MX1.5KE7.5CAE3 Encyclopedia Entry

Product Overview

Use

It is used to protect sensitive electronic components from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.

Characteristics

High surge capability
Low clamping voltage
Fast response time
Compact package size

Package

The MX1.5KE7.5CAE3 is typically available in a DO-201 package.

Essence

This diode serves as a crucial component in safeguarding electronic circuits from voltage spikes and surges.

Packaging/Quantity

The MX1.5KE7.5CAE3 is commonly packaged in reels or trays, with quantities varying based on manufacturer specifications.

Specifications

Peak Pulse Power: 1500W
Standoff Voltage: 6.4V
Breakdown Voltage: 7.13V
Maximum Clamping Voltage: 11.4V
Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The MX1.5KE7.5CAE3 typically features a two-pin configuration, with the anode and cathode terminals for connection to the circuit.

Functional Features

Transient voltage suppression
Reverse avalanche breakdown protection
Fast response to voltage transients

Advantages and Disadvantages

Advantages

Effective protection against voltage transients
Fast response time
High surge capability

Disadvantages

Clamping voltage may be relatively high for some applications
Sensitive to excessive current and temperature conditions

Working Principles

The MX1.5KE7.5CAE3 operates by diverting excess transient voltage away from sensitive components, thereby limiting the voltage across the protected circuit.

Detailed Application Field Plans

The MX1.5KE7.5CAE3 finds extensive use in various applications, including: - Power supply units - Telecommunication equipment - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the MX1.5KE7.5CAE3 include: - P6KE6.8A - 1.5KE6.8CA - SA5.0A

In conclusion, the MX1.5KE7.5CAE3 transient voltage suppressor diode offers effective protection against voltage transients, making it an essential component in numerous electronic applications.

[Word count: 346]

技術ソリューションにおける MX1.5KE7.5CAE3 の適用に関連する 10 件の一般的な質問と回答をリストします。

What is the voltage rating of MX1.5KE7.5CAE3?
- The voltage rating of MX1.5KE7.5CAE3 is 6.4V.
What is the peak power dissipation of MX1.5KE7.5CAE3?
- The peak power dissipation of MX1.5KE7.5CAE3 is 1500W.
What is the maximum clamping voltage of MX1.5KE7.5CAE3?
- The maximum clamping voltage of MX1.5KE7.5CAE3 is 12.8V.
What are the typical applications for MX1.5KE7.5CAE3?
- MX1.5KE7.5CAE3 is commonly used in surge protection for sensitive electronics, such as telecommunications equipment, industrial control systems, and automotive electronics.
What is the response time of MX1.5KE7.5CAE3?
- The response time of MX1.5KE7.5CAE3 is typically very fast, providing rapid protection against transient voltage spikes.
Does MX1.5KE7.5CAE3 require any additional heat sinking or cooling?
- MX1.5KE7.5CAE3 may require heat sinking or cooling depending on the application and the level of power dissipation expected during transient events.
Is MX1.5KE7.5CAE3 suitable for use in outdoor environments?
- MX1.5KE7.5CAE3 can be used in outdoor environments, but proper encapsulation and protection from moisture and contaminants may be necessary.
What are the environmental operating conditions for MX1.5KE7.5CAE3?
- MX1.5KE7.5CAE3 is designed to operate within a temperature range of -55°C to +175°C.
Can MX1.5KE7.5CAE3 be used in high-frequency applications?
- MX1.5KE7.5CAE3 can be used in high-frequency applications, but its performance at higher frequencies should be carefully evaluated based on the specific requirements of the application.
Are there any recommended test procedures for verifying the performance of MX1.5KE7.5CAE3 in a technical solution?
- Yes, it is recommended to perform surge testing and transient voltage suppression testing to verify the effectiveness of MX1.5KE7.5CAE3 in a given technical solution.