This rapid response protects sensitive components from damage due to voltage surges.

8. Detailed Application Field Plans

The MAPLAD6.5KP75CAE3 is commonly used in various applications including: - Power supply units - Communication equipment - Industrial control systems - Automotive electronics - Consumer electronics

9. Detailed and Complete Alternative Models

Some alternative models to the MAPLAD6.5KP75CAE3 TVS diode include: - SMAJ75A - P6KE75CA - 1.5KE75A - SMCJ75A

In conclusion, the MAPLAD6.5KP75CAE3 TVS diode offers robust surge protection for electronic circuits, with its high surge capability, low clamping voltage, and fast response time making it suitable for a wide range of applications.

[Word Count: 410]

技術ソリューションにおける MAPLAD6.5KP75CAE3 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is MAPLAD6.5KP75CAE3?

    • MAPLAD6.5KP75CAE3 is a high-power transient voltage suppressor diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

  2. What are the key features of MAPLAD6.5KP75CAE3?

    • The key features include a high peak pulse power dissipation, low clamping voltage, fast response time, and a compact package for easy integration into circuit designs.

  3. How does MAPLAD6.5KP75CAE3 protect electronic equipment?

    • MAPLAD6.5KP75CAE3 provides protection by diverting excessive current away from sensitive components when a transient event occurs, thereby limiting the voltage across the protected device.

  4. In what technical solutions can MAPLAD6.5KP75CAE3 be used?

    • MAPLAD6.5KP75CAE3 can be used in various technical solutions such as power supplies, communication equipment, industrial control systems, and automotive electronics to protect against voltage surges.

  5. What is the maximum clamping voltage of MAPLAD6.5KP75CAE3?

    • The maximum clamping voltage of MAPLAD6.5KP75CAE3 is typically lower than the operating voltage of most electronic devices, ensuring effective protection.

  6. Does MAPLAD6.5KP75CAE3 require any external components for proper operation?

    • MAPLAD6.5KP75CAE3 does not require additional external components for basic operation, but proper PCB layout and consideration of transient current paths are important for optimal performance.

  7. Can MAPLAD6.5KP75CAE3 be used in outdoor applications?

    • Yes, MAPLAD6.5KP75CAE3 is suitable for outdoor applications due to its ability to withstand harsh environmental conditions and provide reliable protection against lightning-induced transients.

  8. What is the typical response time of MAPLAD6.5KP75CAE3?

    • The typical response time of MAPLAD6.5KP75CAE3 is very fast, allowing it to quickly clamp transient voltages and limit the energy delivered to the protected circuit.

  9. Are there any specific thermal considerations when using MAPLAD6.5KP75CAE3?

    • It is important to consider the thermal management of MAPLAD6.5KP75CAE3, especially during prolonged or repetitive transient events, to ensure that the device remains within its specified operating temperature range.

  10. Where can I find detailed application notes for integrating MAPLAD6.5KP75CAE3 into my technical solution?

    • Detailed application notes for MAPLAD6.5KP75CAE3 can be found in the product datasheet, which provides comprehensive guidance on device selection, circuit design, and layout considerations for optimal performance.