Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MXLP6KE82CA
詳細を表示 DataSheets

MXLP6KE82CA Product Overview

Introduction

The MXLP6KE82CA is a high-performance electronic component designed for use in surge protection applications. This entry provides an in-depth overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Surge Protection Component
  • Use: Protects electronic circuits from voltage surges
  • Characteristics: High surge current capability, low clamping voltage, fast response time
  • Package: Through-hole or surface mount
  • Essence: Provides robust protection against transient overvoltage conditions
  • Packaging/Quantity: Available in reels or bulk packaging

Specifications

  • Maximum Peak Pulse Current: 6kA
  • Standoff Voltage: 82V
  • Operating Temperature Range: -55°C to +175°C
  • Mounting Type: Through Hole or Surface Mount
  • Package / Case: DO-214AC, SMA

Detailed Pin Configuration

The MXLP6KE82CA features a standard pin configuration with two leads for through-hole mounting or surface mount pads for SMD applications.

Functional Features

  • High Surge Current Capability: Capable of handling large transient currents without degradation.
  • Low Clamping Voltage: Provides effective protection by limiting the voltage across the circuit.
  • Fast Response Time: Quickly responds to transient voltage spikes, safeguarding sensitive electronics.

Advantages and Disadvantages

Advantages

  • Robust surge protection
  • Wide operating temperature range
  • Compact form factor

Disadvantages

  • Limited to specific voltage and current ratings
  • May require additional components for comprehensive surge protection in complex systems

Working Principles

The MXLP6KE82CA operates on the principle of avalanche breakdown, where it rapidly diverts excess energy away from the protected circuit when a voltage surge occurs. This prevents the voltage from reaching damaging levels and ensures the integrity of the connected electronics.

Detailed Application Field Plans

The MXLP6KE82CA is ideally suited for use in various applications, including: - Power supply units - Telecommunication equipment - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

  • MXLP6KE100CA: Higher standoff voltage (100V)
  • MXLP10KE82CA: Higher peak pulse current (10kA) at the same standoff voltage (82V)
  • MXLP6KE120CA: Higher standoff voltage (120V) with similar peak pulse current (6kA)

In conclusion, the MXLP6KE82CA offers reliable surge protection for a wide range of electronic applications, making it an essential component in safeguarding sensitive circuits from transient voltage events.

Word count: 398

技術ソリューションにおける MXLP6KE82CA の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is MXLP6KE82CA?

    • MXLP6KE82CA is a type of transient voltage suppressor diode used to protect electronic circuits from voltage spikes and transients.

  2. What is the maximum voltage rating for MXLP6KE82CA?

    • The maximum voltage rating for MXLP6KE82CA is 68 volts.

  3. What is the peak pulse power handling capability of MXLP6KE82CA?

    • MXLP6KE82CA can handle peak pulse power up to 600 watts.

  4. What are the typical applications of MXLP6KE82CA?

    • MXLP6KE82CA is commonly used in surge protection for telecommunications equipment, industrial controls, automotive systems, and consumer electronics.

  5. What is the response time of MXLP6KE82CA to voltage transients?

    • MXLP6KE82CA has a very fast response time, typically in the nanosecond range.

  6. How does MXLP6KE82CA compare to other transient voltage suppressors?

    • MXLP6KE82CA offers high surge capability and low clamping voltage, making it suitable for demanding applications.

  7. Can MXLP6KE82CA be used in high-speed data lines?

    • Yes, MXLP6KE82CA is suitable for protecting high-speed data lines such as Ethernet, USB, and HDMI interfaces.

  8. What is the operating temperature range for MXLP6KE82CA?

    • MXLP6KE82CA can operate within a temperature range of -55°C to 175°C.

  9. Does MXLP6KE82CA require any external components for proper operation?

    • MXLP6KE82CA does not require any external components and can be directly connected across the circuit being protected.

  10. Is MXLP6KE82CA RoHS compliant?

    • Yes, MXLP6KE82CA is compliant with the Restriction of Hazardous Substances (RoHS) directive, making it suitable for use in environmentally conscious applications.