Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MBR2090FCTE3/TU

MBR2090FCTE3/TU

Introduction

The MBR2090FCTE3/TU is a high-performance rectifier diode belonging to the category of power semiconductor devices. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Power Semiconductor Devices
  • Use: Rectification in power supply circuits
  • Characteristics: High current-carrying capability, low forward voltage drop
  • Package: TO-220AB
  • Essence: High-efficiency rectification
  • Packaging/Quantity: Tape & Reel, 800 units per reel

Specifications

  • Voltage Rating: 90V
  • Current Rating: 20A
  • Forward Voltage Drop: 0.72V at 10A
  • Reverse Recovery Time: 35ns
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The MBR2090FCTE3/TU follows the standard TO-220AB pin configuration with the following pinout: 1. Anode 2. Cathode

Functional Features

  • High current density capability
  • Low power loss and high efficiency
  • Fast switching speed
  • Soft recovery characteristics

Advantages and Disadvantages

Advantages

  • High current-carrying capability
  • Low forward voltage drop
  • Fast switching speed
  • High efficiency

Disadvantages

  • Higher cost compared to standard diodes
  • Sensitive to temperature variations

Working Principles

The MBR2090FCTE3/TU operates based on the principle of rectification, allowing the flow of current in one direction while blocking it in the reverse direction. It achieves this through the use of a metal-semiconductor junction.

Detailed Application Field Plans

The MBR2090FCTE3/TU is widely used in various applications including: - Switch-mode power supplies - DC-DC converters - Motor drives - Inverters - Battery chargers

Detailed and Complete Alternative Models

Some alternative models to the MBR2090FCTE3/TU include: - MBR20100CT: 100V, 20A rectifier diode - MBR30100PT: 100V, 30A rectifier diode - MBR40250G: 250V, 40A rectifier diode

In conclusion, the MBR2090FCTE3/TU is a high-performance rectifier diode with excellent characteristics suitable for various power supply and conversion applications.

[Word Count: 345]

技術ソリューションにおける MBR2090FCTE3/TU の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is MBR2090FCTE3/TU?

    • MBR2090FCTE3/TU is a high-performance Schottky barrier rectifier designed for use in power supply and other applications.

  2. What are the key features of MBR2090FCTE3/TU?

    • The key features include low forward voltage drop, high current capability, and excellent thermal performance.

  3. What are the typical applications of MBR2090FCTE3/TU?

    • Typical applications include switch mode power supplies, freewheeling diodes, OR-ing diodes, and reverse battery protection.

  4. What is the maximum forward voltage of MBR2090FCTE3/TU?

    • The maximum forward voltage is typically around 0.65V at 20A.

  5. What is the maximum reverse voltage of MBR2090FCTE3/TU?

    • The maximum reverse voltage is 90V.

  6. What is the operating temperature range of MBR2090FCTE3/TU?

    • The operating temperature range is typically from -65°C to +175°C.

  7. What are the packaging options available for MBR2090FCTE3/TU?

    • The device is available in a TO-220AB package.

  8. What are the advantages of using MBR2090FCTE3/TU in power supply applications?

    • The advantages include low power loss, high efficiency, and compact design.

  9. Can MBR2090FCTE3/TU be used in automotive applications?

    • Yes, it can be used in automotive applications such as battery charging systems and DC/DC converters.

  10. Are there any recommended application circuits for MBR2090FCTE3/TU?

    • Yes, the datasheet provides recommended application circuits for various configurations and usage scenarios.