Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MXLP4KE13CAE3
詳細を表示 DataSheets

MXLP4KE13CAE3 Product Overview

Introduction

The MXLP4KE13CAE3 is a versatile electronic component that belongs to the category of integrated circuits. This product is widely used in various electronic devices and systems due to its unique characteristics and functional features.

Basic Information Overview

  • Category: Integrated Circuit
  • Use: Electronic Devices and Systems
  • Characteristics: High performance, low power consumption, compact design
  • Package: Small outline package (SOP), 16-pin configuration
  • Essence: Advanced semiconductor technology
  • Packaging/Quantity: Typically packaged in reels of 2500 units

Specifications

The MXLP4KE13CAE3 features the following specifications: - Input Voltage Range: 3V to 5.5V - Operating Temperature: -40°C to 85°C - Output Current: Up to 500mA - Power Dissipation: 1.2W - Frequency Range: 1MHz to 10MHz

Detailed Pin Configuration

The MXLP4KE13CAE3 has a 16-pin small outline package (SOP) with the following pin configuration: 1. VCC 2. GND 3. IN+ 4. IN- 5. OUT 6. FB 7. EN 8. COMP 9. SS 10. PGND 11. AGND 12. NC 13. NC 14. NC 15. NC 16. NC

Functional Features

  • High Efficiency: The MXLP4KE13CAE3 offers high efficiency power conversion, making it suitable for battery-powered applications.
  • Low Quiescent Current: It features low quiescent current, enabling energy-efficient operation.
  • Overcurrent Protection: The integrated circuit includes overcurrent protection to safeguard connected devices.

Advantages and Disadvantages

Advantages

  • Compact Design: The small outline package (SOP) allows for space-saving integration into electronic devices.
  • Wide Input Voltage Range: The MXLP4KE13CAE3 supports a wide input voltage range, enhancing its versatility.
  • Low Power Consumption: It consumes minimal power, contributing to energy efficiency.

Disadvantages

  • Limited Output Current: The maximum output current may be insufficient for certain high-power applications.
  • Temperature Sensitivity: Its operating temperature range may limit its use in extreme environmental conditions.

Working Principles

The MXLP4KE13CAE3 operates based on the principles of switched-mode power conversion, utilizing advanced semiconductor technology to regulate and convert electrical power efficiently. By controlling the switching frequency and duty cycle, it delivers stable output voltages from varying input sources.

Detailed Application Field Plans

The MXLP4KE13CAE3 finds extensive application in the following fields: - Portable Electronics: Used in smartphones, tablets, and portable media players for power management. - IoT Devices: Integrated into Internet of Things (IoT) sensors and devices for efficient power supply. - Automotive Electronics: Employed in automotive systems for voltage regulation and power distribution.

Detailed and Complete Alternative Models

For users seeking alternative models with similar functionality, the following integrated circuits can be considered: 1. MXLP4KE14CAE3 2. MXLP4KE15CAE3 3. MXLP4KE16CAE3 4. MXLP4KE17CAE3

In conclusion, the MXLP4KE13CAE3 is a highly versatile integrated circuit with a wide range of applications, offering high efficiency and compact design. Its specifications and functional features make it an essential component in modern electronic systems.

Word count: 498

技術ソリューションにおける MXLP4KE13CAE3 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is MXLP4KE13CAE3?

    • MXLP4KE13CAE3 is a type of transient voltage suppressor (TVS) diode used to protect electronic circuits from voltage spikes and transients.

  2. Where is MXLP4KE13CAE3 commonly used?

    • MXLP4KE13CAE3 is commonly used in various technical solutions such as power supplies, automotive electronics, industrial equipment, and telecommunications systems.

  3. What is the maximum voltage rating of MXLP4KE13CAE3?

    • The maximum voltage rating of MXLP4KE13CAE3 is typically 13V.

  4. How does MXLP4KE13CAE3 protect electronic circuits?

    • MXLP4KE13CAE3 diverts excessive voltage away from sensitive components by providing a low-impedance path to ground during voltage spikes.

  5. What are the key features of MXLP4KE13CAE3?

    • MXLP4KE13CAE3 features low clamping voltage, fast response time, and high surge current capability, making it effective in protecting against transient events.

  6. Can MXLP4KE13CAE3 be used in high-frequency applications?

    • Yes, MXLP4KE13CAE3 can be used in high-frequency applications due to its fast response time and low capacitance.

  7. Is MXLP4KE13CAE3 RoHS compliant?

    • Yes, MXLP4KE13CAE3 is typically RoHS compliant, meaning it meets the Restriction of Hazardous Substances directive.

  8. What is the operating temperature range of MXLP4KE13CAE3?

    • The operating temperature range of MXLP4KE13CAE3 is usually -55°C to 150°C, making it suitable for a wide range of environments.

  9. How should MXLP4KE13CAE3 be mounted on a PCB?

    • MXLP4KE13CAE3 should be mounted close to the protected circuitry and with short traces to minimize inductance and maximize its effectiveness.

  10. Are there any recommended handling precautions for MXLP4KE13CAE3?

    • It is recommended to follow proper ESD (electrostatic discharge) handling procedures when working with MXLP4KE13CAE3 to prevent damage to the device.